Complex polytope

The complex line \mathbb{C}^1 has one dimension with real coordinates and another with imaginary coordinates. Applying real coordinates to both dimensions is said to give it two dimensions over the real numbers. A real plane, with the imaginary axis labelled as such, is called an Argand diagram. Because of this it is sometimes called the complex plane. Complex 2-space (also sometimes called the complex plane) may be considered as a four-dimensional space over the reals. Likewise, complex n-space may be viewed as a real 2n-dimensional vector space. A complex n-polytope in complex n-space is the analogue of a real n-polytope in real n-space. However, there is no natural complex analogue of the ordering of points on a real line (or of the associated combinatorial properties). Because of this a complex polytope cannot be seen as a contiguous surface and it does not bound an interior in the way that a real polytope does. In the case of regular polytopes, a precise definition can be made by using the notion of symmetry. For any regular polytope the symmetry group (here a complex reflection group, called a Shephard group) acts transitively on the flags, that is, on the nested sequences of a point contained in a line contained in a plane and so on. More fully, say that a collection P of affine subspaces (or flats) of a complex unitary space V of dimension n is a regular complex polytope if it meets the following conditions: • for every , if is a flat in P of dimension i and is a flat in P of dimension k such that then there are at least two flats G in P of dimension j such that ; • for every such that , if are flats of P of dimensions i, j, then the set of flats between F and G is connected, in the sense that one can get from any member of this set to any other by a sequence of containments; and • the subset of unitary transformations of V that fix P are transitive on the flags of flats of P (with of dimension i for all i). (Here, a flat of dimension −1 is taken to mean the empty set.) Thus, by definition, regular complex polytopes are configurations in complex unitary space. The regular complex polytopes were discovered by Shephard (1952), and the theory was further developed by Coxeter (1974). A complex polytope exists in the complex space of equivalent dimension. For example, the vertices of a complex polygon are points in the complex plane \mathbb{C}^2 (a plane in which each point has two complex numbers as its coordinates, not to be confused with the Argand plane of complex numbers), and the edges are complex lines \mathbb{C}^1 existing as (affine) subspaces of the plane and intersecting at the vertices. Thus, as a one-dimensional complex space, an edge can be given its own coordinate system, within which the points of the edge are each represented by a single complex number. In a regular complex polytope the vertices incident on the edge are arranged symmetrically about their centroid, which is often used as the origin of the edge's coordinate system (in the real case the centroid is just the midpoint of the edge). The symmetry arises from a complex reflection about the centroid; this reflection will leave the magnitude of any vertex unchanged, but change its argument by a fixed amount, moving it to the coordinates of the next vertex in order. So we may assume (after a suitable choice of scale) that the vertices on the edge satisfy the equation x^p - 1 = 0 where p is the number of incident vertices. Thus, in the Argand diagram of the edge, the vertex points lie at the vertices of a regular polygon centered on the origin. Three real projections of regular complex polygon 4{4}2 are illustrated above, with edges a, b, c, d, e, f, g, h. It has 16 vertices, which for clarity have not been individually marked. Each edge has four vertices and each vertex lies on two edges, hence each edge meets four other edges. In the first diagram, each edge is represented by a square. The sides of the square are not parts of the polygon but are drawn purely to help visually relate the four vertices. The edges are laid out symmetrically. (Note that the diagram looks similar to the B4 Coxeter plane projection of the tesseract, but it is structurally different). The middle diagram abandons octagonal symmetry in favour of clarity. Each edge is shown as a real line, and each meeting point of two lines is a vertex. The connectivity between the various edges is clear to see. The last diagram gives a flavour of the structure projected into three dimensions: the two cubes of vertices are in fact the same size but are seen in perspective at different distances away in the fourth dimension. == Regular complex one-dimensional polytopes ==

