A
surgical fracture table is a table that is used for applying traction to broken limbs while the body is fixed in place, allowing the surgeon to reduce the broken extremity without requiring too much assistance, and then holding the limb in this fixed and reduced position while the surgeon applies
external fixation, such as a cast or splint, or
internal fixation, such as a nail or plate and screws, to maintain the reduction of the extremity. A surgical fracture table enables the patient to be placed in the following positions: ;
Supine position: The most common surgical position. The patient lies with back flat on operating room bed. ;
Jackknife position: Also called the Kraske position. Patient's abdomen lies flat on the bed. The bed is scissored so the hip is lifted and the legs and head are low. ;Knee-chest position: Similar to the jackknife except the legs are bent at the knee at a 90-degree angle. ;Lateral position: Also called the side-lying position, it is like the jackknife except the patient is on his or her side. Other similar positions are Lateral chest and Lateral kidney. ;
Lloyd-Davies position:It is a medical term referring to a common position for surgical procedures involving the pelvis and lower abdomen. The majority of colorectal and pelvic surgery is conducted with the patient in the Lloyd-Davis position. ;Kidney position: The kidney position is much like the lateral position except the patient's abdomen is placed over a lift in the operating table that bends the body to allow access to the
retroperitoneal space. A kidney rest is placed under the patient at the location of the lift. ;
Sims' position: The Sims' position is a variation of the left lateral position. The patient is usually awake and helps with the positioning. The patient will roll to his or her left side. Keeping the left leg straight, the patient will slide the left hip back and bend the right leg. This position allows access to the anus. == See also ==