Later Chinese writers dated the introduction of carved lacquer to the
Tang dynasty (618–906), and many modern writers have pointed to some late Tang pieces of armour found on the
Silk Road by
Aurel Stein and now in the
British Museum. These are red and black lacquer on
camel hide, but the lacquer is very thin, "less than one millimeter in thickness", and the effect very different, with simple abstract shapes on a plain field and almost no impression of
relief.
Song dynasty, and the main types of subject matter The style of carving into thick lacquer used later is first seen in the
Southern Song (1127–1279), following the development of techniques for making very thick lacquer. There is some evidence from literary sources that it had existed in the late Tang. At first the style of decoration used is known as
guri () from the Japanese word for the ring-pommel of a sword, where the same motifs were used in metal, and is often called the "Sword-Pommel pattern" in English. This style uses a family of repeated two-branched scrolling shapes cut with a rounded profile at the surface, but below that a "V" section through layers of lacquer in different colours (black, red and yellow, and later green), giving a "marbled" effect from the contrasted colours; this technique is called
tìxī () in Chinese. This style continued to be used up to the
Ming dynasty, especially on small boxes and jars with covers, though after the Song only red was often used, and the motifs were often carved with wider flat spaces at the bottom level to be exposed. Most Song carved lacquer to survive is in the
guri and
tixi style and technique, but the period also saw the development of a pictorial style, and the beginning of the two other main streams of
iconography that were to dominate the rest of the history of carved lacquer, though surviving examples from the Song are rare. Both relate to
Chinese art in other media, and use the existing vocabulary of Chinese ornament for borders. The first type of subject is scenes of people in a landscape, derived mainly from
Chinese painting and
woodcut book illustrations; such scenes were only later to be found in
Chinese ceramics. The settings quickly became fairly standardized, with a few figures close to one or more buildings, in a garden setting, perhaps near water or a road (the English
chinoiserie "
Willow pattern" is just such a scene). A convention developed by which the areas of sky, water and land (floor or ground) left largely blank in paintings are filled in with discreet patterns derived from textiles, known as "
brocade-grounds" and also "
diaper backgrounds"; this convention has continued to modern times. Standard groups of patterns for each type are followed in work from the imperial workshops, but may be mixed up in work from the commercial workshops. The precise form of patterns used can be a factor in dating pieces, but in general "The background diaper of sky consisted of looping clouds, diapers representing water were cut in rhomboid curves for waves, and the land and paving had diapers with geometricized flowers". The other main type of subject was birds against a foliage background that filled the whole carved area, or just flowers and foliage treated in the same way. Dragons and phoenixes were also treated in this style, and became very prominent in Ming imperial works (see below). A design of this type known as the "two birds" was especially successful aesthetically and often used; in later examples the birds are often the
fenghuang or Chinese phoenix. The style continued to develop until reaching its finest period in the early Ming dynasty, and has continued to be produced. Plant decoration of this sort was later generally used to fill in borders and other spaces around other types of subject, such as the edges and legs of furniture. This style relates to a broad tradition of Chinese ornament reaching back into Chinese antiquity in stone reliefs, metalwork and other media, including ceramics. Lacquer was among the luxury products often given by the emperor as diplomatic or political gifts, or to the subsidiary courts of princes of the imperial house. Japanese collections, often accumulated in temples, have a high proportion of the surviving early Chinese carved lacquer pieces. The
Engaku-ji temple in
Kamakura has an especially important group of pieces, some of which are credibly reputed to have been brought to Japan by its founder, a refugee monk escaping the fall of the Song dynasty to the Mongols in 1279.
Guri pattern and tixi technique File:Cup (Bei) with Sword-Pommel Pattern LACMA M.90.70.2.jpg|
Bei (Cup) with
guri Sword-Pommel Pattern, in
tixi, with silver interior. Song or Yuan. Straight sides to grooves, and several thin layers of red. File:Dish (Pan) with Sword-Pommel Pattern LACMA M.82.135.jpg|
Pan (Dish) with Sword-Pommel Pattern, Yuan. Brown with red layers File:Cup Stand (Tuozhan) in the Form of a Lotus Blossom with Sword-Pommel Pattern LACMA M.79.89.4.jpg|
Tuozhan (Cup Stand) in the Form of a Lotus Blossom with Sword-Pommel Pattern, early Ming. Very rounded carving, and a few black layers. File:Foliated Dish (Pan) with Sword-Pommel Pattern LACMA M.87.203 (cropped).jpg|Foliated
Pan (Dish) with Sword-Pommel Pattern, detail of the tray and layers of different colours can be seen above.
Yuan , 16 cm across In the Yuan dynasty the development of Song styles continued, especially from about 1320, after something of a hiatus (as also seen in other arts). Pieces in the Sword-Pommel pattern have more rounded tops to the ridges, and more narrow bottoms. The artistic quality of carving was perhaps never higher, in all the main streams of iconography: Sword-Pommel pattern, birds, flowers and foliage, and figures in landscapes. In the crowded, "exuberant and complex" designs with birds and plants, the forms overlap and curl in a more sculptural fashion, allowed by slightly thicker lacquer. By the late Yuan the reputation of individual masters has come down to us, although few pieces are signed and even these cannot be very confidently assigned to an artist, as the signatures may not be genuine. Yang Mao and Zhang Cheng were the most famous masters, both from
Jiaxing in the southern province of
Zhejiang.