as regular polygons for p = 2, 3, 4, 5, and 6, with black vertices. The centroid of the p vertices is shown seen in red. The sides of the polygons represent one application of the symmetry generator, mapping each vertex to the next counterclockwise copy. These polygonal sides are not edge elements of the polytope, as a complex 1-polytope can have no edges (it often is a complex edge) and only contains vertex elements. A real 1-dimensional polytope exists as a closed segment in the real line \mathbb{R}^1, defined by its two end points or vertices in the line. Its Schläfli symbol is {} . Analogously, a complex 1-polytope exists as a set of p vertex points in the complex line \mathbb{C}^1. These may be represented as a set of points in an Argand diagram (x,y)=x+iy. A regular complex 1-dimensional polytope p{} has p (p ≥ 2) vertex points arranged to form a convex regular polygon {p} in the Argand plane. Unlike points on the real line, points on the complex line have no natural ordering. Thus, unlike real polytopes, no interior can be defined. Despite this, complex 1-polytopes are often drawn, as here, as a bounded regular polygon in the Argand plane. A regular real 1-dimensional polytope is represented by an empty Schläfli symbol {}, or Coxeter-Dynkin diagram . The dot or node of the Coxeter-Dynkin diagram itself represents a reflection generator while the circle around the node means the generator point is not on the reflection, so its reflective image is a distinct point from itself. By extension, a regular complex 1-dimensional polytope in \mathbb{C}^1 has Coxeter-Dynkin diagram , for any positive integer p, 2 or greater, containing p vertices. p can be suppressed if it is 2. It can also be represented by an empty Schläfli symbol p{}, }p{, {}p, or p{2}1. The 1 is a notational placeholder, representing a nonexistent reflection, or a period 1 identity generator. (A 0-polytope, real or complex is a point, and is represented as } {, or 1{2}1.) The symmetry is denoted by the Coxeter diagram , and can alternatively be described in Coxeter notation as p[], []p or ]p[, p[2]1 or p[1]p. The symmetry is isomorphic to the cyclic group, order p. The subgroups of p[] are any whole divisor d, d[], where d≥2. A unitary operator generator for is seen as a rotation by 2π/p radians counter clockwise, and a edge is created by sequential applications of a single unitary reflection. A unitary reflection generator for a 1-polytope with p vertices is . When p = 2, the generator is eπi = –1, the same as a point reflection in the real plane. In higher complex polytopes, 1-polytopes form p-edges. A 2-edge is similar to an ordinary real edge, in that it contains two vertices, but need not exist on a real line. ==Regular complex polygons==

While 1-polytopes can have unlimited p, finite regular complex polygons, excluding the double prism polygons p{4}2, are limited to 5-edge (pentagonal edges) elements, and infinite regular apeirogons also include 6-edge (hexagonal edges) elements. Notations Shephard's modified Schläfli notation Shephard originally devised a modified form of Schläfli's notation for regular polytopes. For a polygon bounded by p1-edges, with a p2-set as vertex figure and overall symmetry group of order g, we denote the polygon as p1(g)p2. The number of vertices V is then g/p2 and the number of edges E is g/p1. The complex polygon illustrated above has eight square edges (p1=4) and sixteen vertices (p2=2). From this we can work out that g = 32, giving the modified Schläfli symbol 4(32)2. Coxeter's revised modified Schläfli notation A more modern notation p1{q}p2 is due to Coxeter, and is based on group theory. As a symmetry group, its symbol is p1[q]p2. The symmetry group p1[q]p2 is represented by 2 generators R1, R2, where: R1p1 = R2p2 = I. If q is even, (R2R1)q/2 = (R1R2)q/2. If q is odd, (R2R1)(q−1)/2R2 = (R1R2)(q−1)/2R1. When q is odd, p1=p2. For 4[4]2 has R14 = R22 = I, (R2R1)2 = (R1R2)2. For 3[5]3 has R13 = R23 = I, (R2R1)2R2 = (R1R2)2R1. Coxeter-Dynkin diagrams Coxeter also generalised the use of Coxeter-Dynkin diagrams to complex polytopes, for example the complex polygon p{q}r is represented by and the equivalent symmetry group, p[q]r, is a ringless diagram . The nodes p and r represent mirrors producing p and r images in the plane. Unlabeled nodes in a diagram have implicit 2 labels. For example, a real regular polygon is 2{q}2 or {q} or . One limitation, nodes connected by odd branch orders must have identical node orders. If they do not, the group will create "starry" polygons, with overlapping element. So and are ordinary, while is starry. 