Silk brocades Silk
brocades, texturally, are divided mainly into two groups: •
Kimkhwab •
Pot-thans Kimkhwab (brocade) Kimkhwab was originally an elegant, heavy silk fabric with a floral or figured pattern known most for its butis and jals woven with silk as the warp and tilla as the weft, produced in China and Japan. Tilla in the earlier times was known as kasab. It was a combination of silver and tamba (copper) which was coated with a veneer of gold and silver. Kinkhwabs have also been known as ‘Kimkhabs’, ‘Kamkhwabs’, ‘Kincobs’, ‘Zar-baft’ (Gold Woven), zartari, zarkashi, mushaiar.
Kam means little or scarcely.
Khwab means a dream and it is said that even with such a name ‘Its beauty, splendor and elegance can be hardly dreamt of’. Kinkhwabs are heavy fabrics or several layers of warp threads with an elaborate all-over pattern of extra weft, which may be of silk, gold and / or silver threads or combinations. There may be three to seven layers of warp threads. (
Tipara means three layers and
Chaupara means four layers to
Satpara meaning seven layers). Kin means golden in Chinese. Its specialty is in profusely using the gold and silver thread in a manner that sometimes leaves the silk background hardly visible. When the figure work is in silver threads with a background of gold threads it is called ‘Tashi Kinkhwab’. This is a variety of kinkhwab which has a ground worked with an extra warp of gold [badla (flat wire) zari] and the pattern created with an extra weft of silver badla zari or vice versa. A satin weave is very often used, resulting in a smooth ground for the fabric. The heavy fabric appears to be in layers, as the warp ends are crammed drawing three, four and up to seven ends per dent for the Tipara, Chaupara up to Satpara respectively.
Zari is generally of two types Badla and Kala batto. Badla Zari was made of flattened gold or silver wire with the ancient method of making zari from pure metal without any core thread. This accounted for its peculiar stiffness. Sometimes cracks would develop in the metal during the process of weaving which resulted in the loss of its natural luster and smoothness. Therefore, weaving with Badla Zari was difficult and required great skill. Often a touch of Badla was given to floral motives to enhance the beauty. This type of zari has mostly gone out of favor amongst the contemporary weavers and they mostly depend on polyester or pure silk as a substitute. Silk brocade of Banaras, Ahmedabad and Surat were well known in the 17th century. While Banaras continues to be a centre of production of silk brocades, Ahmedabad and Surat have practically nothing to show today. On the other hand, silk brocade weaving has gained ground in the south of India.
Pot-thans These are called
katan (a thread prepared by twisting a different number of silk filaments) brocades. Pot-thans are lighter in textures (lower thread count) than kinkhwabs but closely woven in silk and all or certain portions of the pattern are in gold or silver zaris. These fabrics are mostly used for making expensive garments and sarees. Very often the satin ground weave is particularly used for garments fabrics. These fabrics are characterized by their jals which are normally made out of silk and tilla.
Mashru The cloth was distinguished by its butis woven in circular shapes that gave an impression of ashrafis (gold coins). The ashrafis were usually woven in gold zari. This is a mixed fabric with a woven stripe or zigzag pattern. The warp and weft used were of two different materials (silk and cotton, cotton and linen, silk and wool or wool and cotton) in different colours. It was used mostly for lower garments such as trousers, the lining of the heavy brocade garments or as furnishing.
Gul badan (the literal meaning of which is ‘flower like body’) was a known variety of mushru (cotton and silk) popular in the late 19th century. Sangi, Ganta, Ilaycha were types of mashru too. These were popular since ancient times and were known to be woven at all leading silk centres. One reason for their popularity was
Islam. Since Islam does not allow men to wear pure silk,
mashru (literally meaning permitted) became very popular amongst Muslims.
