All TTs are made up of both custom and commercial chips: • Custom chips •
TT Shifter "TT Video shift register chip" — Enables bitmap graphics. Features a 64-bit wide bus with interleaved access to ("dual purpose") system memory and on-chip buffers for high bandwidths. Contiguous 32 KB memory for ST modes, 154 KB for TT modes. •
TT GLU "Generalized Logic Unit" — Control logic for the system used to connect the STs chips. Not part of the data path, but needed to bridge chips with each other. Used in TT and MEGA STE. •
DMA "Direct Memory Access" — Three independent channels, one for floppy and hard drive data transfers, one for the SCSI port and one for 85C30 SCC network port. Direct access to ("dual purpose") system memory in the ST. 2 chips used. •
MCU "Memory Control Unit" — For system RAM. • Support chips •
MC6850P ACIA "Asynchronous Common Interface Adapter" — Enables the ST to directly communicate with MIDI devices and keyboard (2 chips used). 31.25 kilobaud for MIDI, 7812.5 bit/s for keyboard. •
MC68901 MFP "Multi Function Peripheral" — Used as an interrupt controller, timers and RS232C ports (2 chips used). •
NCR 5380 "SCSI Controller" — 8-bit asynchronous transfers up to 4 MB/s. •
WD-1772-PH "Western Digital Floppy Disk Controller" — Floppy controller chip. •
Zilog 85C30 SCC "Zilog Serial Communications Controller" — Two high-speed SDLC serial ports. •
YM2149F PSG "Programmable Sound Generator" — Provides 3-voice sound synthesis, also used for floppy signalling and printer port. •
HD6301V1 "Hitachi keyboard processor" — Used for keyboard scanning and mouse/joystick ports. •
MC146818A "Motorola Real Time Clock" • CPU:
Motorola 68030 @ 32
MHz (system bus @ 16 MHz) • FPU:
Motorola 68882 @ 32
MHz • RAM: • System RAM ("dual purpose") 2
MB ST RAM expandable to 10 MB • TT RAM ("single purpose") expandable to 256 MB TT RAM on daughter board using either 30-pin or 72-pin
SIMMs • Sound:
Yamaha YM2149 + Stereo DMA 8-bit
PCM, same as in the
STe • Drive: 1.44 MB (later version) or 720 KB (first TT version) 3½"
floppy disk drive • Ports: •
MIDI In/Out • 3 x
RS-232 • Serial
LAN RS-422 • Printer •
VGA Monitor (analog
RGB and
Mono) • Extra Disk drive port • ACSI and
SCSI port •
VMEbus inside case • Cartridge (128 KB) • Keyboard (detachable) • Joystick and Mouse ports (on keyboard) •
Operating System: • Atari's
TOS with the
Graphics Environment Manager (GEM)
graphical user interface (GUI) TOS versions: 3.01, 3.05 or 3.06 in ROM. Four socketed 1
Mb ROMs providing 512 KB of ROM space. •
MiNT •
MagiC • Atari System V •
NetBSD • Display modes: • Color: 320×200 (16 color), 320×480 (256 colors or 256 greyscales), 640×200 (4 colors), 640×480 (16 colors), palette of 4096 colors • Duochrome: 640×400 (2 colors) • Monochrome: 1280×960 mono TT high with
ECL 19 in (483 mm) TTM195 monitor • Character set:
Atari ST character set, based on
codepage 437. • Case: Two-piece desktop-style. • Release Date: 1990-1991 The (at least) two versions of the TT can be distinguished by: • Internal sheet plate (old) or coating (new) for electromagnetic compatibility • CPU and FPU on daughter board (old) or directly on main board (new) • 1.44 MB HD floppy drive (720 KB DD floppy drive on older models) • Some (very?) old models have 2 fans, on the rear left and right == Emulation ==