12 Irreducible Shephard groups File:Rank2_shephard_subgroups.png|thumb|12 irreducible Shephard groups with their subgroup index relations. Subgroups index 2 relate by removing a real reflection:p[2q]2 → p[q]p, index 2.p[4]q → p[q]p, index q. File:Rank2_shephard_subgroups2_series.png|thumb|p[4]2 subgroups: p=2,3,4...p[4]2 → [p], index pp[4]2 → p[]×p[], index 2 Coxeter enumerated this list of regular complex polygons in \mathbb{C}^2. A regular complex polygon, p{q}r or , has p-edges, and r-gonal vertex figures. p{q}r is a finite polytope if (p+r)q>pr(q-2). Its symmetry is written as p[q]r, called a Shephard group, analogous to a Coxeter group, while also allowing unitary reflections. For nonstarry groups, the order of the group p[q]r can be computed as g = 8/q \cdot (1/p+2/q+1/r-1)^{-2}. The Coxeter number for p[q]r is h = 2/(1/p+2/q+1/r-1), so the group order can also be computed as g = 2h^2/q. A regular complex polygon can be drawn in orthogonal projection with h-gonal symmetry. The rank 2 solutions that generate complex polygons are: Excluded solutions with odd q and unequal p and r are: 6[3]2, 6[3]3, 9[3]3, 12[3]3, ..., 5[5]2, 6[5]2, 8[5]2, 9[5]2, 4[7]2, 9[5]2, 3[9]2, and 3[11]2. Other whole q with unequal p and r, create starry groups with overlapping fundamental domains: , , , , , and . The dual polygon of p{q}r is r{q}p. A polygon of the form p{q}p is self-dual. Groups of the form p[2q]2 have a half symmetry p[q]p, so a regular polygon is the same as quasiregular . As well, regular polygon with the same node orders, , have an alternated construction , allowing adjacent edges to be two different colors. The group order, g, is used to compute the total number of vertices and edges. It will have g/r vertices, and g/p edges. When p=r, the number of vertices and edges are equal. This condition is required when q is odd. Matrix generators The group p[q]r, , can be represented by two matrices: With : k=\sqrt \frac{ cos(\frac{\pi}{p}-\frac{\pi}{r})+cos(\frac{2\pi}{q}) }{2\sin\frac{\pi}{p}\sin\frac{\pi}{r} } ;Examples Enumeration of regular complex polygons Coxeter enumerated the complex polygons in Table III of Regular Complex Polytopes. Visualizations of regular complex polygons Polygons of the form p{2r}q can be visualized by q color sets of p-edge. Each p-edge is seen as a regular polygon, while there are no faces. ;2D orthogonal projections of complex polygons 2{r}q: Polygons of the form 2{4}q are called generalized orthoplexes. They share vertices with the 4D q-q duopyramids, vertices connected by 2-edges. Complex bipartite graph square.svg|2{4}2, , with 4 vertices, and 4 edges Complex polygon 2-4-3-bipartite graph.png|2{4}3, , with 6 vertices, and 9 edges Complex polygon 2-4-4 bipartite graph.png|2{4}4, , with 8 vertices, and 16 edges Complex polygon 2-4-5-bipartite graph.png|2{4}5, , with 10 vertices, and 25 edges 6-generalized-2-orthoplex.svg|2{4}6, , with 12 vertices, and 36 edges 7-generalized-2-orthoplex.svg|2{4}7, , with 14 vertices, and 49 edges 8-generalized-2-orthoplex.svg|2{4}8, , with 16 vertices, and 64 edges 9-generalized-2-orthoplex.svg|2{4}9, , with 18 vertices, and 81 edges 10-generalized-2-orthoplex.svg|2{4}10, , with 20 vertices, and 100 edges ;Complex polygons p{4}2: Polygons of the form p{4}2 are called generalized hypercubes (squares for polygons). They share vertices with the 4D p-p duoprisms, vertices connected by p-edges. Vertices are drawn in green, and p-edges are drawn in alternate colors, red and blue. The perspective is distorted slightly for odd dimensions to move overlapping vertices from the center. 2-generalized-2-cube.svg|2{4}2, or , with 4 vertices, and 4 2-edges 3-generalized-2-cube_skew.svg|3{4}2, or , with 9 vertices, and 6 (triangular) 3-edges Complex_polygon_3-8-2.svg|3{8}2, or , with 72 vertices in black, and 48 3-edges colored in 2 sets of 3-edges in red and blue ;2D orthogonal projections of complex polygons, p{r}p: Polygons of the form p{r}p have equal number of vertices and edges. They are also self-dual. Complex polygon 3-3-3.svg|3{3}3, or , with 8 vertices in black, and 8 3-edges colored in 2 sets of 3-edges in red and blue Complex_polygon_3-4-3-fill1.png|3{4}3, or , with 24 vertices and 24 3-edges shown in 3 sets of colors, one set filled Complex polygon 4-3-4.png|4{3}4, or , with 24 vertices and 24 4-edges shown in 4 sets of colors Complex polygon 5-3-5.png|5{3}5, or , with 120 vertices and 120 5-edges ==Regular complex polytopes==

