Localities File:Upper Cambrian SPICE Map.png|alt=A map of SPICE localities during the upper Cambrian (500 Ma). Modified from the map published by Pulsipher et al., 2021.|thumb|500x500px|A map of SPICE localities during the upper Cambrian (500 Ma). Points on the map denote the locations of formations and the color indicates the paleo-water depth. Modified image is originally sourced from Pulsipher et al., 2021. All formations containing SPICE intervals formed between the paleolatitudes of 30°N and 60°S. For a full list of SPICE localities and formation see the following maps and table. { "type": "FeatureCollection", "features": [ { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ -56.118164, 48.661943 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ -63.984375, -34.016242 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 2.109375, 46.316584 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 67.148438, 48.04871 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 107.226563, 32.324276 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 127.96875, 37.230328 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 123.574219, 68.592487 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 14.414063, 57.704147 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 144.140625, -29.22889 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ -113.90625, 40.713956 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ -86.484375, 35.173808 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ 89.296875, 39.909736 ] } }, { "type": "Feature", "properties": {}, "geometry": { "type": "Point", "coordinates": [ -3.603516, 55.429013 ] } } ] }
Geology Formations containing SPICE excursions are highly variable with geologic characteristics varying greatly amongst localities. Stratigraphic thickness in particular has very large ranges between locations, with the smallest being the Wangliangyu section of China which is less than 3m. This thickness is in contrast to the Kulyumbe section of Siberia which is greater than 800m. This variability of stratigraphic thickness suggests that the regional
deposition rates during the 497 Ma to 494 Ma SPICE period were not globally uniform and more regionally dependent. Furthermore, formations containing the SPICE excursion represent a wide variety of lithologies, facies and water depths. In terms of lithology, all SPICE intervals are contained within carbonate units within carbonate and silicate sequences. The most common lithology for SPICE intervals are micritic
limestones, or carbonate
shales, generally interbedded with thin layers of calcareous
mudstone. SPICE intervals have also been observed in
dolostone units; however, these are not as common as the carbonate rocks. SPICE intervals are also highly variable when it comes to facies, with examples for shallow, intermediate and deep water settings (see map in the localities section). Considering the two most prominent areas of study, Laurentian formations (USA) tend to have stronger representation from shallow and intermediate facies (shallow/ near shore, shelf, intrashelf basin), while Gondwanan sections (China & Australia) have better representation of deep water facies (slope and basin), along with shallow and intermediate facies.
Stages of SPICE Defining standard δ13C values of the SPICE interval, it can be noted the magnitude is highly variable from location to location, with maximum excursion values ranging from 0.64 ‰ to 8.03 ‰. Regardless of values though, the SPICE interval can be identified based on a similar pattern observed in each sequence. This pattern is identified based on 6 distinct stages: pre-SPICE, early SPICE, rising SPICE, plateau, falling SPICE, and post SPICE (see figure for visual representation of each stage).
Stage 1: Pre-SPICE All areas of the section prior to the onset of the SPICE interval. δ13C values remain near 0 ‰, similar to modern marine dissolved inorganic carbon.
Stage 2: Early SPICE Onset of SPICE, characterized by a slow increase in δ13C from 0 to approximately 1 ‰, suggesting a gradual increase in organic carbon burial and decrease in oceanic 12C.
Stage 3: Rising SPICE Rapid increase in δ13C from the early SPICE value to the max value. This shift in value is generally between 3 ‰ and 6 ‰, suggesting a rapid increase in organic carbon burial. The onset of the rising SPICE also generally corresponds to fossil indicators for the 2nd stage of the end-Marjuman biomere extinction.
Stage 4: Plateau δ13C values fluctuate but remain near the maximum value for a period of time. This stage is not observed in all SPICE intervals. After reaching the maximum value, most intervals proceed immediately into stage 5, the falling SPICE.
Stage 5: Falling SPICE Rapid decrease from the maximum δ13C value to near the standard ocean water value (0 ‰). The rate of decrease in the falling SPICE is generally more rapid then the rate of increase in the Rising SPICE. Generally interpreted as ocean water returning to standard δ13C levels.
Stage 6: Post SPICE All areas of the section immediately following the termination of SPICE.
Factors affecting the magnitude of the δ13C anomaly Despite being a global event, the magnitude of δ13C values observed within a SPICE interval appear to be highly affected by a variety of local conditions. A few common trends that have been determined are as follows: • Higher paleolatitude formations (greater than 30°S) tend to have lower δ13C values throughout the sequence. • Shallower facies have lower values than deeper facies. • Limestone tends to have marginally higher δ13C than dolostone. == Proposed mechanism ==