Sisu KB-124

The old-fashioned looking cabin of the KB-24 was modernised in the KB-124 and made more spacious to make it competitive with the Volvo Snabbe. As a drawback, the vehicle lost a part of its key strength, agility. The new Nalle could not be driven through some of the tightest curves, which the KB-24 still could handle. The total weight of the truck was increased by to and the model name was changed from KB-124 to KB-121 in 1968, after recommendation from the Ministry of Transport and Public Works. ==Production==

The main customers were Finnish government institutions. At the beginning of November 1968 the State Council approved an order of 50–60 Nalle-Sisus, of which 34 units were for Post and Telegraph Administration, 15 for the State Railways, and few units were for other public institutions. Initially the State Railways had suggested purchasing Fargo FK 500 lorries instead because their unit price was just 16 200 marks, instead of Sisu's 20 612 marks. However, the domestic origin weighed in favour of Sisus. Selecting the domestic option was not self-evident. At the time, there were many news articles for and against the domestic options. In 1971 the state chose buying 53 Fargos for a total of 1.2 million marks; the minister of transport, Kalervo Haapasalo, commented that the domestic vehicle production was "small-time business". SAT tried to end the Nalle production several times, but each time some government institution decided to order a series of a few dozen units, which the company then produced. ==Technical data==

Engine engine. At the beginning the engine selection consisted the same models which were used in the previous KB-24: and four-cylinder 3.6-litre Ford Dagenham diesel with the same output. A stronger 4-cylinder 4.16-litre Ford Dagenham diesel with 84 horsepower was introduced in 1967. Suspension is carried out by leaf springs long and wide. Both front and rear axle are equipped with telescopic shock absorbers. The standard wheel size is 7.50 – 16" and 5.50 – 20" was available as an option. The service brake consists of hydraulically operated drum brakes, which are same size on the front and the rear axle. Initially a dual-circuit system with vacuum servo was optional; later servo became standard. The handbrake works mechanically. Steering system is worm gear type. Cabin and superstructures The full-steel cabin used on lorry models represents own production of SAT. Compared to the previous model, it was more upholstered and better insulated. In cabin design the producer had paid attention on good visibility. The windscreen is split and both halves are curved. Both sides have separate windscreen wipers. An extended five-seat cabin was available as a special order. The electrical system is 12-volt and the vehicle is equipped with an 84-Ah battery. A 146-Ah battery was available as an option. In earlier models the fuel tank capacity is and it is placed on the right side. Later it was placed on the left side and the capacity was . The bus chassis were delivered with a tank which was optionally available for lorries as well. Dimensions and weights ==Characteristics==

The platform width of was good for agility, but became problematic when standard pallets became more common. The contemporary standard pallets could not be placed two-across the width. The State Railways planned to modify the vehicles by replacing the platforms with the wide type, but the plan was abandoned. ==Sources==