R31 R31 made its first trial flight, lasting two hours, in July 1918, under the command of
Squadron Leader W.C. Hinks. A top speed of was achieved, well above the expected , and faster than any other airship then in service. It was originally powered by six
Rolls-Royce Eagle engines, but in view of the performance and to reduce fuel consumption, one was removed, reducing the maximum speed to a still satisfactory ; similarly, the
R32 was built with six engines, and later converted to a five-engine configuration. The R31 airship was finally commissioned on 6 November 1918, just before the armistice with Germany, after having spent four hours in the air. It set off, again under the command of Squadron Leader Hincks, for the airship base at
East Fortune in Scotland. On the journey, she encountered bad weather, and it was feared that some of the
plywood girders were failing, so she diverted to the airship base at
Howden in the
East Riding of Yorkshire for examination and repair. The sheds had not been repaired since the
R27 had caught fire three months earlier, and the roof leaked badly. This caused the glue holding the plywood together to deteriorate; as a result the airship became unairworthy, and was beyond repair. In February 1919, it was dismantled. The covering was removed and returned to Cardington, while the frames were sold for £200; these were broken up and sold for firewood, but due to the fireproofing treatment they had received, they would not burn.
R32 After being formally accepted by the
Royal Navy,
R32 made its first trial flight on 3 September 1919, and then on 6 September went to
RNAS Pulham, Norfolk. On 10 September, in formation with the
R33, she made a flight over the Netherlands, Belgium and Northern France and back to Pulham. In October 1919, the
R32 with the rest of the airship fleet was formally handed over to the
Royal Air Force. The airship was used by the
National Physical Laboratory for structural testing. On 20 March 1920, it was flown to Howden to be refurbished and used for crew training by the American party, who had come to accept the
R38 (ZR-2). When the metal-framed
R80 became available, the use of the by now obsolete wooden-framed
R32 stopped, and, to save money, it was decommissioned and used to assess the effect of a gas-bag bursting. Once the covering had been removed, and the engines taken away, cell No.18 was overpressurised until the expansion caused the bracing and structure to fail. The frame was subsequently dismantled. ==Operators==