First bridge The original bridge at the site was a wooden
covered bridge with six spans, probably using
Burr trusses. It was built in 1819 by a contractor named Lothrop.
Second bridge In 1859, the second Sixth Street Bridge was built by
John A. Roebling. This was his third and final bridge in Pittsburgh. His eldest son
Washington Roebling worked with him on the bridge after completing his degree in engineering. This bridge had two main spans of , with shore spans of . The floors were suspended from wire hangers, which were suspended from wire catenaries. This bridge was demolished in 1892, as it was too narrow and fragile to support modern transportation demands.
Third bridge In 1892, the third Sixth Street Bridge was built by engineer
Theodore Cooper for the Union Bridge Company. The main spans were long, each having through trusses of the camel-back type with upward-angled upper chords. The spans were twice as wide as the previous bridge. In 1927 the bridge had to be taken apart because the steelwork was too brittle for safety. That year, the main spans were somewhat trimmed down temporarily from their height. They were lowered onto barges and floated down the
Ohio River to the back channel of
Neville Island, where they were used
as part of the Coraopolis Bridge. Finally, in 1994 the steel was scrapped.
Current bridge The current bridge was completed on September 29, 1928. It is one of the
Three Sisters bridges, which include the 7th and 9th Street bridges. The three bridges are nearly identical self-anchored, eye-bar suspension types. The horizontal pull of the top cords is resisted by the steel girders along each side of the roadway. The suspension system consists of 14" eye-bars extending from end to end, having two pins on the top of each tower and carrying the roadway by 4" eye-bar suspenders at the panel points. The stiffening system consists of triple web-plate girders parallel to the road grade. The girders are subjected to stresses due to bending combined with direct compression. ==Significance==