•
Conical stone spires: These are usually found on circular towers and turrets, usually of small diameter. •
Masonry spires: These are found on medieval and revival churches and cathedrals, generally with towers that are square in plan. While masonry spires on a tower of small plan may be pyramidal, spires on towers of large plan are generally octagonal. The spire is supported on stone squinches which span the corners of the tower, making an octagonal plan. The spire of
Salisbury Cathedral is of this type and is the tallest masonry spire in the world, remaining substantially intact since the 13th century. Other spires of this sort include the south spire of
Chartres Cathedral, and the spires of
Norwich Cathedral,
Chichester Cathedral and
Oxford Cathedral. •
Openwork spires: These spires are constructed of a network of stone tracery, which, being considerably lighter than a masonry spire, can be built to greater heights. Many famous tall spires are of this type, including the spires of
Ulm Minster (the world's tallest church),
Freiburg Minster,
Strasbourg Cathedral,
Vienna Cathedral,
Prague Cathedral,
Burgos Cathedral and the twin spires of
Cologne Cathedral. •
Complex spires: These are stone spires that combine both masonry and openwork elements. Some such spires were constructed in the Gothic style, such as the north spire of Chartres Cathedral. They became increasingly common in
Baroque architecture, and are a feature of
Christopher Wren's churches. •
Clad spires: These are constructed with a wooden frame, often standing on a tower of brick or stone construction, but also occurring on wooden towers in countries where wooden buildings are prevalent. They are often clad in metal, such as copper or lead. They may also be tiled or shingled. :Clad spires can take a variety of shapes. These include: ::
Pyramidal spires, which may be of low profile, rising to a height not much greater than its width, or, more rarely, of high profile. ::
Rhenish helm: This is a four-sided tower topped with a pyramidal roof. each of the four sides of the roof is
rhomboid in form, with the long diagonal running from the apex of roof to one of the corners of the supporting tower; each side of the tower is thus topped with a gable from whose peak a ridge runs to the apex of the roof. ::
Broach spires: These are octagonal spires sitting on a square tower, with a section of spire rising from each corner of the tower, and bridging the spaces between the corners and four of the sides. ::
Bell-shaped spires: These spires, sometimes square in plan, occur mostly in Northern, Alpine and Eastern Europe, where they occur alternately with onion-shaped domes. ==Notable spires==