Unit record equipment

Beginnings In the 1880s Herman Hollerith was the first to record data on a medium that could then be read by a machine. Prior uses of machine readable media had been for lists of instructions (not data) to drive programmed machines such as Jacquard looms and mechanized musical instruments. "After some initial trials with paper tape, he settled on punched cards [...]". To process these punched cards, sometimes referred to as "Hollerith cards", he invented the keypunch, sorter, and tabulator unit record machines. These inventions were the foundation of the data processing industry. The tabulator used electromechanical relays to increment mechanical counters. Hollerith's method was used in the 1890 census. The company he founded in 1896, the Tabulating Machine Company (TMC), was one of four companies that in 1911 were amalgamated in the forming of a fifth company, the Computing-Tabulating-Recording Company, later renamed IBM. Following the 1900 census a permanent Census bureau was formed. The bureau's contract disputes with Hollerith led to the formation of the Census Machine Shop where James Powers and others developed new machines for part of the 1910 census processing. Powers left the Census Bureau in 1911, with rights to patents for the machines he developed, and formed the Powers Accounting Machine Company. In 1927 Powers' company was acquired by Remington Rand. In 1919 Fredrik Rosing Bull, after examining Hollerith's machines, began developing unit record machines for his employer. Bull's patents were sold in 1931, constituting the basis for Groupe Bull. These companies, and others, manufactured, and marketed a variety of general-purpose unit record machines for creating, sorting, and tabulating punched cards, even after the development of computers in the 1950s. Punched card technology had quickly developed into a powerful tool for business data-processing. Timeline • 1884: Herman Hollerith files a patent application titled "Art of Compiling Statistics"; granted on January 8, 1889. • 1886: First use of tabulating machine in Baltimore's Department of Health. • 1889: First recorded use of integrating tabulator in the Office of the Surgeon General of the Army. • 1904: Porter, having returned to England, forms The Tabulator Limited (UK) to market Hollerith's machines. • 1905: Hollerith reincorporates the Tabulating Machine Company as The Tabulating Machine Company • 1906: Hollerith Type 1 Tabulator, the first tabulator with an automatic card feed and control panel. • 1909: The Tabulator Limited renamed as British Tabulating Machine Company (BTM). • 1910: Tabulators built by the Census Machine Shop print results. • 1910: Willy Heidinger, an acquaintance of Hollerith, licenses Hollerith's The Tabulating Machine Company patents, creating Dehomag in Germany. • 1911: Computing-Tabulating-Recording Company (CTR), a holding company, formed by the amalgamation of The Tabulating Machine Company and three other companies. • 1911: James Powers forms Powers Tabulating Machine Company, later renamed Powers Accounting Machine Company. Powers had been employed by the Census Bureau to work on tabulating machine development and was given the right to patent his inventions there. The machines he developed sensed card punches mechanically, as opposed to Hollerith's electric sensing. • 1912: The first Powers horizontal sorting machine. • 1914: Thomas J. Watson hired by CTR. • 1914: The Tabulating Machine Company produces 2 million punched cards per day. • 1914: The first Powers printing tabulator. • 1915 Powers Tabulating Machine Company establishes European operations through the Accounting and Tabulating Machine Company of Great Britain Limited. • 1919: Fredrik Rosing Bull, after studying Hollerith's machines, constructs a prototype 'ordering, recording and adding machine' (tabulator) of his own design. About a dozen machines were produced during the following several years for his employer. • 1920: BTM begins manufacturing its own machines, rather than simply marketing Hollerith equipment. • 1920: The Tabulating Machine Company's first printing tabulator, the Hollerith Type 3. • 1921: Powers-Samas develops the first commercial alphabetic punched card representation. • 1922: Powers develops an alphabetic printer. • 1924: Computing-Tabulating-Recording Company (CTR) renamed International Business Machines (IBM). There would be no IBM-labeled products until 1933. • 1925: The Tabulating Machine Company's first horizontal card sorter, the Hollerith Type 80, processes 400 cards/min. • 1927: Remington Typewriter Company and Rand Kardex combine to form Remington Rand. Within a year, Remington Rand acquires the Powers Accounting Machine Company. The Tabulating Machine Company begins its collaboration with Benjamin Wood, Wallace John Eckert, and the Statistical Bureau at Columbia University. • 1929 The Accounting and Tabulating Machine Company of Great Britain Limited renamed Powers-Samas Accounting Machine Limited (Samas, full name Societe Anonyme des Machines a Statistiques, had been the Power's sales agency in France, formed in 1922). The informal reference "Acc and Tab" would persist. The Tabulator model T30 is introduced. • 1931: The Tabulating Machine Company's first punched card machine that could multiply, the 600 Multiplying Punch. Their first alphabetical accounting machine - although not a complete alphabet, the Alphabetic Tabulator Model B was quickly followed by the full alphabet ATC. The Packard attracted users from across the country: "the Carnegie Foundation, Yale, Pittsburgh, Chicago, Ohio State, Harvard, California, and Princeton." • 1933: Compagnie des Machines Bull is the new name of the reorganized H.W. Egli - Bull. • 1933: The Tabulating Machine Company name disappears as subsidiary companies are merged into IBM. The Hollerith trade name is replaced by IBM. IBM introduces removable control panels. • 1934: IBM renames its Tabulators as Electric Accounting Machines. • 1937: The first collator, the IBM 077 Collator The first use of an electronic component in an IBM product was a photocell in a Social Security bill-feed machine. • 1938: Powers-Samas multiplying punch introduced. • 1943: "IBM had about 10,000 tabulators on rental [...] 