USS Voyager (Star Trek)

Rick Sternbach, who designed the Borg cube for The Next Generation, and Richard James collaborated over several months to design the USS Voyager. Sternbach started work on the new design in the fall of 1993 when the new series was announced. By the spring of 1994, the design had started to mature, and was smaller than The Next Generation Enterprise-D with features like the ability to land on a planet's surface. The interior design focused on the bridge, which set the tone for the rest of ship. Throughout the design process, the main goal was to make it new and appealing while still holding in part to the same familiar design. Voyager special effect shots were done with both miniatures and CGI. The miniature shots of the Voyager model were used as a benchmark to improve the CGI shots. Two different computer models were developed from the physical model by two different companies that scanned it, Amblin Imaging and Foundation Imaging. Amblin won an Emmy for Voyager opening CGI title visuals featuring USS Voyager passing through space, but the weekly episode exteriors were captured with hand-built miniatures of Voyager. By late 1996 (midway through season three), certain exterior shots were fully CGI. Another challenge of the design was coordinating the interior set design with exterior shots, in particular the location of key rooms and the design of windows. These were important, for example, in shots that crossed over from outside the spacecraft to inside the spacecraft in one filming shot. Mission Voyager was launched in 2371. The crew's first mission was to track down a Maquis ship in the Badlands. An alien force called the Caretaker transported both Voyager and the Maquis vessel across 70,000 light-years to the Delta Quadrant, damaging Voyager and killing several crewmembers including the medical staff, helm officer, first officer and the chief engineer. Voyager and the Maquis ship are ultimately stranded in the Delta Quadrant to prevent a genocide of the Ocampans, a species on a nearby planet under the Caretaker's protection from the Kazon, an antagonistic race native to the Delta Quadrant who seek the resources of the Ocampa. Captain Janeway orders the destruction of the device that could transport Voyager and the Maquis vessel home, thereby protecting the Ocampa. Stranded, and with the Maquis ship also destroyed, both crews integrate and work together for the anticipated 75-year journey home. The intended crew complement was 141 Starfleet personnel, This figure fluctuated during its time in the Delta Quadrant, gaining or losing count due to mishaps, adopted crew, births, and voluntary departures; they start the second year of their journey with 152 people on board, at one point during the fifth year of its journey, there were 150 people on board. Starfleet Command eventually becomes aware of the ship's presence in the Delta Quadrant and is later able to establish regular communication. After a seven-year journey, during which the acquisition of new technologies and assistance from various allies had already enabled the ship to travel a distance that otherwise would have taken over thirty years, the ship returned to the Alpha Quadrant via a Borg transwarp conduit. In the Star Trek: Lower Decks season 4 premiere "Twovix", Voyager is being converted into a museum when a dormant macrovirus wreaks havoc on the ship. After the incident is concluded, Voyager is retired to a museum with the episode's events being added to its exhibits. In Star Trek: Prodigy season 2, Voyager is replaced by the USS Voyager-A which is described by the Doctor as being a Lamarr-class science vessel retrofitted with technologies that Voyager brought back from the Delta Quadrant. The new ship is commanded by now-Vice Admiral Janeway on its maiden voyage. There are several references made to the original Voyager with Janeway having a model of the ship in her ready room. During this time, Janeway also celebrates the 14th anniversary of her command of Voyager which was Janeway's first command. Voyager is seen briefly in the Star Trek: Picard third-season episode "The Bounty", now decommissioned and part of Starfleet's Fleet Museum. Design and capabilities The 15-deck (257 rooms), Voyager was built at the Utopia Planitia Fleet Yards and launched from Earth Station McKinley. Voyager was equipped with 47 bio-neural gel packs and two holodecks. It was equipped with a class-9 warp drive, allowing for a maximum sustainable speed of Warp 9.975. The ship was initially equipped with 40 photon torpedoes with type VI warheads, two of which were equipped with tricobalt devices. Both tricobalt devices were used to destroy the Caretaker's array. In the final episode, an alternate future Kathryn Janeway equipped the ship with transphasic torpedoes and ablative hull armor. Cargo bay 2 is equipped with several Borg alcoves when Captain Janeway forms an alliance with the Borg and several Borg are forced to work aboard Voyager during the alliance. Seven of Nine and Harry Kim construct an astrometrics lab from scratch with Borg-enhanced sensors, knowledge of which Seven of Nine retained from the Borg. ==Shuttlecraft==

An important shuttlecraft in many episodes, and operated from the USS Voyager, was a spacecraft called the Delta Flyer. The Delta Flyer was introduced in the Season 5 episode "Extreme Risk", and was designed and constructed by the crew in the context of the show. The Delta Flyer was designed by illustrator Rich Sternbach, and exterior views were rendered by computer graphics by Foundation Imaging. One of Voyagers shuttles, the Aeroshuttle, was integrated with the hull in the saucer section and although it was never used in an episode, the production team did develop special effects test footage of it disembarking. Voyager Aeroshuttle was intended as a warp-capable vessel that could also fly in atmospheres; the footage was made by CGI team leaders Rob Bonchune and Adam Lebowitz, along with the VFX producer Dan Curry. Two other craft, the Manta and Cochrane were also developed but the Manta was not used. Cochrane was used in "Threshold" for the purpose of reaching warp 10. ==Presentations==

In addition to its namesake television show, the spacecraft appeared in the computer game Star Trek: Voyager Elite Force (2000). In computer gaming The Voyager design appeared in Star Trek: Voyager which originally aired on UPN network from 1995 to 2001, but was also used in a number of computer and video games in that period in various capacities. One was Star Trek: Voyager – Elite Force which came out in 2000. This was a computer game style known as a first-person shooter and received a positive reception by the gaming community at that time. Voyager Elite Force was ranked second out of ten of the best Star Trek games up to 2015. Its sequel was published in 2003. One game based on the show, Voyager (circa 1995), was cancelled but has been an influence on other games since. Merchandise The model-making company Revell released a plastic model of USS Voyager. Another pre-built offering was made of metal, and a reviewer praised the "swooshy" 'arrowhead' style of the design. ==Production==

In late October 1994, the USS Voyager model was delivered to Image G, who did the motion control photography video work with the model for the special effects shots for the upcoming launch of the Star Trek: Voyager television show. Image G also did the motion control photography for the Caretaker Array, as well as for the Maquis and Kazon vessels. One of the more complex sets for the spacecraft was the bridge of Voyager. The bridge of Voyager had 11 different monitors of three different sizes, that had custom graphics displayed depending on what was being shot for each scene. The ship's design and sets were also used in the Star Trek: Deep Space Nine episode "Inter Arma Enim Silent Leges", this time as the Intrepid Class USS Bellerophon. ==See also==