W. A. C. Bennett and high modernism W. A. C. Bennett was the
Premier of British Columbia from 1952 to 1972. Bennett was committed to the large-scale, state-directed development of British Columbia and promoted the continued development of
natural resources. Large hydroelectric projects, such as the W. A. C. Bennett Dam, were part of the resource development for which Bennett was advocating. In his opinion, harnessing nature would make British Columbia wealthy and support the emergence of an industrial economy as well as a society that was, "connected, institutionally anchored, urban, wealthy, and domestic.". Bennett's convictions, and therefore the policies of his government, concerning hydroelectric development have been regarded as a manifestation of the ideology high modernity, also known as
high modernism. Along with the benefits that high modernist development could bring, there were also consequences. High modernism, along with the administrative ordering of nature and society, authoritarian state, and a "prostrate civil society which would be unable to resist high modernist plans", can be a recipe for disaster. It is debatable whether or not all of these elements were present in British Columbia at the time, but regardless, the development of the Peace River led to environmental changes that caused a minority of people to live in isolation, dependence, alienation, and illness. On the other hand, the hydroelectric projects realized by Bennett's Two Rivers policy created a large supply of less expensive energy in British Columbia, which provided industrial growth and therefore employment.
Two Rivers policy W. A. C. Bennett's Two Rivers policy aimed to develop the hydroelectric potential of both the Peace and
Columbia Rivers simultaneously. The policy stemmed from Bennett's desire to wrest control of resources away from the federal government in regards to power development in the province. Bennett and the American company
Kaiser Aluminum and Chemical Corporation of the United States had agreed that in return for a fifty-year water license, the Kaiser Corporation would construct a large dam on the upper Columbia River. Not only would they pay for the construction, they would also return 20% of the electricity generated to British Columbia and pay the provincial taxes as well as water license fees. Much to Bennett's dismay, the federal government of Canada dissolved the deal by asserting its right of control over international waterways and took over negotiations with the United States. It would appear that British Columbia was not to be allowed to sell electricity to America for provincial profit. In response, Bennett turned his attention towards developing the Peace River's hydroelectric potential at the previously identified site of Portage Mountain by constructing a massive storage dam that would later be named the W. A. C. Bennett dam. Bennett hoped that the economic independence British Columbia would gain by developing the Peace River would provide the leverage necessary for the federal government of Canada to allow British Columbia to sell electricity that could be created by damming the Columbia River to the Americans. This 'Two Rivers' policy faced opposition from people who thought that if the Columbia were developed, the electricity generated should be for Canada's sole use as opposed to America's. The Two Rivers policy led to the development of the WAC Bennett Dam on the Peace River and the
Keenleyside Dam and
Mica Dam on the Columbia River together with
Duncan Dam at the top of Kootenay Lake. In 1964 the policy was formally realized with ratification of the
Columbia River Treaty by the Government of Canada and the United States of America. Because of his Two Rivers policy, Bennett was successful in pressuring the federal government of Canada to allow British Columbia to 'sell electricity' to the Americans for a thirty-year period for the
lump sum of US$275 million. The nationalization of
BC Electric (1961), which was rolled over into the BC Power Commission to form
BC Hydro, can also be seen as a part of this strategy.
Site selection Ray Williston, the minister of land and forests for the provincial government at the time, proposed turning sections of the Peace and Columbia River basins known as the
Rocky Mountain Trench into a source of power generation. The "Power Trench", as it was known, would provide not only electricity, but give the ability to control water flow for flood prevention and agricultural purposes in the U.S. and Canada. In 1957 twelve locations along the Peace River were identified by the
Wenner-Gren British Columbia Development Company as potential sites to build a dam. One of the sites, located 22 kilometres from
Hudson's Hope, was judged to be the best location due to its geography.
Gordon Shrum, a physics professor at the
University of British Columbia, was chosen to conduct a study on the cost effectiveness of developing dams on the Peace and Columbia rivers. The study led to the conclusion that it would be cheaper to build on the Peace River, but only if a public company was used due to lower interest rates available to crown corporations.
Construction When plans for construction were given the green light on the W. A. C. Bennett Dam (known as the Portage Mountain Dam during construction), clearing the soon to be reservoir was the first step in the process. It was a massive undertaking which was completed on the shoestring budget of five million dollars by the Forest Service Branch. When the water rose, hundreds of thousands of acres of cut trees floated on the lake surface The initial stages of construction required building a
coffer dam, preparing the foundations and injecting grout into the ground to create a watertight seal, building a drainage system, and excavating to create a solid base for building. Over the course of construction, of rock and dirt were taken from the nearby glacial moraine by conveyor belt to create the dam relying primarily on gravity to hold it together. Upon completion, the W. A. C. Bennett Dam became one of the biggest
earth-filled dams in the world stretching 183 metres tall, 800 metres wide, by two kilometres long (). When finished, the dam incorporated one of the largest hydroelectric generating stations. Components are located as far as below ground and includes 10 generating units located deep underground in the powerhouse. The Main powerhouse structure is named the G.M. Shrum generating station. It was designed to resemble a giant transformer to reflect its function and modern design of the 1960s. The project was widely seen as a success, especially considering its remote location far from civilization. The construction project was managed by
Gordon Shrum, the appointed head of the newly created
BC Hydro crown corporation. The provincial government had specifically created BC Hydro as a way of financing the project through lower interest rates available to crown corporations and to control the development of provincial energy resources. When Shrum took over the project in 1961 it was already a year behind schedule meeting the 1968 deadline to generate power. Through a 'hands on', 'cost conscious' and a 'design as you go' strategy, the project was officially completed in the fall of 1967 with the first generators going online in 1968. The project was completed on time and on budget; however, additional construction would continue through the 1970s with final completion in 1980 when the last generator was installed. The construction of the W. A. C. Bennett Dam involved over twenty unions that were bound by ten-year contracts guaranteeing BC Hydro no
lockouts or
strike action. This contract allowed the project to be built without labour delays. The men involved on the project were international, coming from around North America, Europe, and as far as Japan. The workers onsite lived in temporary camps built around the Portage Mountain site with more workers in the summer and fewer in the winter. Much of the construction occurred inside the dam which was claustrophobic, full of exhaust fumes, and occasionally subject to cave-ins. In total, 16 men have lost their lives working on the dam. During the construction process, the Portage Mountain lookout was one of the first buildings built so that tourists could view the progress on the dam.
Upgrading and refurbishment From 2009 to 2012, units 6 to 8 were refurbished to increase the plant capacity by 90 megawatts. The last unit of them, unit 7, was put into service on November 29, 2012. Units 1 to 5 have undergone complete refurbishment and upgrades, increasing the reliability and capacity of the first units installed at G.M. Shrum. The upgrades increase the generating capacity of each unit by as much as 17%. == Economic investment and opportunity ==