MarketTitan Tornado
Company Profile

Titan Tornado

The Titan Tornado is large family of cantilever high-wing, pusher configuration, tricycle gear-equipped kit aircraft manufactured by Titan Aircraft of Austinburg, Ohio, for amateur construction.

Design and development
The first in the Tornado series, the Tornado 103, which started development in 1990, was introduced in 1994 and designed to fit into the US FAR 103 Ultralight Vehicles category, meeting the empty weight limit. If equipped with a light enough engine the Tornado 103 could qualify as a US ultralight. the Tornado's wing is stressed skin. The Tornado has a tricycle undercarriage with a supplemental tailwheel castor, as the aircraft sits on its tail when unoccupied. ==Operational history==
Operational history
The Tornado 103 was named Ultralight Grand Champion at Sun 'n Fun 1994. ==Variants==
Variants
;Tornado 103 :The first version, a single seater, intended for the US ultralight category with a wingspan. Standard engine was the Rotax 277. No longer in production. Reported construction time is 300 hours. Ten were reported flying in 1998. ;Tornado II :Two seats in tandem version, intended for the previous US ultralight trainer category and presently for the US homebuilt and light-sport categories. It has a wingspan. Standard engine is the Rotax 582 and cruise speed is with that engine. Acceptable power range is . The HKS 700E four-stroke engine has also been used. Still in production. Reported construction time is 350 hours. 120 were reported flying in 1998. ;Tornado II Trainer :Two seats in tandem version, intended for the previous US ultralight trainer category. It has a wingspan. Standard engine is the Rotax 582. Acceptable power range is . No longer in production. Reported construction time is 350 hours. 510 were reported flying in 2011. ;Tornado II Sport :Two seats in tandem version, intended for the US homebuilt category. It has a wingspan. Standard engine is the Rotax 912UL. Acceptable power range is . No longer in production. Reported construction time is 350 hours. 500 were reported flying in 2003. ;Tornado II 912 :Two seats in tandem version, intended for the US homebuilt category. It has a wingspan. Standard engine is the Rotax 912 and cruise speed is with that engine. Acceptable power range is . No longer in production. 145 were reported flying in 1999. ;Tornado II FP :Two seats in tandem amphibious floatplane version, intended for the US homebuilt category with a wingspan. Standard engine is the Rotax 618 and cruise speed is with that engine. Out of production. Reported construction time is 350 hours. Twelve were reported flying in 2001. ;Tornado MG II :Two seats in tandem version, with a wingspan. The wing is detachable for storage or transport. Standard engine is the Rotax 447 and the acceptable power range is . No longer in production. Reported construction time is 400 hours. Eight were reported flying in 2001. ;Tornado S :Two seats in tandem "stretched" fuselage version, intended for the US homebuilt and light-sport categories. It has a wingspan. Standard engine is the Rotax 912ULS and cruise speed is with that engine. Acceptable power range is and alternate engines include the Rotax 503, Rotax 582, Rotax 912UL, Jabiru 2200, or the Jabiru 3300. Still in production. Reported construction time is 300 hours. 55 reported flying in 2011. ;Tornado SS :Two seats in tandem "super stretched" fuselage version, intended for the US homebuilt and light-sport categories. It features a longer and higher cockpit area with more headroom that the Tornado II along with a bigger rear door and a full-sized back seat. It has a wingspan. Acceptable power range is and engines include the Rotax 912UL, Rotax 912ULS, Jabiru 2200, or the Jabiru 3300. Still in production. Twenty reported as flying in 2011. ==Specifications (Tornado 103) ==
tickerdossier.comtickerdossier.substack.com