The genus is known only from a partial upper
molar 10.7 mm long and 12.3 mm wide, missing the posterior section. The molar is smaller than those of
Moeritherium, but larger than those of
Eritherium and
Phosphatherium. The tooth was low-crowned, more clearly than that of
Moeritherium. The masticatory surface had four cusps. However, their tips were apparently broken off before fossilization. The four cusps each formed two pairs, which were arranged perpendicular to the longitudinal axis of the tooth, giving it a
bilophodont structure characteristic of early proboscideans. The front pair of cusps (the paracone and the protocone) had no additional ridges. The bases of the two cusps were connected to each other, and a side cusp formed a paraconule. The rear pair of cusps (the metacone and hypocone) are damaged, but the hypocone was originally relatively central and was very large, its dimensions similar to those of the protocone. Its inward shifted position differs from the more marginal position of
Moeritherium's hypocone. There was no metaconule on the second pair of cusps. The central longitudinal groove, which divides the tooth into two halves was only weakly developed. A well-developed
cingulum was present on the tongue side. The presence and position of the cingulum distinguishes
Saloumia from
Moeritherium. On both the tongue and cheek sides, the cingulum merged into a shearing edge. The enamel as a whole was thick and heavily grooved. == Discovery and naming ==