Himru or Amru A type of Indian brocade is the
Himru, a specialty of
Hyderabad and
Aurangabad, which is woven from silk and zari on silk to produce variegated designs, woven on the principle of extra weft. Himru can be very pretty with a pseudo-rich effect in general. It continued to be in popular demand on the account of its low price as compared to the pure silk brocades. Another point in its favor is that it can be woven very fine so as to give it a soft feel, thus making it more suitable as a fabric for personal wear than the true brocade. The cloth is distinguished by its intricate
char-khana (four squares) jal. These are woven like kinkhwabs, but without the use of kala battu (zari) instead badla zari is used.
Kinkhwabs Kinkhwabs fabrics of India have earned a great reputation for their craftsmanship and grandeur. By and large, still continue to do so, even in the face of fierce competition from other types of woven and printed fabrics. Kinkhwabs today are typically ornate, jacquard-woven fabrics. The pattern is usually emphasized by contrasting surfaces and colours and appears on the face of the fabric, which is distinguished easily from the back. Uses include apparel, draperies, upholstery and other decorative purposes.
Gyasar Gyasar is a silk fabric of a kinkhwab structure with ground, in which the gold thread is profusely used with Tibetan designs. The fabric is especially popular with Tibetans and used extensively in their dresses as well as in decorative hangings, prayer mats, etc. It has a standard width of 24 to 28 inches. It is popular as a ritualistic textile in Buddhist religion. It is not possible to weave on power-looms. It is a complete hand-loom product.
Gyanta Gyanta is a silk fabric of kinkhwab structure of a satin body with or without the use of gold thread. These sometimes have a tantric design (which is also known as tchingo) of human heads with three eyes woven in gold and silver threads on a black satin ground.
Jamawar "Jama" means robe and "war" is yard. The base of the
jamawar is mostly silk, with perhaps an addition of a little
polyester. The brocaded parts are woven in similar threads of silk and polyester. Most of the designs seen today are floral, with the kairy (i.e. the paisley) as the predominant motif. Today, the best jamawar is woven in
Varanasi. This fabric is widely used in the country for bridal and special occasion outfits. The texture and weave of patterns is such that the fabric often gets caught when rubbed against rough surfaces (metallic embroidery, jewellery etc.) it must therefore be handled delicately when worn.
Origin Traders introduced this Chinese silk cloth to India, mainly from Samarkand and Bukhara and it gained immense popularity among the royalty and the aristocracy. King and nobles bought the woven fabric by the yard, wearing it as a gown or using it as a wrap or shawl. Jamawar weaving centres in India developed in the holy cities and the trade centres. The most well known jamawar weaving centres were in Assam, Gujrat, Malwa and South India. Due to its rich and fine raw materials, the rich and powerful merchants used jamawar and noblemen of the time, who could not only afford it but could even commission the weavers to make the fabric for them, as in the case of the Mughals. Emperor Akbar was one of its greatest patrons. He brought many weavers from East Turkestan to Kashmir. One of the main reasons for the diversity in the designs of the jamawar cloth was the migratory nature of its weavers. Ideas from almost all parts of the world influenced these designs. The Indian motifs were greatly influenced by nature like the sun, moon, stars, rivers, trees, flowers, birds etc. The figural and geometrical motifs such as trees, lotus flower, bulls, horses, lions, elephants, peacocks, swans, eagles, the sun, stars, diagonal or zigzag lines, squares, round shapes, etc. can be traced through the entire history of jamawar and are still being used but in a rather different form in terms of intricacy and compositions, thus creating new patterns. Indian weavers predominantly used a wide variety of classical motifs such as the swan (
hamsa), the lotus (
kamala), the tree of life (
kulpa,
vriksha), the vase of plenty (
purna,
kumbha), the elephant (
hathi), the lion (
simha), flowing floral creepers (
lata patra), peacocks (
mayur) and many more.