In general, a regular complex polytope is represented by Coxeter as p{z1}q{z2}r{z3}s... or Coxeter diagram ..., having symmetry p[z1]q[z2]r[z3]s... or .... There are infinite families of regular complex polytopes that occur in all dimensions, generalizing the hypercubes and cross polytopes in real space. Shephard's "generalized orthotope" generalizes the hypercube; it has symbol given by γ = p{4}2{3}2...2{3}2 and diagram .... Its symmetry group has diagram p[4]2[3]2...2[3]2; in the Shephard–Todd classification, this is the group G(p, 1, n) generalizing the signed permutation matrices. Its dual regular polytope, the "generalized cross polytope", is represented by the symbol β = 2{3}2{3}2...2{4}p and diagram .... A 1-dimensional regular complex polytope in \mathbb{C}^1 is represented as , having p vertices, with its real representation a regular polygon, {p}. Coxeter also gives it symbol γ or β as 1-dimensional generalized hypercube or cross polytope. Its symmetry is p[] or , a cyclic group of order p. In a higher polytope, p{} or represents a p-edge element, with a 2-edge, {} or , representing an ordinary real edge between two vertices. The dual of a regular complex polytope has a reversed symbol. Regular complex polytopes with symmetric symbols, i.e. p{q}p, p{q}r{q}p, p{q}r{s}r{q}p, etc. are self dual. Enumeration of regular complex polyhedra Coxeter enumerated this list of nonstarry regular complex polyhedra in \mathbb{C}^3, including the 5 platonic solids in \mathbb{R}^3. A regular complex polyhedron, p{n1}q{n2}r or , has faces, edges, and vertex figures. A complex regular polyhedron p{n1}q{n2}r requires both g1 = order(p[n1]q) and g2 = order(q[n2]r) be finite. Given g = order(p[n1]q[n2]r), the number of vertices is g/g2, and the number of faces is g/g1. The number of edges is g/pr. Visualizations of regular complex polyhedra ;2D orthogonal projections of complex polyhedra, p{s}t{r}r: 3-simplex t0.svg|Real {3,3}, or has 4 vertices, 6 edges, and 4 faces Complex polyhedron 3-3-3-3-3-one-blue-face.png|3{3}3{3}3, or , has 27 vertices, 72 3-edges, and 27 faces, with one face highlighted blue. Complex polyhedron 2-4-3-3-3_blue-edge.png|2{4}3{3}3, has 54 vertices, 216 simple edges, and 72 faces, with one face highlighted blue. Complex polyhedron 3-3-3-4-2-one-blue-face.png|3{3}3{4}2, or , has 72 vertices, 216 3-edges, and 54 vertices, with one face highlighted blue. ;Generalized octahedra Generalized octahedra have a regular construction as and quasiregular form as . All elements are simplexes. Complex tripartite graph octahedron.svg|Real {3,4}, or , with 6 vertices, 12 edges, and 8 faces 3-generalized-3-orthoplex-tripartite.svg|2{3}2{4}3, or , with 9 vertices, 27 edges, and 27 faces 4-generalized-3-orthoplex.svg|2{3}2{4}4, or , with 12 vertices, 48 edges, and 64 faces 5-generalized-3-orthoplex.svg|2{3}2{4}5, or , with 15 vertices, 75 edges, and 125 faces 6-generalized-3-orthoplex.svg|2{3}2{4}6, or , with 18 vertices, 108 edges, and 216 faces 7-generalized-3-orthoplex.svg|2{3}2{4}7, or , with 21 vertices, 147 edges, and 343 faces 8-generalized-3-orthoplex.svg|2{3}2{4}8, or , with 24 vertices, 192 edges, and 512 faces 9-generalized-3-orthoplex.svg|2{3}2{4}9, or , with 27 vertices, 243 edges, and 729 faces 10-generalized-3-orthoplex.svg|2{3}2{4}10, or , with 30 vertices, 300 edges, and 1000 faces ;Generalized cubes Generalized cubes have a regular construction as and prismatic construction as , a product of three p-gonal 1-polytopes. Elements are lower dimensional generalized cubes. 2-generalized-3-cube.svg|Real {4,3}, or has 8 vertices, 12 edges, and 6 faces 3-generalized-3-cube.svg|3{4}2{3}2, or has 27 vertices, 27 3-edges, and 9 faces For each dimension there are 12 apeirotopes symbolized as δ exists in any dimensions \mathbb{C}^n, or \mathbb{R}^n if p=q=2. Coxeter calls these generalized cubic honeycombs for n>2. Each has proportional element counts given as: :k-faces = {n \choose k}p^{n-k}r^k , where {n \choose m}=\frac{n!