601 multipliers numbered about 2000 [...] keypunch[es] 24,500". The IBM 603 Electronic Multiplier was introduced, "the first electronic calculator ever placed into production.". • 1948: The IBM 604 Electronic Punch. "No other calculator of comparable size or cost could match its capability". • 1952: Bull Gamma 3 introduced. An electronic calculator with delay-line memory, programmed by a connection panel, that was connected to a tabulator or card reader-punch. The Gamma 3 had greater capacity, greater speed, and lower rentals than competitive products. in 1964 By the 1950s punched cards and unit record machines had become ubiquitous in academia, industry, and government. The warning often printed on cards that were to be individually handled, "Do not fold, spindle or mutilate", coined by Charles A. Philips, became a motto for the post-World War II era (even though many people had no idea what spindle meant). With the development of computers punched cards found new uses as their principal input media. Punched cards were used not only for data, but for a new application - computer programs, see: Computer programming in the punched card era. Unit record machines therefore remained in computer installations in a supporting role for keypunching, reproducing card decks, and printing. • 1955: IBM produces 72.5 million punched cards per day. • 1958: The "Series 50", basic accounting machines, was announced. These were modified machines, with reduced speed and/or function, offered for rental at reduced rates. The name "Series 50" relates to a similar marketing effort, the "Model 50", seen in the IBM 1940 product booklet. An alternate report identifies the modified machines as "Type 5050" introduced in 1959 and notes that Remington-Rand introduced similar products. • 1959: BTM merges with rival Powers-Samas to form International Computers and Tabulators (ICT). • 1959: The IBM 1401, internally known in IBM for a time as "SPACE" ("Stored Program Accounting and Calculating Equipment") and developed in part as a response to the Bull Gamma 3, outperforms three IBM 407s and a 604, while having a much lower rental. • 1960: The IBM 609 Calculator, an improved 608 with core memory. This will be IBMs last punched card calculator. Many organizations were loath to alter systems that were working, so production unit record installations remained in operation long after computers offered faster and more cost-effective solutions. Cost or availability of equipment was another factor; for example in 1965 an IBM 1620 computer did not have a printer as standard equipment, so it was normal in such installations to punch output onto cards and then print these cards using an IBM 407 accounting machine. Specialized uses of punched cards such as toll collection, microform aperture cards, and punched card voting kept unit record equipment in use into the twenty-first century. • 1968: International Computers and Tabulators (ICT) merges with English Electric Computers, forming International Computers Limited (ICL). • 1969: The IBM System/3, renting for less than $1,000 a month, the ancestor of IBM's midrange computer product line, aka. minicomputers, was aimed at new customers and organizations that still used IBM 1400 series computers or unit record equipment. It featured a new, smaller punched card with a 96-column format. Instead of the rectangular punches in the classic IBM card, the new cards had tiny (1 mm), circular holes much like paper tape. By July 1974 more than 25,000 System/3s had been installed. • 1971: The IBM 129 Card Data Recorder (keypunch and auxiliary on-line card reader/punch) is the last, or among the last, 80-column card unit record product announcements (other than card readers and card punches attached to computers). • 1975 Cardamation founded, a U.S. company that supplied punched card equipment and supplies until 2011. Endings • 1976: The IBM 407 Accounting Machine was withdrawn from marketing. • 1978: IBM's Rochester plant made its last shipment of the IBM 082, 084, 085, 087, 514, and 548 machines. The System/3 was succeeded by the System/38. • 1984: The IBM 029 Card Punch, announced in 1964, was withdrawn from marketing. IBM closed its last punch card manufacturing plant. • 2010: A group from the Computer History Museum reported that an IBM 402 Accounting Machine and related punched card equipment was still in operation at a filter manufacturing company in Conroe, Texas. The punched card system was still in use as of 2013. • 2011: The owner of Cardamation, Robert G. Swartz, dies, and the company, perhaps the last supplier of punch card equipment, ceases operation. • 2015: Punched cards for time clocks and some other applications were still available; one supplier was the California Tab Card Company. As of 2018, the web site was no longer in service. ==Punched cards==

