Snowskate

Single deck snowskates are usually made out of laminated wood with a plastic bottom or are made of solid plastic, There are grooves cut into the bottom of the board, usually 7 or 5. Single decks are preferred for riding in snowskate parks and urban terrain but can also be ridden down hills, however, they are rarely permitted on ski resorts. Snowskates of this kind are most suitable for winter skateboarding tricks. Single deck snowskates first appeared on the market in 1998, manufactured by Premier Snowskates and marketed by Andy Wolf, former member of the Nitro snowboarding team. Today the primary manufacturers are: Ambition Snowskates, Hovland Snowskates, LY Snow and Krown Skateboards. Snowskate parks became numerous when the first single deck snowskates were being sold in stores. Word of mouth quickly spread about the single deck snowskate, leading to the popularity of snowskate parks around United States. The snowskate park moved snowskating from an urban underground winter sport to a mainstream winter sport. With the introduction of the snowboard, many resorts have removed their snowskate parks, and snowskating has moved back to its underground winter sport roots. == Bi-level snowskate ==

A bi-level snowskate, also called a bideck, or snowdeck, is a snowskate that has a skateboard top-deck which the rider stands on, connected through a set of "trucks" to a ski sub-deck, which is in contact with the snow. While few, if any, mountain ski resorts permit single deck snowskate riders on ski lifts, riders of bi-level snowskates which feature a leash to prevent runaway and a metal edged sub-deck are permitted on ski lifts in many mountain resorts such as Vail in Colorado. With no bindings and no special boots needed, a snowskate can be the most affordable way to shred your local hill or mountain. Bi-level snowskates were reportedly invented by a Stevens Pass (Washington) local named Steve Frink. He came up with the idea of a skateboard with skis in 1994 while burning his skateboard in a skateboarders' ritual. In the year 2001, after many prototypes, he completed a final and finished product which he marketed under the brand "Bi-Deck Snowskates". Around the same time, snowboard manufacturer Burton Snowboards released the "Snowdeck". Burton has since stopped making snowskates. The World Championships of Snowskating was held on April 20, 2024 at Solheisen in Hemsedal, Norway with 40 competitors representing 8 countries: Norway, Sweden, Germany, Lichtenstein, El Salvador, USA, Canada, and South Africa. Bi-level snowskates differ depending on the style of riding with longer sub-decks favored for speed and carving and shorter sub-decks favored for tricks and stunts. Some current bi-level snowskate manufacturers are Hovland, Draw Snowskates, Parole Boards, Squampton Snowskates (eco-friendly, made with hemp), Harfang, Ralston, Pioneer, Fuse, florilda powderskate, 0910, Minus-7, Landyachtz, Chiller, LibTech and Boyd Hill. A complete list can be found at ItsASnowskate.Com == Less Common Snowskates ==

4x4 snowskate The least common snowskate, 4x4 snowskates, provide the most skateboard like feel. They have four small skis, each replacing a wheel, and are generally very similar to average skateboards. Powderskate Powderskates are the most surf-like snowskate. They are usually longer and have a larger surface area to keep the rider afloat as it is used in deep powder. There are two varieties; single and bi-deck. The single deck is only for use in powder, and provides the most surf-like feel, whereas the bi-level snowskates provides more leverage, and can be used on and off the powder. == History and design ==

The first snowskate traces its history to the Snurfer circa 1964. The Snurfer is considered to be the first snowboard to ever hit the market, but it could arguably be called the first snowskate, since it was without bindings. Joshua Luther first coined the phrase snowskate when he needed a way to get across town during a blizzard. Around 1970, a product called the "Snow Skate" was sold in local toy and sporting good stores. They resembled the modern day Fuse snowskate. There were two ski-like apparatuses that were attached to the area around the truck of a skateboard, allowing the skateboard to move through the snow. The "Ski" portion of the snow skate is made of a hard plastic with rubber straps that went over the skateboard wheels to hold them together. Other mentionable early snowskate brands were The "Skeeter" and the "Snodad". Designs of this early era ranged from two skiblades on the lower deck (Like the Skeeter) to four blades on the lower deck. Sometimes, the early snowskates used metal runners, similar to ice skate blades, enabling the snowskater to use the momentum to ride well. The "Snodad" came about much later in time. It was created by PNW skaters with the intent of riding fresh snow without bindings. Unfortunately the demise of the company came shortly after its official launch. It exists only as a historical "tip of the hat" to these pioneers of snowboarding without bindings. == References ==