}{m!\,(n-m)!} and n! denotes the factorial of n. Regular complex 1-polytopes The only regular complex 1-polytope is ∞{}, or . Its real representation is an apeirogon, {∞}, or . Regular complex apeirogons Rank 2 complex apeirogons have symmetry p[q]r, where 1/p + 2/q + 1/r = 1. Coxeter expresses them as δ where q is constrained to satisfy . There are 8 solutions: There are two excluded solutions odd q and unequal p and r: 10[5]2 and 12[3]4, or and . A regular complex apeirogon p{q}r has p-edges and r-gonal vertex figures. The dual apeirogon of p{q}r is r{q}p. An apeirogon of the form p{q}p is self-dual. Groups of the form p[2q]2 have a half symmetry p[q]p, so a regular apeirogon is the same as quasiregular . Apeirogons can be represented on the Argand plane share four different vertex arrangements. Apeirogons of the form 2{q}r have a vertex arrangement as {q/2,p}. The form p{q}2 have vertex arrangement as r{p,q/2}. Apeirogons of the form p{4}r have vertex arrangements {p,r}. Including affine nodes, and \mathbb{C}^2, there are 3 more infinite solutions: ∞[2]∞, ∞[4]2, ∞[3]3, and , , and . The first is an index 2 subgroup of the second. The vertices of these apeirogons exist in \mathbb{C}^1. Regular complex apeirohedra There are 22 regular complex apeirohedra in \mathbb{C}^2 of the form p{a}q{b}r. 8 are self-dual (p=r and a=b), while 14 exist as dual polytope pairs. Three are entirely real (p=q=r=2). Coxeter symbolizes 12 of them as δ or p{4}2{4}r is the regular form of the product apeirotope δ × δ or p{q}r × p{q}r, where q is determined from p and r. is the same as , as well as , for p,r=2,3,4,6. Also = . Regular complex 3-apeirotopes There are 16 regular complex apeirotopes in \mathbb{C}^3. Coxeter expresses 12 of them by δ where q is constrained to satisfy . These can also be decomposed as product apeirotopes: = . The first case is the \mathbb{R}^3 cubic honeycomb. Regular complex 4-apeirotopes There are 15 regular complex apeirotopes in \mathbb{C}^4. Coxeter expresses 12 of them by δ where q is constrained to satisfy . These can also be decomposed as product apeirotopes: = . The first case is the \mathbb{R}^4 tesseractic honeycomb. The 16-cell honeycomb and 24-cell honeycomb are real solutions. The last solution is generated has Witting polytope elements. Regular complex 5-apeirotopes and higher There are only 12 regular complex apeirotopes in \mathbb{C}^5 or higher, expressed δ where q is constrained to satisfy . These can also be decomposed a product of n apeirogons: ... = ... . The first case is the real \mathbb{R}^n hypercube honeycomb. van Oss polygon A van Oss polygon is a regular polygon in the plane (real plane \mathbb{R}^2, or unitary plane \mathbb{C}^2) in which both an edge and the centroid of a regular polytope lie, and formed of elements of the polytope. Not all regular polytopes have Van Oss polygons. For example, the van Oss polygons of a real octahedron are the three squares whose planes pass through its center. In contrast a cube does not have a van Oss polygon because the edge-to-center plane cuts diagonally across two square faces and the two edges of the cube which lie in the plane do not form a polygon. Infinite honeycombs also have van Oss apeirogons. For example, the real square tiling and triangular tiling have apeirogons {∞} van Oss apeirogons. If it exists, the van Oss polygon of regular complex polytope of the form p{q}r{s}t... has p-edges. ==Non-regular complex polytopes==

Product complex polytopes Some complex polytopes can be represented as Cartesian products. These product polytopes are not strictly regular since they'll have more than one facet type, but some can represent lower symmetry of regular forms if all the orthogonal polytopes are identical. For example, the product p{}×p{} or of two 1-dimensional polytopes is the same as the regular p{4}2 or . More general products, like p{}×q{} have real representations as the 4-dimensional p-q duoprisms. The dual of a product polytope can be written as a sum p{}+q{} and have real representations as the 4-dimensional p-q duopyramid. The p{}+p{} can have its symmetry doubled as a regular complex polytope 2{4}p or . Similarly, a \mathbb{C}^3 