) The common alder is used as a pioneer species and to stabilise river banks, to assist in flood control, to purify water in waterlogged soils and to moderate the temperature and nutrient status of water bodies. It can be grown by itself or in mixed species plantations, and the nitrogen-rich leaves falling to the ground enrich the soil and increase the production of such trees as
walnut,
Douglas-fir and
poplar on poor quality soils. Although the tree can live for up to 160 years, it is best felled for timber at 60 to 70 years before
heart rot sets in. On marshy ground it is important as
coppice-wood, being cut near the base to encourage the production of straight poles. It is capable of enduring clipping as well as marine climatic conditions and may be cultivated as a fast-growing
windbreak. In woodland natural regeneration is not possible as the seeds need sufficient nutrients, water and light to germinate. Such conditions are rarely found at the forest floor and as the forest matures, the alder trees in it die out. The species is cultivated as a specimen tree in parks and gardens, and the
cultivar 'Imperialis' has gained the
Royal Horticultural Society's
Award of Garden Merit.
Timber The wood is soft, white when first cut, turning to pale red; the knots are attractively mottled. The timber is not used where strength is required in the construction industry, but is used for paper-making, the manufacture of
fibreboard and the production of energy. The wood is used in joinery, both as solid timber and as
veneer, where its grain and colour are appreciated, and it takes dye well. As the wood is soft, flexible and somewhat light, it can be easily worked as well as split. It is also valued in turnery, carving, furniture making, window frames,
clogs, toys, blocks, pencils and bowls. accepts glue,
stain, paint and
finish very well and is inexpensive. All this has made it a favourite of large factories mass producing instruments.
Tanning and dyeing The bark of the common alder has long been used in tanning and dyeing. The bark and twigs contain 16 to 20%
tannic acid but their usefulness in tanning is limited by the strong accompanying colour they produce. Depending on the
mordant and the methods used, various shades of brown, fawn, and yellowish-orange hues can be imparted to wool, cotton and silk. Alder bark can also be used with
iron sulphate to create a black dye which can substitute for the use of
sumach or
galls. The
Laplanders are said to chew the bark and use their
saliva to dye leather. The shoots of the common alder produce a yellowish or cinnamon-coloured dye if cut early in the year. Other parts of the tree are also used in dyeing; the catkins can yield a green colour and the fresh-cut wood a pinkish-fawn colour.
Other uses It is also the traditional wood that is burnt to produce
smoked fish and other smoked foods, though in some areas other woods are now more often used. It supplies high quality
charcoal.
rhododendrin {3-(4-hydroxyphenyl)-l-methylpropyl-β-D-glucopyranoside} and (
penta-2,3-dienedioic acid).
Alnus glutinosa is planted on
semi-coke dumps as part of
environmental restoration projects because it encourages other plants to grow. ==References==