Atom interferometer

Interferometry splits a wave into a superposition along two different paths. A spatially dependent potential or a local interaction differentiates the paths, introducing a phase difference between waves. Atom interferometers use center of mass matter waves with short de Broglie wavelength. Experiments using molecules have been proposed to search for the limits of quantum mechanics by leveraging the molecules' shorter De Broglie wavelengths. ==History==

Interference of atom matter waves was first observed by Immanuel Estermann and Otto Stern in 1930, when a sodium (Na) beam was diffracted off a surface of sodium chloride (NaCl). The first modern atom interferometer reported was a double-slit experiment with metastable helium atoms and a microfabricated double slit by O. Carnal and Jürgen Mlynek in 1991, and an interferometer using three microfabricated diffraction gratings and Na atoms in the group around David E. Pritchard at the Massachusetts Institute of Technology (MIT). Shortly afterwards, an optical version of a Ramsey spectrometer typically used in atomic clocks was recognized also as an atom interferometer at the Physikalisch-Technische Bundesanstalt (PTB) in Braunschweig, Germany. The largest physical separation between the partial wave packets of atoms was achieved using laser cooling techniques and stimulated Raman transitions by Steven Chu and his coworkers in Stanford University. In 1999, the diffraction of C60 fullerenes by researchers from the University of Vienna was reported. Fullerenes are comparatively large and massive objects, having an atomic mass of about . The de Broglie wavelength of the incident beam was about 2.5 pm, whereas the diameter of the molecule is about 1 nm, about 400 times larger. In 2012, these far-field diffraction experiments could be extended to phthalocyanine molecules and their heavier derivatives, which are composed of 58 and 114 atoms respectively. In these experiments the build-up of such interference patterns could be recorded in real time and with single molecule sensitivity. In 2003, the Vienna group also demonstrated the wave nature of tetraphenylporphyrin—a flat biodye with an extension of about 2 nm and a mass of 614 Da. For this demonstration they employed a near-field Talbot–Lau interferometer. In the same interferometer they also found interference fringes for C60F48, a fluorinated buckyball with a mass of about 1600 Da, composed of 108 atoms. In 2011, the interference of molecules as heavy as 6910 Da could be demonstrated in a Kapitza–Dirac–Talbot–Lau interferometer. In 2013, the interference of molecules beyond 10,000 Da has been demonstrated. The 2008 comprehensive review by Alexander D. Cronin, Jörg Schmiedmayer, and David E. Pritchard documents many new experimental approaches to atom interferometry. More recently atom interferometers have begun moving out of laboratory conditions and have begun to address a variety of applications in real world environments. == Interferometer types ==

, the first step in generating an atom interferometer. While the use of atoms offers easy access to higher frequencies (and thus accuracies) than light, atoms possess mass and move slower; thus they are affected more noticeably by gravity compared to beams of light. In some apparatuses, the atoms are ejected upwards and the interferometry takes place while the atoms are in flight, or while falling in free flight. In other experiments gravitational effects by free acceleration are not negated; additional forces are used to compensate for gravity. These guided systems in principle can provide arbitrary amounts of measurement time, provided quantum coherence is preserved. The early atom interferometers deployed slits or wires for the beam splitters and mirrors. Later systems, especially the guided ones, used light forces for splitting and reflecting of the matter wave. Light pulse atom interferometer A prototypical technique for atom interferometry involves splitting, reflecting, and recombining atomic matter waves using pulses of light. This technique is also called the Kasevich-Chu atom interferometer, named after the authors of the 1991 paper. This method employs counter-propagating beams of light that produce transitions between two quantum states labeled |0 \rangle and |1\rangle. Both lasers are tuned off-resonance from the excited state by a frequency Δ to avoid resonantly exciting and heating the atoms. In addition to changing the spin state of the atom, the counter-propagating Raman transition provides a momentum kick \hbar \vec{k}_{eff} = \hbar ( \vec{k}_2 - \vec{k}_1 ) to one of the components.P = \frac{1}{2} \left(1-C \cos(\Delta \varphi)\right),where C is the visibility or contrast of the interferometer fringe. Since the matter wave is in free-fall with respect to gravity, the phase difference depends on the gravitational acceleration g as The sensitivity of the interferometer to gravitational or inertial forces depends on: • The space–time area enclosed by the interferometer, which increases for larger T. • The relative phase stability of the counter-propagating Raman beams. • The number of atoms in the cold, trapped ensemble that complete the interferometer. A larger fraction of participating atoms increases C. Due to the Doppler effect, atoms with finite temperature may not experience exactly \pi/2 or \pi Raman pulses. == Examples ==

Gravitational physics A precise measurement of gravitational redshift was made in 2009 by Holger Muller, Achim Peters, and Steven Chu. No violations of general relativity were found to . In 2020, Peter Asenbaum, Chris Overstreet, Minjeong Kim, Joseph Curti, and Mark A. Kasevich used atom interferometry to test the principle of equivalence in general relativity. They found no violations to about . The sensitivity of an atom interferometer to external influences generally improves as the matter wave's separation time increases. which is known to interact with regular matter only via gravity. Space-based atom interferometers may be more sensitive to weak gravitational waves than terrestrial observatories such as LIGO. Inertial navigation Atomic interferometer gyroscopes (AIG) and atomic spin gyroscopes (ASG) use atomic interferometer to sense rotation or in the latter case, uses atomic spin to sense rotation with both having compact size, high precision, and the possibility of being made on a chip-scale. == See also ==