The basic unit of data storage was the punched card. The IBM 80-column card was introduced in 1928. The Remington Rand Card with 45 columns in each of two tiers, thus 90 columns, in 1930. Powers-Samas punched cards include one with 130 columns. Columns on different punch cards vary from 5 to 12 punch positions. The method used to store data on punched cards is vendor-specific. In general, each column represents a single digit, letter, or special character. Sequential card columns allocated for a specific use, such as names, addresses, multi-digit numbers, etc., are known as a field. An employee number might occupy 5 columns; hourly pay rate, 3 columns; hours worked in a given week, 2 columns; department number 3 columns; project charge code 6 columns; and so on. ==Keypunching==

Original data were usually punched into cards by workers, often women, known as keypunch operators, under the control of a program card (called a drum card because it was installed on a rotating drum in the machine), which could automatically skip or duplicate predefined card columns, enforce numeric-only entry, and, later, right-justify a number entered. Their work was often checked by a second operator using a verifier machine, also under the control of a drum card. The verifier operator re-keyed the source data and the machine compared what was keyed to what had been punched on the original card. ==Sorting==

An activity in many unit record shops was sorting card decks into the order necessary for the next processing step. Sorters, like the IBM 80 series Card Sorters, sorted input cards into one of 13 pockets depending on the holes punched in a selected column and the sorter's settings. The 13th pocket was for blanks and rejects. Cards were sorted on one card column at a time; sorting on, for example, a five digit zip code required that the card deck be processed five times. Sorting an input card deck into ascending sequence on a multiple column field, such as an employee number, was done by a radix sort, bucket sort, or a combination of the two methods. Sorters were also used to separate decks of interspersed master and detail cards, either by a significant hole punch or by the cards corner-cut. More advanced functionality was available in the IBM 101 Electronic Statistical Machine, which could • Sort • Count • Accumulate totals • Print summaries • Send calculated results (counts and totals) to an attached IBM 524 Duplicating Summary Punch.{{cite book |title=IBM 101 Electronic Statistical Machine - Reference Manual ==Tabulating==

at US Army's Redstone Arsenal in 1961 Reports and summary data were generated by accounting or tabulating machines. The original tabulators only counted the presence of a hole at a location on a card. Simple logic, like AND and OR, could be done using relays. Later tabulators, such as those in IBM's 300 series, directed by a control panel, could print each card on its own line and do both addition and subtraction of selected fields to one or more accumulator registers. At some signal, say a following card with a different customer number, it could print totals for the just completed customer number. Tabulators became complex: the IBM 405 contained 55,000 parts (2,400 different) and 75 miles of wire; a Remington Rand machine circa 1941 contained 40,000 parts. ==Calculating==

