Topological polymers

Topological polymers, or polymer topology, could refer to a single polymeric chain with topological information or a polymer network with special junctions or connections. When the topology of a polymeric chain or network is investigated, the exact chemical composition is usually neglected, but the way of junctions and connections is more considered. Various topological structures, on one hand, could potentially change the interactions (van der Waals interaction, hydrogen bonding, etc.) between each of the polymer chain. On the other hand, topology also determines the hierarchical structures within a polymer network, from a microscopic level (<1 nm) to a macroscopic level (10-100 nm), which eventually affords polymeric materials with completely different physical properties, glass transition temperature, gelation concentration. == Topological polymer classification ==

In early 1950s, Paul J. Flory was the pioneer who developed theories to explain topology within a polymer network, and the structure-property relationships between the topology and the mechanical property, like elasticity, was initially established afterwards. In early 2000s, Yasuyuki Tezuka and coworkers were the first ones that systematically described a single molecular chain with topological information. Adapted from Y. Tezuka and coworker's description of a topological polymer chain with more generalized rules, the topology notation rules are to be introduced first, followed by three classical classifications, including linear, branched and cyclic polymer topologies, and they are classified in a table reorganized and redrawn from Y. Tezuka and coworker (Copyright, 2001 by American Chemical Society). A general polymer chain could be generalized into an undirected graph with nodes (vertices or points) and edges (lines or links) based on graph theory. In a graph theory topology, two sets of nodes are present, termini and junctions. The quantity ‘degree’ represents the number of edges linked to each node, if the degree of a certain node is larger than 3 (including 3), the node is a junction, while the degree of a node is 1, the node is a terminus. There are no nodes with a degree of 2 since they could be generalized into their adjacent nodes. As for a certain polymer, as long as the topology is fixed, a specific topology notation could be generated using the following rules: A general polymer chain notation could be expressed as: P_m(x,y)[s_1(s_{11},s_{12},..),s_2(s_{21},s_{22},...),...] • Capitalized letter P represents the main topology within a polymer, A represents linear or branched topology, and Roman numerals are used to represent the number of rings in the polymer chain, I represents one cycle, II represents two cycles, III, IV, V, etc. represents three, four, five cycles and so on. • m represents the number of nodes in the graph theory topology, x represents the number of termini and y represents the number of junctions, and m=x+y is always true. • If P_m(x,y) could represent an exclusive topology, there is no need to add more information to specify the notation. However, if multiple possibilities are present, extra information is needed. i. For branched topology, a main chain is first selected, and the degree of each junction nodes along the chain should be noted as s_i connected by a hyphen. If there is a side chain on any of the main chain node, s_{ij} should be noted with a bracket following the main chain notation. ii. For monocyclic topology, the outward branch should be firstly identified with the number of branches at each of the junctions as s_i connected by a hyphen. Then the topology of each branch should be identified using the rule in i as s_{ij} using a bracket following the s_i notations. iii. For multicyclic topology, superscript letter (a, b, c and so on) is used to describe internal connections within an existing ring. Linear Linear topology is a special topological structure that exclusively has two nodes as the termini without any junction nodes. High-density polyethylene (HDPE) could be regarded as a linear polymer chain with very small amount of branching, the linear topology has been listed below: Linear chains capable of forming intra-chain interactions can fold into a wide range of circuit topologies. Examples include biopolymers such as proteins and nucleic acids. Branched When side chains are introduced into a linear polymer chain, a branched topology forms. Linear polymers are special types of branched polymers with zero junction nodes, but they are cataloged into two classifications to distinguish their special macroscopic properties. Branched polymers with the same molecular weight usually demonstrate different physical properties due to that branching could generally decrease the van der Waals interactions between each of the polymer chain. Several well-known branched polymers have been synthesized, such as star-shape polymer, comb polymer and dendrimer. Selected branched topologies have been listed below: Cyclic Cyclic structures are of interest topologically because there are no termini in this topology and the physical property could be dramatically different as a result of the restriction of the termini. Monocyclic Monocyclic topology is a topological structure with only one cycle in the polymer chain, and it could be coupled with outward branching structures. Selected monocyclic topologies have been listed below: Bicyclic Bicyclic topology refers to a structure that two cycles connected internally or externally are present in a polymer chain. Selected bicyclic topologies are listed below: Polycyclic Similar to monocyclic and bicyclic topologies, polycyclic topologies possess more cycles in a polymer chain and are more synthetically challenging. Selected polycyclic (tricyclic) topologies are listed below: == Polymer network topology ==

Unlike single chain polymeric species, polymer network topology is more complicated as a result of the amorphous feature so that a simple notation is usually not feasible. To analyze the topology of a network, the crosslinkers, including the branched crosslinker and cyclic crosslinker, are considered. and network disassembly spectrometry (NDS) techniques provides quantitative characterizations of loops or cycles in a polymer network. == Topological polymer/network synthesis ==

Topological polymer single chain The synthesis of branched polymers (grafted polymer, comb polymer, star-shape polymer and dendrimer) has been well developed using well-known polymerization methodology such as cationic/anionic polymerization. Unlike branched polymer chain synthesis, the synthesis of cyclic polymer is more challenging. General cyclic species involve the combination between two fragments or among several fragments. Electrostatic self-assembly and covalent fixation is one of the most effective strategies to synthesize cyclic topological polymer. The reaction is driven by the electrostatic interactions between telechelic polytetrahydrofurans with cyclic ammonium salt and pluricaboxylate counterions. Upon dilution, the anions and cations could self-assemble into a cyclic structure, followed by a covalent fixation by heat or other external stimuli to undergo ring-opening reaction and close the chain into a cycle. • The introduction of crosslinkers that possess topological merits, such as polyrotaxane, polycatenane, daisy chain and so on. == Examples ==

The topology of a polymer chain or a polymer network is crucial in determining the macroscopic properties of a polymeric material, especially mechanical properties like elasticity and physical properties involving phase transitions. To date, several polymers with topological interest have been developed, which have been used for many applications, such as mechanical elastomer, energy, and so on. Below are some of the representative topological polymers or polymer networks. Interpenetrating polymer Interpenetration polymers are polymer networks involving two and more polymer strands which are spatially intertwining with each other to form unique spatial topologies. Dendrimer Dendrimer is a special branched polymers with a larger fraction of terminal nodes compared to the junction nodes and could be used for applications in drug delivery or catalysis. Polyrotaxane Polyrotaxane is a polymer chain or a polymer network with mechanical interlock structures between ring-like molecules and polymer chain, where both the rings and the linear polymer chain could serve as the crosslinker to form a polymer network. == References ==