In fact, the term printing sheet refers only to a part of the actual
printing sheet. This is because stamps are mostly printed in four connected sheets, to make best use of the
stamp paper. At the
post office counter, only the four separated printing sheets are sold. Therefore, the sheet of stamps is also called a counter sheet or pane, though improperly called a sheet of stamps.
Gutters The empty fields connecting the single counter sheets are called
gutters. Normally they are separated in the middle after
printing in order to obtain four counter sheets. The half empty fields or gutters then form the edge of the sheet. However, from many issues, unseparated gutters with connected stamps of the neighbouring sheets come on the market (stamp - empty field - stamp). These gutters may be either empty or printed, if printed edges were intended. The
philatelist makes a distinction between
horizontal and vertical gutters. A specific characteristic of the gutters is the
heart of the printing sheet, where all four panes are connected. Gutters and hearts are very popular with
collectors and reach high
catalog prices, especially for classic issues.
Tête-bêche Single counter sheets do not always have to be separated by empty fields. Issues which were not intended to have edges were naturally manufactured without empty fields. To be able to distinguish between the single sheets better, the stamps were printed rotated 180° to each other along the separation line. Philatelists describe the two stamps which are upside down in relationship to each other as
tête-bêche. Some issues have tête-bêches as well as gutters. Like gutters, tête-bêches are very popular with collectors due to their scarcity and decorativeness. ==Stamp arrangement and location==