}} The third generation appeared on 10 February 1973, this one was nicknamed the "
Gōriki (Herculean strength)" Sambar due to an advertising campaign at the time. The first series still carried a two-stroke two-cylinder 356 cc engine but by now water-cooled. Maximum power is at 5500 rpm. The engine code was EK34, the truck received the K71 model code while the van was called K81. As of February 1976, the engine was upgraded to the
EK21 four-stroke water-cooled version introduced in the
Rex to reduce emissions. Claimed maximum power remained the same, but at a much higher engine speed (7500 rpm) and with considerably lower torque figures than the earlier two-stroke type. This model saw the introduction of an electric window washer pump to improve driver visibility. Because of regulations changes, only three months later the engine was again upgraded with a 490 cc displacement (EK22) engine of a similar layout for the
Sambar 5 (K75 truck, K76 panel van, K85 van). This was naturally sold as the
Subaru 500 in export markets. This was in turn soon replaced by a full 550 cc (EK23) model, the K77/87 of March 1977. In export, the Sambar 550 was known as the
Subaru 600. This model saw the introduction of a sliding side door on both sides (although a version without the driver's side door remained available), with a full "B" pillar to enhance body stiffness instead of the approach used by the
Nissan Prairie which had the front and rear doors interlock. Minor horsepower improvements were introduced in 1977 along with an increase in the width of the vehicle. A
sunroof was added to the options list in 1979. 4WD was introduced as an option in 1980, on both the van and truck bodystyles, coinciding with the same feature being offered on the
Subaru Rex. 600van 1981.jpg|1981 Subaru 600 (export version) Abandoned Sanfu Sambar Front View 20150711b.jpg|Sanfu model in Taiwan ==Fourth generation (1982–1990)==