In 1931, IBM introduced the model 600 multiplying punch. The ability to divide became commercially available after World War II. The earliest of these calculating punches were electromechanical. Later models employed vacuum-tube logic. Electronic modules developed for these units were used in early computers, such as the IBM 650. The Bull Gamma 3 calculator could be attached to tabulating machines, unlike the stand-alone IBM calculators. ==Card punching==

Card punching operations included: • Summary punching - punching new cards with details and totals from an attached tabulating machine. • Reproducing - reproducing a card deck in its entirety or just selected fields. A payroll master card deck might be reproduced at the end of a pay period with the hours worked and net pay fields blank and ready for the next pay period's data. Programs in the form of card decks were reproduced for backup. • Mark sense reading - detecting electrographic lead pencil marks on ovals printed on the card and punching the corresponding data values into the card. • Gang punching - producing a large number of identically punched cards—for example, for inventory tickets. Singularly or in combination, these operations were provided in a variety of machines. The IBM 519 Document-Originating Machine could perform all of the above operations. The IBM 549 Ticket Converter read data from Kimball tags, copying that data to punched cards. With the development of computers, punched cards were also produced by computer output devices. == Collating==

IBM collators had two input hoppers and four output pockets. These machines could merge or match card decks based on the control panel's wiring as illustrated here. The Remington Rand Interfiling Reproducing Punch Type 310-1 was designed to merge two separate files into a single file. It could also punch additional information into those cards and select desired cards. Collators performed operations comparable to a database join. == Interpreting==

An interpreter prints characters on a punched card equivalent to the values of all or selected columns. The columns to be printed can be selected and even reordered, based on the machine's control panel wiring. Later models could print on one of several rows on the card. Unlike keypunches, which print values directly above each column, interpreters generally use a font that was a little wider than a column and can only print up to 60 characters per row. Typical models include the IBM 550 Numeric Interpreter, the IBM 557 Alphabetic Interpreter, and the Remington Rand Type 312 Alphabetic Interpreter. ==Filing==

Batches of punched cards were often stored in tub files, where individual cards could be pulled to meet the requirements of a particular application. ==Transmission of punched card data==

Electrical transmission of punched card data was invented in the early 1930s. The device was called an Electrical Remote Control of Office Machines and was assigned to IBM. Inventors were Joseph C. Bolt of Boston & Curt I. Johnson; Worcester, Mass. assors to the Tabulating Machine Co., Endicott, NY. The Distance Control Device received a US patent in August 9, 1932: . Letters from IBM talk about filling in Canada in 9/15/1931. ==Processing punched tape==

The IBM 046 Tape-to-Card Punch and the IBM 047 Tape-to-Card Printing Punch (which was almost identical, but with the addition of a printing mechanism) read data from punched paper tape and punched that data into cards. The IBM 063 Card-Controlled Tape Punch read punched cards, punching that data into paper tape. ==Control panel wiring and Connection boxes==

The operation of Hollerith/BTM/IBM/Bull tabulators and many other types of unit record equipment was directed by a control panel. Operation of Powers-Samas/Remington Rand unit record equipment was directed by a connection box. Control panels had a rectangular array of holes called hubs which were organized into groups. Wires with metal ferrules at each end were placed in the hubs to make connections. The output from some card column positions might connected to a tabulating machine's counter, for example. A shop would typically have separate control panels for each task a machine was used for. ==Paper handling equipment==

For many applications, the volume of fan-fold paper produced by tabulators required other machines, not considered to be unit record machines, to ease paper handling. • A decollator separated multi-part fan-fold paper into individual stacks of one-part fan-fold and removed the carbon paper. • A burster separated one-part fan-fold paper into individual sheets. For some uses it was desirable to remove the tractor-feed holes on either side of the fan-fold paper. In these cases the form's edge strips were perforated and the burster removed them as well. ==See also==