In the United States, Victor airways are designated by the
FAA in FAA Order JO 7400.11. They are available for flight up to, but not including, 18,000ft MSL (
above mean sea level) under either
instrument flight rules (IFR) or
visual flight rules (VFR). Victor airways have minimum (and possibly maximum) altitudes for IFR operations established. For VFR operations, victor airways are just a subset of so-called
Federal airways (which also include so-called
colored airways), which are designated as
Class E, and hence are extended from
above ground level (AGL) up to, but not including,
above mean sea level (AMSL). Victor airways are depicted as black solid lines on IFR Low-Altitude Enroute charts and as thick faded blue lines on VFR Terminal and
Sectional Area charts. They are identified by a number, similar to an interstate highway (for example, a pilot could say that he/she is "flying Victor Eight"). The width of the victor corridor depends on the distance from the
navigational aids (such as VORs): • When VORs are less than 102
nautical miles (NM) (189 km) from each other, the airway extends 4 NM (7.4 km) on either side of the centerline (8 NM (14.8 km) total width). • When VORs are more than 102 NM from each other, the width of the airway in the middle increases to account for the increased margin of error in the VOR signal. The width of the airway beyond 51 NM from a navaid is 4.5
degrees on either side of the centerline (at 51 NM from a navaid, 4.5 degrees from the centerline of a radial is equivalent to 4 NM). The maximum width of the airway is at a designated changeover point between the two navaids, usually half way. == Canada ==