The St Mary's Station complex includes: • Station building on Platforms 3/4, type 3, brick, second class (1888) • Signal box – non-standard, platform structure (1942) • Goods
shed – subtype 2, brick, side shed without
awning () • Two x island platforms (1888 & 1942–43) • Footbridge – steel, beam and
column structure over the platforms (1942, 1994–95) • Crane – type 1, jib crane – 5 ton, iron, Gregory & Co, San Francisco (1943)
Platforms 3/4 building, 1888 External: St Marys station building is a type 3 second class station building and is constructed of brick with centrally located waiting room flanked by attached two small wings on both ends. The waiting room has no wall on the rail side and extends by a wide
corrugated metal awning supported on timber posts and beams featuring exposed
rafters and decorative timberboards at both ends. The street elevation of the waiting room consists of four vertically proportioned timber box framed windows and a door opening with no glass or door panels. Both wing rooms are locked and secured by security grills installed on both window and door openings. Each wing features one face brick tall
chimney with corbelled top above the relatively new corrugated metal roof of the building. A pitched modern metal canopy with
awnings on both elevations supported on steel frame and
columns extends on Down and Up ends of the building. Internal: Internal access to the enclosed side wings was not possible, however they could be viewed from the windows and appear to have remained relatively intact. The central waiting room features painted brick walls, timber board ceiling lining and tile floor finish.
Signal box, 1942 External: A two-storey signal box accommodating the control room on the first floor level with staff amenities and the relay room on the ground floor. The timber framed walls are clad in flat asbestos cement sheets. The first floor roof, which is extended over the roof of the relay room together with the top roof are of flat membrane concealed behind wide moulded
fascias that project over wide
eaves. The control room has curved walls and aluminium curved windows at the western end. Ground floor doors and windows are timber framed. The box is situated at ground level a short distance from the western end of the station island platform. Designed by New South Wales Government Railways. Internal: The spaces are original but the electric control console and wall panel have been replaced in recent years by computerised console system placed behind a high bench. Access to the ground floor and relay room was not available. The curved observation windows of the control room have been covered by blinds from inside and metal sun control panel from outside as direct visual communication is no longer required.
Goods shed, External: A Subtype 2 rectangular face
brickwork goods shed with corrugated metal pitched roof. It is the only brick example of a Subtype 2 shed and remains relatively intact. The shed features simply detailed timber bargeboards at both
gable ends, semi-circular arched tall window openings (boarded externally) with cement rendered sills, flat cement rendered
lintels and timber thresholds to two-panel timberboard loading doors on both station side and street side elevations, and a single segmental arched door on the western side facing the bus interchange. Facades of the Goods Shed are emphasised by recessed
bays with dentilated tops around the arched windows. A brick platform with bullnosed capped brick
retaining walls along the edges and the sides of brick steps is located on the rail side of the Goods Shed. Internal: The Shed is essentially a large single space with exposed timber framed
truss roof underneath of the corrugated metal roofing visible and timberboard flooring. Configuration of the multi-paned steel windows with
fanlights and toughened glazing is evident from the interior. The brick walls are painted. Horizontal steel mechanisms for the sliding loading doors cross over the fanlights of the windows.
Platforms, 1888 & 1942–43 2 island platforms with concrete faces and decks topped with asphalt finish. Corrugated metal pitched canopies supported on a steel beam and column frames provide protection over both platforms with the canopy on Platform 3/4 extending around the existing 1888 Waiting Room roof and awning, which remain visible above the new canopy. Modern timber bench seating,
lighting, amenities, vending machines and aluminium palisade fencing are other features on the platforms. Platforms are accessible via
stairs and lift towers leading to the footbridge, where the 1995 overhead booking office and concourse are located. The 1995 corrugated metal canopy replaced the 1942 brick station building on Platform 1/2.
Footbridge, 1942 A modified standard footbridge with 1942 steel structural frame supported on steel columns. Sets of stairs to each street and platform provides access together with two modern lift towers at either end of the footbridge. Both sides of the footbridge, which accommodates the concourse and the overhead booking office, are enclosed by steel framed glass panels. The main space of the footbridge is covered by a corrugated metal
hipped roof punctuated by ventilation
gables and a central tower element creating a common architectural language with the motor towers of the station lifts.
Crane (1943) A type 1 jib crane that was manufactured by Frederick Gregory & Co and placed at St Marys on 24 August 1943. It is of five ton capacity with official number of "T 166". It is placed on an octagonal concrete
foundation and currently preserved as an industrial archaeological item within a brick dwarf wall and aluminium palisade fencing around its perimeter. A mature tree is also located within the protected space. It is one of approximately 8 jib cranes remaining in the Sydney area, other cranes also remain at Fairfield and Windsor.
Landscape features Other than a couple of trees within the forecourt of the Goods Shed there are no landscape features. These trees appear to date from the early 1990s.
Potential archaeological features There is no visible evidence of the 1942 brick station building that was removed from Platform 1/2 or other previous structures. St Marys Station has therefore low archaeological potential.
Condition • Station Buildings: Both of the station buildings are in good condition. • Signal Box: The building is generally in good condition with some rusting at the metal fascia of the
parapet and broken window glass (appears to be vandalised). • Goods Shed: The goods shed is vacant and is in relatively poor condition though structurally appears to be sound. Significant rising damp and salt problem is evident throughout the base of the walls both externally and internally, which requires immediate attention to halt further deterioration and prevent any structural damage. A number of timber floorboards are broken or missing. Internal wall painting finish is flaking. • Platforms: Both of the platforms are in good condition. • Footbridge: It is in good condition. • Crane: It is secured by metal fencing and is in good condition. St Marys Station Group is a relatively intact example of a station group. However, removal of the 1940s Platform 1/2 building and signal equipment of the signal box reduced its integrity. The station building is relatively intact both externally and internally and maintains its integrity. The goods shed has high integrity. The crane is intact. The footbridge has low integrity.
Modifications and dates • 1994–95major upgrading work to footbridge, including covering footbridge deck and stairs. • 1995overhead booking office designed by Spooner Harris & Associates – builder unknown – erected on 1943 steel beam sub-structure • 1995 – 1942station building on Platforms 1/2 (type 13, brick, standard roadside) has been demolished and replaced by a canopy • 2001original electric control console and wall panel of the Signal Box have been replaced, and additional platform canopies installed. ==Services==