The goal of the 6.5mm Grendel design was to create an effective
STANAG magazine-length cartridge for the
AR-15 platform that could reach and surpass the performance of the native
5.56mm NATO/
.223 Remington cartridge. Constrained by the dimension of the STANAG magazines, the Grendel's designers decided to use a shorter, larger-diameter
case for higher
powder volume while allowing space for the long, streamlined, high ballistic coefficient 6.5mm (.264 cal.) bullets. Firing
factory-loaded
ammunition with bullets ranging from , its
muzzle velocity varies from with 129- and bullets to with bullets (similar in velocity to a 5.56 mm round). Depending on their case material and bullet weight, 6.5mm Grendel cartridges weigh . That is significantly more when compared to 8 to 12 grams (120 to 190 gr) 5.56mm NATO rounds. The case head diameter of the Grendel is the same as that of the
5.6×39mm (.220 Russian),
7.62×39mm and
6.5mm PPC cases. This diameter is larger than the
5.56×45mm NATO, thereby necessitating the use of a non-standard AR-15
bolt. The increased case diameter results in a small reduction in the magazine ammo capacities. A 6.5mm Grendel magazine with the same dimensions as a 30-round STANAG magazine will hold 26 rounds of Grendel ammunition. ==Performance==