Whitewash cures through a reaction with
carbon dioxide in the atmosphere to form
calcium carbonate in the form of
calcite, a type of reaction generally known as
carbonation or by the more specific term,
carbonatation. It is usually applied to exteriors, or interiors of rural
dairies because of its mildly antibacterial properties. Whitewash can be tinted for decorative use and is sometimes painted inside structures such as the hallways of apartment buildings. A small amount can rub off onto
clothing. In Britain and Ireland, whitewash was used historically in interiors and exteriors of workers'
cottages and still retains something of this association with
rural poverty. In the United States, a similar attitude is expressed in the old saying "Too proud to whitewash and too poor to paint." The historic
California Missions were commonly whitewashed, giving them their distinctive bright white appearance. Whitewash is especially compatible with
masonry because it is absorbed easily and the resultant chemical reaction hardens the medium.
Lime wash is pure slaked lime in water. It produces a unique surface glow due to the
double refraction of
calcite crystals. Limewash and whitewash both cure to become the same material. When whitewash or limewash is initially applied, it has very low
opacity, which can lead novices to overthicken the paint. Drying increases opacity and subsequent curing increases opacity even further. Limewash relies on being drawn into a substrate unlike a modern paint that adheres to the surface. The process of being drawn in needs to be controlled by damping down. If a wall is not damped, it can leave the lime and pigments on the surface powdery; if the wall is saturated, then there is no surface tension and this can result in failure of the limewash. Damping down is not difficult but it does need to be considered before application of the limewash.
Additives Additives traditionally used include
water glass,
glue,
egg white,
Portland cement,
salt,
soap,
milk,
flour, molasses, alum, and
soil. Whitewash is sometimes coloured with
earths to achieve colours spanning the range of
broken white,
cream,
yellow and a range of
browns. The
blue laundry dye (such as Reckitt's "Dolly Blue" in the UK, Ireland and Australia, Loulaki in Greece, or
Mrs. Stewart's Bluing in North America), formerly widely used to give a bright tinge to boiled white textiles, was a common 19th century addition. Historically, pig's
blood was added to give the colour
Suffolk pink, a colour still widely used on house exteriors in some areas of the UK. If animal blood is applied excessively, its iron oxide can compromise the lime binder's strength.
Pozzolanic materials are occasionally added to give a much harder wearing paint finish. This addition creates a short open time and therefore requires timely application of the altered paint.
Linseed oil is sometimes added (typically 0.5-2%) to improve adhesion on difficult surfaces.
Cement addition makes a harder wearing paint in
white or
grey. Open time is short, so this is added at point of use. Cement restricts the breathable aspects of the limewash and is inadvisable for preserved historic buildings. Dilute
glues improve paint toughness.
Wheat flour has been used as a strength enhancing binder.
Salt is often added to prevent
mold.
Limitations Basic limewash can be inadequate in its ability to prevent rain-driven water ingress. Additives are being developed but these have the potential for affecting free vapor permeability. For this reason
silicate paints, more common in Germany, are gaining popularity in the UK over limewash. == Applications ==