Holloman High Speed Test Track

The HHSTT's mission is to provide a cost-effective, realistic, dynamic test environment for the entire acquisition community, including the DoD, other government agencies, contractors, and foreign governments. As a ground-based test facility, the HHSTT provides a cost-effective, controlled test environment for high-speed weapons, systems, and components. Full-scale flight tests tend to be more expensive than sled testing and present fewer opportunities to recover the test article for post-test evaluation. ==History==

The HHSTT was originally long when initial construction was completed in August 1949. The first test performed at the HHSTT was the launching of the Northrop N-25 Snark in 1950, but soon included human tolerance testing under the command of Colonel John P. Stapp. Col. Stapp was the last human test subject to ride the rocket-powered sleds at the HHSTT in December 1954. The track was lengthened to in 1956, followed by another extension to in 1957. The next major track extension occurred in 1974 when the rails from the Edwards Air Force Base test track were shipped to Holloman and added to the existing tracks to give a new total length of . During this upgrade, a third rail, approximately , was added for high-speed, narrow-gauge sleds. In 2000, pulldown extensions of were added to the north end of each rail, bringing the two primary rails to . ==Capabilities==

As of April 2014, over 12,400 sled tests have been performed at the HHSTT. The first sled tests were performed in 1950; the facility has been in continuous operation since. The HHSTT is unusual within the DoD Test and Evaluation community because it has organic management, engineering, fabrication, and test-operation capabilities in one location. This ability to provide a "one-stop-shop" reduces test costs and schedule issues associated with geographically separated project functions. A wide variety of tests have been performed at the HHSTT, including aircraft crew-escape systems, rain and particle erosion tests, impact testing, weapons dispense testing, electronic warfare, guidance system testing, and a wide array of aerodynamic tests. Because of the HHSTT's location on a military reservation in a sparsely populated area, tests may be performed in a secure environment. These large areas of open space may also be used to test items that are explosive, ballistic, or otherwise hazardous. ==Facilities==

. The most prominent feature of the facility is the rail system (similar in appearance to railroad tracks) used to launch rocket-powered test vehicles known as "sleds". The rail system is located just east of the White Sands National Park, and consists of a concrete foundation known as the girder that supports the two primary rails and a single tertiary rail. The westernmost rail is known as "A rail", followed by the adjacent "B rail" and "C rail". The alignment of the rails is nearly north–south. All three rails are fabricated from heavy-duty crane rail () and are maintained to an alignment of no more than deviation from a nominal reference line between rail tiedowns. A and B rails constitute the primary rails and are long. C rail, located at the north end of the track facility, is long. A and B rails are spaced , center to center, while C rail is spaced to the east of B rail. Despite the simple appearance of the setup, the tracks constitute the straightest system of track ever laid. Rails A, B, and C are continuously welded and pre-stressed to be under tension at temperatures below . Within the HHSTT infrastructure, there is a rainfield that is used to study the erosive effects caused by the impact of raindrops on material samples or components of weapon systems carried on rocket sleds. The rainfield system has been characterized for droplet size distribution and can simulate various combinations of rain environments from light rain to heavy rain, and produce flight conditions ranging from subsonic to hypersonic. This capability is used both for material development (usually involving systematic testing of material samples) and for qualifying flight hardware. A separate system is currently under construction to support magnetic levitation, or maglev, sled development. The reason for this system is to produce flight-like vibration environments that can not be achieved on the main steel rail track. This system performed its first test in 2012 and continues to be operational. Other facilities at the HHSTT include fabrication shops, project management and engineering buildings, munitions storage buildings, and heavy equipment staging areas. ==Data collection==

Electronic data, which include test timing, vehicle position, velocity, and acceleration, are routinely collected at the HHSTT. These data are captured by various means, including Doppler radar, optical beam interrupter blades, breakwire installations and magnetic sensors, and a wide variety of component sensors to collect specialized data such as acceleration forces, strain, temperature, etc. The data are collected with a variety of onboard data acquisition systems or telemetered for post-test analysis. Additionally, world-class technical imagery, including high-speed digital images, is available for customers to examine the status of their payloads. Track personnel use the same imagery to determine the status of the sled vehicle during tests. All data can be post-processed and merged using a common time reference to verify the accuracy of the data, and to produce a unified data product. Optical imagery is captured with high-speed digital cameras. Local meteorological data (e.g., temperature and barometric pressure) are also collected for each test for the calculation of Mach number or knots equivalent air speed as desired by the test customer. ==References==