Legendary creatures such as winged lions, centaurs, griffins, decorative of ferocious
animals, animals formally in profile or with turned heads, animals with
human figures in combat or represented in roundels were also commonly used motifs. These motifs have remained in existence for more than two thousand years. However, new patterns have consistently been introduced; sometimes some of these are even an amalgamation of the existing patterns. Such attempts at evolving new designs were particularly noticeable from the 10th century onwards, when patterns were altered to meet the specific demands of the Muslim rulers. The bull or the swan, arranged between vertical and diagonal stripes, can still be found in the silk jamawar sarees of India. Patterns with small flowers and two-coloured squares (chess board design) are seen, used both as a garment and as furnishing material – bed spreads with same kind of pattern are still woven in some parts of Gujarat. Jamawar dating back to the Mughal era however contained big, bold and realistic patterns, which were rather simple with ample space between the motifs. The designs stood out prominently against the background of the cloth. Complex patterns were developed only when additional decorative elements were included in the basic pattern. During later periods, the gap between the motifs was also filled with smaller motifs or geometrical forms. The iris and narcissus flowers became the most celebrated motifs of this era and were combined with tulips, poppies, primulas, roses and lilies. A lot of figurative motifs were also used in the Mughal era such as deer, horses, butterflies, peacocks and insects. The Mughal kings played a vital role in the enhancement of jamawar by putting their inspirations into the cloth's designing and visiting the weavers on a regular basis to supervise its making. Shining, decorative pallus were jals were the main designs of this time. The borders were usually woven with silk and zari. After the Mughal period, the figurative motifs were discouraged by the Muslims and more floral and paisleys were introduced. However, inspiration was taken from these figurative motives and put into designs as in the case of using only the peacock feathers instead of the complete figure. Another big change was brought about in 1985, where the source of inspiration was the Chinese Shanghai cloth. The patterns of the Chinese Shanghai were amended in accordance to the weave construction of the jamawar cloth and introduced in the cloth. This proved to be a very successful change and is still appreciated by many. In recent years, the Indian government has attempted a modest revival of this art by setting up a shawl-weaving centre at Kanihama in Kashmir. Efforts to revive this art have also been made by bringing in innovations like the creation of jamawar sarees by craftsmen in Varanasi. Each saree is a shimmering tapestry of intricate design, in colours that range from the traditionally deep, rich shades to delicate pastels. A minimum of four months of patient effort goes into the creation of each jamawar saree. Many of the jamawar sarees now have matching silk shawls attached to them, creating elegant ensembles fit for royalty.
Weaving of jamawar in Pakistan Pakistan makes its own yarn from the imported cocoons that come from China. The yarn is cultivated in areas like
Orangi and
Shershah in
Karachi which is then sold to the weavers. The pure silk yarn, before it can be used, has to undergo treatment such as bleaching or washing (in soap) and then dyeing. In its raw state, the silk is hard due to the sericlan; therefore it has to be removed. A single filament of the silk yarn is not strong enough to be woven on its own; therefore, it needs to be twisted in order to give it strength and hold. A specific person who is called a naqsha-bandh first draws the patterns or designs on paper which are then transferred on a graph paper on a comparatively much bigger scale. Every square in the graph signifies a specific number of threads on the loom. The unfinished, rough ideas and sketches are provided to these naqsha-bandhs by the wholesalers and are thus plotted on the graph. The use of various threads in the pattern such as zari, resham, polyester, etc. are separated on the graph with the help of colours indicated on a key chart. The wholesalers later decide the main colours and this information are forwarded to the weavers. The naqsha-bandhs do not have say in the designing of the motifs and patterns. They do what they are told to do. In this way, the pattern or motif is drawn on the graph paper to provide the weaver with the exact picture of each thread making up the design in the process of weaving. The designs and patterns are then transferred from the graph paper on a wooden frame and are referred to as the naqsha. The naqsha that is made with cotton threads is a smaller sample of the actual design, which is to be woven on the loom. The warp is then taken for the weaving process, which is carried out, on various looms such as the pit loom,
jacquard loom and power loom. There is a vast difference between the outputs of the three types of looms. The power looms cannot match the intricacy that can be achieved using the pit or jacquard loom. This is the reason for the far superior workmanship that can be found in the earlier designs dating back to the Mughal era. ==Significant regions of silk==