Bird and plant designs File:Circular Box with Camellias.jpg|Box with Camellias, Song File:Tray (Pan) in the Form of a Plum Blossom with Birds and Flowers LACMA M.86.330 (1 of 2).jpg|Tray with two birds against a background of plum blossom and flowers, 19 cm wide, late Song, 13th century (
oblique view). No overlapping of forms, and relatively wide strips of background visible. File:Seal Paste Box (Yinnihe) with Litchi Stems LACMA M.87.205a-b (2 of 2).jpg|
Yinni He (Seal Paste Box) with Litchi Stems, 7.5 cm wide, Middle Ming, 1450–1500. Brocade-ground patterns are used both for the background and on the fruit. File:Box (He) with Pair of Pheasants in Peonies LACMA M.80.96.1a-b.jpg|
He (Box) with Pair of Pheasants in Peonies, late Ming, 19 cm wide. Thin top layers of red over black give effective contrasts.
Ming period tray with "frontal" dragon against a background of clouds, with a floral border. Red over rather faded
buff yellow lacquer Chinese diplomatic gifts to the Japanese government in the early Ming are especially well-documented on the Japanese side, at a time when the
Ashikaga shogunate was enjoying a period of improved relations with China. In 1403 a consignment of luxury goods, also including
Chinese silks and lacquered
Chinese furniture, had 58 pieces of carved red lacquerware in a range of shapes. Lists with descriptions and measurements that allow some surviving pieces to be identified also survive from 1406, 1407, 1433 and 1434. These confirm that carved red lacquer was already "the favored type of lacquer for court use" by this point. Most early production of lacquer had been in the more suitable hot and moist climate of the south, but from the early Ming onwards the finest work was often from official workshops in Beijing, and the best early Ming work is "technically ... as near perfection as has ever been possible". The "Orchard Factory" was founded around 1416 in
Lingjing hutong in
Beijing, near the
Forbidden City. It used imported workers from the south, the masters from
Jiaxing in
Zhejiang province, and other workers from
Yunnan and
Sichuan. As part of the internal tax or tribute system, about 5,000 workers from the south were required to work in the imperial workshops for terms of four years. The raw lacquer was also imported from the south, as the
Chinese lacquer tree will not grow as far north as Beijing. Beijing was an unpromising location for lacquer production, being very cold in winter, and with dry and dusty air; the opposite of what was best. The Orchard Factory closed in 1436, after only some 20 years of operations. The production of imperial wares seems to have lapsed between 1436 and 1522, after another Mongol invasion, from which lacquer production took longer to recover than
Jingdezhen porcelain. in the
Victoria and Albert Museum, 1425–1436 In the Ming period the
dragon became a key imperial symbol, very often appearing on lacquer from the imperial workshops for the use of the court, or made to be given by the emperor. Initially the dragon's head was seen in the traditional profile but in the middle of the 15th century the "frontal" dragon, seen looking out full-face at the viewer, was introduced and soon became the norm in lacquer as in other media. By at least the Ming dynasty carved lacquer was being used all over the visible surfaces of pieces of furniture, a dauntingly expensive proposition. One of the best known pieces is a
desk-sized table with three drawers in the
Victoria and Albert Museum in London, whose top has a typical imperial Ming design with a central dragon and phoenix, symbolizing the emperor and empress respectively. The table-top measures 119.5 cm by 84.5 cm and it was produced between 1425 and 1436 in the "Orchard Factory", and is the only piece of its size to survive from their production, the best period of Ming workmanship. As with many other pieces, the ground of the relief was originally a yellow that contrasted with the red of the upper layers, but has now faded to a dark colour. Black grounds under red carved layers were also common from this period, but in some cases what now appears black may originally have been green. A less common type, often of very high quality, has black upper layers on a red ground. From about 1400, the "brocade-ground" patterns already used for floors and sky in scenes of figures in a landscape were also used in depicting plant designs, both on the backgrounds and on the leaves or fruits of the plants themselves, "a curious development". More logically, they were also used for the background of non-representational designs such as characters of Chinese script. Though sometimes used earlier, polychrome carved lacquer in a variety of the
tixi technique was only prominent during the period between the
Jiajing Emperor and Wanli Emperor (1521–1620). This involved carving different parts of the image down to expose a layer in a different colour, so building up a coloured image.
Landscape and figure designs File:Carved lacquer wooden box, Ming Dynasty.jpg|The palace of
Chang'e, goddess of the moon, in black over red, 1490s File:Dish (Pan) in the Form of a Flower with Children Playing in a Garden LACMA M.85.153.2.jpg|
Pan (Dish) with Children Playing in a Garden, a popular subject. Ming, Yongle File:Qing Dynasty lacquered fruit box.JPG|Qing "fruit box" with typical genre scene File:Small Box (He) with Elderly Woman and Young Boy Tending Bamboo in a Garden LACMA M.90.70.4a-b.jpg|
He (Small Box) with Elderly Woman and Young Boy Tending Bamboo in a Garden. Qing, Qianlong. Note the three kinds of brocade-ground.
Qing Another imperial factory was founded beside the Forbidden City in 1680 under the
Qing dynasty by the
Kangxi Emperor and was still producing under the
Qianlong Emperor (1736–95), "one of the most prodigal spenders in Chinese history" and a great lover of carved lacquer. Referring to the traditional complaints, stretching back to the
Han dynasty, about the cost to the imperial budget of "ordinary" lacquerware, he had a carved Ming piece in the imperial collection engraved with an inscription beginning "Lacquer is cause for ten officials to complain; what if it is also carved?". . Adilnor Collection, Sweden. By the Qing period the repertoire of subjects for carved lacquer was essentially complete, but one addition in the Qianlong reign was a few pieces showing foreigners, mostly Central Asians bearing tribute though landscapes. Combination techniques of other techniques sometimes included carving, but more often slightly raised areas built up by applying fillers to the base surface before the lacquer was applied. After the death of the Qianlong Emperor both the quality and quantity of imperial production sharply declined, and has never reached the previous standard again. ==Manufacturing process==