complex polyhedron can be constructed as a triple product: p{}×p{}×p{} or is the same as the regular generalized cube, p{4}2{3}2 or , as well as product p{4}2×p{} or . Quasiregular polygons A quasiregular polygon is a truncation of a regular polygon. A quasiregular polygon contains alternate edges of the regular polygons and . The quasiregular polygon has p vertices on the p-edges of the regular form. Quasiregular apeirogons There are 7 quasiregular complex apeirogons which alternate edges of a regular apeirogon and its regular dual. The vertex arrangements of these apeirogon have real representations with the regular and uniform tilings of the Euclidean plane. The last column for the 6{3}6 apeirogon is not only self-dual, but the dual coincides with itself with overlapping hexagonal edges, thus their quasiregular form also has overlapping hexagonal edges, so it can't be drawn with two alternating colors like the others. The symmetry of the self-dual families can be doubled, so creating an identical geometry as the regular forms: = Quasiregular polyhedra Like real polytopes, a complex quasiregular polyhedron can be constructed as a rectification (a complete truncation) of a regular polyhedron. Vertices are created mid-edge of the regular polyhedron and faces of the regular polyhedron and its dual are positioned alternating across common edges. For example, a p-generalized cube, , has p3 vertices, 3p2 edges, and 3p p-generalized square faces, while the p-generalized octahedron, , has 3p vertices, 3p2 edges and p3 triangular faces. The middle quasiregular form p-generalized cuboctahedron, , has 3p2 vertices, 3p3 edges, and 3p+p3 faces. Also the rectification of the Hessian polyhedron , is , a quasiregular form sharing the geometry of the regular complex polyhedron . Other complex polytopes with unitary reflections of period two Other nonregular complex polytopes can be constructed within unitary reflection groups that don't make linear Coxeter graphs. In Coxeter diagrams with loops Coxeter marks a special period interior, like or symbol (11 1 1)3, and group [1 1 1]3. These complex polytopes have not been systematically explored beyond a few cases. The group is defined by 3 unitary reflections, R1, R2, R3, all order 2: R12 = R12 = R32 = (R1R2)3 = (R2R3)3 = (R3R1)3 = (R1R2R3R1)p = 1. The period p can be seen as a double rotation in real \mathbb{R}^4. As with all Wythoff constructions, polytopes generated by reflections, the number of vertices of a single-ringed Coxeter diagram polytope is equal to the order of the group divided by the order of the subgroup where the ringed node is removed. For example, a real cube has Coxeter diagram , with octahedral symmetry order 48, and subgroup dihedral symmetry order 6, so the number of vertices of a cube is 48/6=8. Facets are constructed by removing one node furthest from the ringed node, for example for the cube. Vertex figures are generated by removing a ringed node and ringing one or more connected nodes, and for the cube. Coxeter represents these groups by the following symbols. Some groups have the same order, but a different structure, defining the same vertex arrangement in complex polytopes, but different edges and higher elements, like and with p≠3. Coxeter calls some of these complex polyhedra almost regular because they have regular facets and vertex figures. The first is a lower symmetry form of the generalized cross-polytope in \mathbb{C}^3. The second is a fractional generalized cube, reducing p-edges into single vertices leaving ordinary 2-edges. Three of them are related to the finite regular skew polyhedron in \mathbb{R}^4. }||rowspan=2|54 ||(1 1 11)3 || 9||27 || {3} ||{6}||align=left| Shephard symbol (1 1; 11)3same as β = Coxeter defines other groups with anti-unitary constructions, for example these three. The first was discovered and drawn by Peter McMullen in 1966. Visualizations Complex_polyhedron_almost_regular_42_vertices.png|(1 1 114)4, has 42 vertices, 168 edges and 112 triangular faces, seen in this 14-gonal projection. Complex polyhedron almost regular 46 vertices.png|(14 14 11)(3), has 56 vertices, 168 edges and 84 square faces, seen in this 14-gonal projection. Complex_4-polytope_almost_regular_80_vertices.png|(1 1 22)4, has 80 vertices, 640 edges, 1280 triangular faces and 640 tetrahedral cells, seen in this 20-gonal projection. == See also ==