Zenvo TS1 GT

Engine The Zenvo TS1 GT is powered by a 5.8-litre Twin-supercharged V8 engine which is based on a Chevrolet GM architecture and is further modified and developed in-house, rated at at 7,100 rpm and of torque at 5,500 rpm. The engine has mid-rear mounted position. Transmission and suspension The TS1 GT is equipped with a 7-speed dual-clutch automatic with helical-cut dog gears. The transmission is paired with a Torsen limited-slip differential and the clutch consists of two discs. The car uses double wishbone suspension coupled with adjustable shocks and composite anti-roll bars on the front and rear axles. A hydraulic lifting mechanism is able to raise the front axle by 50 mm for extra ground clearance. Wheels The TS1 GT is equipped with forged aluminum wheels with diameters of at the front and at the rear. The car uses Michelin Pilot Sport 4S or Pilot Sport Cup 2 tires with codes of 265/35 ZR 19 at the front and 345/30 ZR 20 at the rear. The brakes are ventilated carbon ceramic discs, with a diameter of at the front and at the rear, each equipped with six-piston aluminum calipers. Interior features The interior of the Zenvo TS1 GT features a dashboard and central console finished in carbon-fiber and Alcantara, along with carbon-fiber bucket seats for the driver and passenger. The infotainment system includes a dashboard display, central display, and an Alpine audio system with Bluetooth connectivity. == Performance ==

The manufacturer claims an electronically limited top speed of for the TS1 GT. == Variants ==

Zenvo TSR . The Zenvo TSR is a track-only version of the TS1 GT. Launched alongside the TS1 GT at the 2016 Geneva Motor Show, the TSR shares most of its mechanical components with the road-legal car, including the same engine and body. The main changes in the TSR variant are a of weight reduction reducing the total weight to , revised gearing and power delivery for track use, and a fixed carbon-fibre wing on the rear of the car. A larger carbon-fibre front splitter and rear diffuser have also been fitted to improve airflow at higher speeds. The TSR's interior includes a full roll cage and 6 point harnesses, with the infotainment system of the TS1 GT having been removed to save weight. As a result of the gearing and aerodynamic changes, the top speed of the TSR is reduced to . Zenvo TSR-S .|alt= The Zenvo TSR-S is a road-legal version of the track-focused Zenvo TSR. Unveiled at the 2018 Geneva Motor Show, the TSR-S features numerous upgrades and design changes compared to the previous TS1 models and sits in-between the road-going, grand touring TS1 GT and the race-focused, track only TSR. On the exterior of the car, the TSR-S has been redesigned with a larger front grille and large integrated splitter and diffuser. The carbon-fiber wing on the rear of the car is able to rotate with two degrees of freedom, allowing for air braking and corner stabilization. Weight savings on the TSR-S sum to over the TS1 GT, bringing the total weight of the car down to . The powertrain of the TSR-S has also been updated, and the 5.8-liter twin-supercharged V8 now rated at at 8,500 rpm. These changes increase the claimed top speed of the TSR-GT to . The TSR-GT also features a more luxury-oriented interior, with leather upholstery in place of bare carbon fiber of previous TSR models and measures to reduce cabin noise. == See also ==