The Seville, introduced in May 1975 as an early 1976 model, was Cadillac's answer to the rising popularity of European
luxury imports as
Mercedes-Benz,
Audi and
BMW. GM planners were becoming concerned that the division's once-vaunted image as the "standard of the world" was fading, especially among younger generations of car buyers. Over time, European luxury cars had become quite luxurious and even more expensive than the much larger Cadillacs. As market share of these imports continued to climb, it became obvious that the traditional American automotive paradigm of "bigger equals better" had begun to falter. The Seville became the smallest and most expensive model in the lineup, turning Cadillac's traditional marketing and pricing strategy upside down. Full size design prototypes were created as early as winter of 1972–73 (wearing the tentative name
LaSalle, reviving the Cadillac junior brand from 1927 to 1940). Subsequent design prototypes looked edgier (specifically a 1973 named LaScala which forwardly hinted at the 1992 Seville). Styling took strong cues from the
Rolls-Royce Silver Shadow. Cadillac stylists added a crisp, angular body that set the tone for GM styling for the next decade, along with a wide track stance, giving the car a substantial, premium appearance. A wide chrome grille flanked by quadruple rectangular headlamps with narrow parking and signal lamps just below the header panel, while small wrap-around rectangular tail lamps placed at the outermost corners of the rear gave the appearance of a lower, leaner, and wider car. The taillight design was similar to that used on a rejected
Coupe DeVille concept.
Unibody construction included a bolt-on subframe with a rear suspension based on the
rear-wheel drive 1968–74
X-body platform that underpinned a range of compact GM autos. It also featured a rear differential with thicker front subframe bushings similar to the second generation F platform used in the Camaro, Firebird, and the 1975–79 X-body platform. For the substantial re-engineering and upgrades from the X platform, it was given the unique designation
"K-body". Also shared with the X-body platform was part of the roof stamping and trunk floor pan (for 1975 and newer vehicles). Seville engineers chose the X-body platform instead of the originally intended to be used German
Opel Diplomat in response to GM's budget restrictions—executives felt re-engineering an Opel would be more costly. Cadillac, the Seville was almost lighter than the full-sized Deville. The Seville was thus more nimble and easy to park, as well as retaining a full complement of Cadillac features. More expensive than any other Cadillac (except the Series 75 Fleetwood factory limousines) at US$12,479 ($ in dollars ), the Seville was successful enough to spawn several imitators, including the unsuccessful
Lincoln Versailles and the
Chrysler LeBaron (
"Fifth Avenue" after 1982). To ensure the quality of the initial production run, the first 2,000 units produced were identical in color (Georgian silver) and options. This enabled workers to "ramp up" to building different configurations. Total 1976 Seville production was 43,772 vehicles. Early Sevilles produced between April 1975 (a total of 16,355) to the close of the 1976 model year were the first Cadillacs to use the smaller GM wheel bolt pattern (5 lugs with a bolt circle; the 2003–2009
XLR also uses this pattern). The first Sevilles shared a minority of components with the X-Body. The rear drums measured and were similar to the ones used with the Nova
9C1 (police option) and
A-body (
Chevelle,
Cutlass,
Regal,
LeMans) intermediate
station wagons. Starting with the 1977 model year, production Sevilles used the larger 5-lug bolt circle common to full-size Chevrolet passenger cars (1971–76), Cadillacs, Buicks, Oldsmobiles, Pontiacs, and half-ton Chevrolet/GMC light trucks and vans. It also received rear disc brakes, a design which would surface a year later as an option on the F-body
Pontiac Trans Am. 1975–76 models included a vinyl roof, to less expensively cover the roof's two part construction, the rear section around the C-pillar was pressed especially for Cadillac and X-body pressing was used for the forward section. Due to customer demand, a painted steel roof was offered in 1977, requiring a new full roof stamping. 1977 Seville production increased slightly to 45,060 vehicles. The last year, production increased to the first generation's peak production, at 56,985. The engine was an
Oldsmobile-sourced
V8, fitted with a
Bendix analog port
fuel injection system. This system gave the Seville smooth driveability and performance that was usually lacking in domestic cars of this early emissions control era. Power output was , and fuel economy was 15 MPG in the city and 21 MPG on the highway. While standard on Seville, this EFI system was optional on the full size models starting in 1975. For 1980, an integrated LED-based
MPG Sentinel display panel became standard equipment, and a VFD digital speedometer cluster was offered as optional starting in 1981. A number of custom coach builders made modifications to the 1975–1979 Seville, including shortened 2-seat 2-door convertibles, a 2-door convertible with a back seat, a 2-door pickup truck, 2-door coupes, 2- and 4-door lengthened-hood Sevilles with a fake spare tire in each front fender, and a lengthened-wheelbase standard 4-door Seville. In the late 1970s, Florida coachbuilder, Grandeur Motor Car Company, offered converted Sevilles with
neoclassical 1930s styling cues. These sedans were converted mostly into 2-door coupes with an elongated hood, fake spare tire covers on both sides, a small portal window in the rear right section of the vinyl-covered roof, and an upright
Lincoln Mark series-like grille. An estimated 600 Seville Opera Coupes were produced. The Seville was manufactured in
Iran under the brand name of "Cadillac Iran" from 1978 to 1987 by
Pars Khodro, which was known as "Iran General Motors" before the Islamic Revolution. A total of 2,653 Cadillacs were made in Iran during this period. This made Iran the only country assembling Cadillacs outside the US until 1997 when the Opel Omega-based
Catera was built in Germany for US sale. The
Cadillac BLS, built in Sweden exclusively for European market, was introduced in 2006. Although the
Allanté had an Italian-sourced body and interior, its final assembly was done in the US.
Elegante From 1978, through the third generation in 1988, the Seville was available with the
Elegante package. It added a unique black/silver two-tone exterior paint combination and perforated leather seats in light gray only. Real wire wheels were standard as were a host of other features which were optional or unavailable on the base Seville. In 1979, a second color combination was added, a two-tone copper shade with a matching leather interior. For the second generation Elegante in 1985, a monotone paint combination became available; however, dual-shade combinations, later available in various colors, remained more popular. The price for this package increased over time from $2,600 in 1978 ($ in dollars ) to $4,005 ($ in dollars ) in 1987 in addition to the base price.
Production Engines == Second generation (1980–1985) ==