Respiratory droplet

Respiratory droplets from humans include various cells types (e.g. epithelial cells and cells of the immune system), physiological electrolytes contained in mucus and saliva (e.g. Na+, K+, Cl−), and, potentially, various pathogens. ==Formation==

Respiratory droplets can be produced in many ways. They can be produced naturally as a result of breathing, talking, sneezing, coughing, or singing. They can also be artificially generated in healthcare settings by aerosol-generating procedures such as intubation, cardiopulmonary resuscitation (CPR), bronchoscopy, surgery, and autopsy. Similar droplets may be formed through vomiting, flushing toilets, wet-cleaning surfaces, showering or using tap water, or spraying graywater for agricultural purposes. Depending on the method of formation, respiratory droplets may also contain salts, cells, and virus particles. Speech A saliva spittle or saliva spray is a particle of saliva involuntarily expelled from the mouth during speech, especially during vigorous articulation or the pronunciation of explosive consonants (such as /p/, /b/, /t/). These droplets are produced by fluid dynamics in the oral cavity rather than by pulmonary exhalation. They form when tongue movements, lip bursts, or airflow turbulence disrupt the thin saliva film coating the mouth, ejecting droplets into the air. Saliva spittles are typically: • Larger (from 100 μm to few mm in diameter) than respiratory aerosols (<5 μm) completely visible and noticeable on the face of the listening person and they even remain as visible marks on the mobile phone screen after speaking hands-free • Projected short distances (usually <1 meter) due to their mass, though forceful speech can extend their range. • Composed of saliva, oral mucus, and potential oral microbiota (e.g., Streptococcus). ==Transport==

Different methods of formation create droplets of different size and initial speed, which affect their transport and fate in the air. As described by the Wells curve, the largest droplets fall sufficiently fast that they usually settle to the ground or another surface before drying out, and droplets smaller than 100 μm will rapidly dry out, before settling on a surface. Once dry, they become solid droplet nuclei consisting of the non-volatile matter initially in the droplet. Respiratory droplets can also interact with other particles of non-biological origin in the air, which are more numerous than them. When people are in close contact, liquid droplets produced by one person may be inhaled by another person; droplets larger than 10 μm tend to remain trapped in the nose and throat while smaller droplets will penetrate to the lower respiratory system. Advanced computational fluid dynamics (CFD) showed that at wind speeds varying from 4 to 15 km/h, respiratory droplets may travel up to 6 meters. == Role in disease transmission ==

s (green), surfactant proteins and lipids (blue) and a coronavirus particle (pink) A common form of disease transmission is by way of respiratory droplets, generated by coughing, sneezing, or talking. Respiratory droplet transmission is the usual route for respiratory infections. Transmission can occur when respiratory droplets reach susceptible mucosal surfaces, such as in the eyes, nose, or mouth. This can also happen indirectly via contact with contaminated surfaces when hands then touch the face. Respiratory droplets are large and cannot remain suspended in the air for long, and are usually dispersed over short distances. Viruses that are spread by droplet transmission include influenza virus, rhinovirus, respiratory syncytial virus, enterovirus, and norovirus; measles morbillivirus; and coronaviruses such as SARS coronavirus (SARS-CoV-1), Bacterial and fungal infection agents may also be transmitted by respiratory droplets. It has been noted that during the 2002–2004 SARS outbreak, use of surgical masks and N95 respirators tended to decrease infections of healthcare workers. However, surgical masks are much less good at filtering out small droplets and particles than N95 and similar respirators, so the respirators offer greater protection. Modern studies have quantified their role in disease spread, particularly during the COVID-19 pandemic, where masks reduced their dispersion by 99%. Also, higher ventilation rates can be used as a hazard control to dilute and remove respiratory particles. However, if unfiltered or insufficiently filtered air is exhausted to another location, it can lead to spreading of an infection. == Scientific and social relevance ==

• Communication hygiene: • Speech droplets contribute to "spraying while talking", a noted issue in public speech, acting, and close conversations. • Studies suggest masks reduce their spread significantly. • Superspreader events (e.g., choirs, crowded debates) may involve droplet emission from speech. • Lip balm or hydration reduces droplet formation by thinning saliva. • Physical barriers (e.g., plexiglass) block speech droplets but do not block aerosols. • Theater: Actors use speech techniques to minimize them. == History ==

UK public-health-education poster. German bacteriologist Carl Flügge in 1899 was the first to show that microorganisms in droplets expelled from the respiratory tract are a means of disease transmission. In the early 20th century, the term Flügge droplet was sometimes used for particles that are large enough to not completely dry out, roughly those larger than 100 μm. Flügge's concept of droplets as primary source and vector for respiratory transmission of diseases prevailed into the 1930s until William F. Wells differentiated between large and small droplets. He developed the Wells curve, which describes how the size of respiratory droplets influences their fate and thus their ability to transmit disease. Early observations (Pre-20th century) • Ancient Rome: Rhetoricians like Quintilian (1st century CE) advised orators to avoid "excessive sputum" during speeches, suggesting early awareness of saliva projection. • 18th–19th century: French physicians coined the term postillons (from poster, "to spit") to describe visible saliva droplets emitted during speech, linking them to tuberculosis spread in close quarters. Scientific formalization (20th century) • 1930s–1940s: Studies on phonetics (e.g., by Peter Ladefoged) noted that plosive consonants (/p/, /t/, /k/) produce more droplets due to abrupt airflow. • 1970s: High-speed photography confirmed saliva ejection patterns during speech (Lighthill, 1975). Modern era (21st century) • 2019–2022: The COVID-19 pandemic spurred research into speech-generated droplets: • NIH Study (2020): Showed loud speech emits ~1,000 droplets/minute, with masks reducing counts by 99% (Anfinrud et al.). • MIT (2021): Demonstrated that "voiced" sounds (e.g., /a/, /i/) aerosolize more than whispers (Bourouiba Lab). • Cultural Shifts: Increased use of plexiglass barriers in public spaces highlighted distinctions between large speech droplets (blocked) and aerosols (not blocked). Terminology evolution • Pre-COVID: Terms like "spraying" or "spittle" were colloquial. • Post-COVID: "Speech droplets" entered technical discourse to differentiate from respiratory aerosols (e.g., WHO reports). ==See also==