Unlike enamel, dentin may be demineralized and stained for
histological study. Dentin consists of microscopic channels, called dentinal tubules, which radiate outward through the dentin from the pulp to the exterior cementum or enamel border. The dentinal tubules extend from the dentinoenamel junction (DEJ) in the crown area, or dentinocemental junction (DCJ) in the root area, to the outer wall of the pulp. From the outer surface of the dentin to the area nearest the pulp, these tubules follow an S-shaped path. The diameter and density of the tubules are greatest near the pulp. Tapering from the inner to the outermost surface, they have a diameter of 2.5 μm near the pulp, 1.2 μm in the middle of the dentin, and 0.9 μm at the
dentinoenamel junction. Their density is 59,000 to 76,000 per square millimeter near the pulp, whereas the density is only half as much near the enamel. Within the tubules, there is an
odontoblast process, which is an extension of an odontoblast, and dentinal fluid, which contains a mixture of
albumin,
transferrin,
tenascin and
proteoglycans. In addition, there are branching canalicular systems that connect to each other. These branches have been categorized by size, with major being 500–1000 nm in diameter, fine being 300–700 nm, and micro being less than 300 nm. Because of dentinal tubules, dentin has a degree of
permeability, which can increase the sensation of pain and the rate of
tooth decay. The strongest held theory of dentinal hypersensitivity suggests that it is due to changes in the dentinal fluid associated with the processes, possibly a type of hydrodynamic mechanism. Dentin is a bone-like matrix that is porous and yellow-hued material. It is made up, by weight, of 70–72% inorganic materials (mainly
hydroxylapatite and some non-crystalline amorphous
calcium phosphate), 20% organic materials (90% of which is
collagen type 1 and the remaining 10% ground substance, which includes dentin-specific
proteins), and 8–10% water (which is adsorbed on the surface of the minerals or between the crystals). Because it is less mineralized than enamel, it decays more rapidly and is subject to severe cavities if not properly treated, but due to its elastic properties, it is good support for enamel. Its flexibility prevents the brittle enamel fracturing during tooth preparation. In areas where both primary and secondary mineralization have occurred with complete crystalline fusion, these appear as lighter rounded areas on a stained section of dentin and are considered globular dentin. In contrast, the darker arc-like areas in a stained section of dentin are considered interglobular dentin. In these areas, only primary mineralization has occurred within the predentin, and the globules of dentin do not fuse completely. Thus, interglobular dentin is slightly less mineralized than globular dentin. Interglobular dentin is especially evident in coronal dentin, near the dentinoenamel junction (DEJ), and in certain dental anomalies, such as in
dentinogenesis imperfecta. The dentinal tubules in this region branch profusely. In the root of the tooth there are two morphologically distinguishable outer layers: the hyaline layer on the periphery of dentin and Tomes granular layer beneath this. The granular layer has a dark, granular appearance which occurs due to the branching and looping back of dentinal tubules in this region. This appearance, specific to root dentin, is possibly due to differences in the rates of formation of coronal and root dentin. The hyaline layer, which has an obscure origin, is a clear layer, unlike the granular layer, with a width of up to 20μm. It can have clinical significance during periodontal regeneration. Circumpulpal dentin forms the majority of the dentin and is generally constant in structure. Peripherally, mineralization can be seen to be incomplete, whereas centrally the mineralizing front shows ongoing mineralizing. The innermost layer of dentin is known as predentin, and is the initial dentin matrix that is laid down prior to mineralization. It can be distinguished by its pale color when stained with haematoxylin and eosin. The presence of odontoblastic processes here allows the secretion of matrix components. Predentin can be 10-40μm in width, depending on its rate of deposition. ITD comprises the bulk of the dentin and, similarly to
bone, is a matrix composite of tablet-shaped
hydroxyapatite nanoparticles wrapped around collagen fibers. The mineralized
collagen fibers are arranged in layers oriented perpendicular to the direction of the dentin microtubules which are lined with peritubular dentin (PTD), a 1-2 μm thick layer of hydroxyapatite tablets with no preferred orientation and lacks any supporting collagen fibers. The hydroxyapatite tablets within the ITD were found to be compressed along the crystallographic c-axis due to tight interaction between the tablets and the collagen fiber. Tablets aligned parallel with the collagen fibers experience a significant increase in
compressive stress of around 90 MPa and, for crack formation to occur, tensile stresses must first overcome this residual compressive stress. Since typical mastication stresses do not exceed 40 MPa, the ITD prevents cracks from forming during normal daily use and helps deflect cracks perpendicular to the dentin tubule and away from the pulp. Inelastic deformation of dentin primarily happens through microcracking.
Crack propagation within dentin travels preferentially along the interfaces of the ITD layers. Since the PTD, the hydroxyapatite tablets are not preferentially orientated; they are under less compressive residual stress, causing the microtubules to act as crack initiation sites. This manifests as cross-hatched shear microcracks forming at the microtubules in compression and as ring-shaped microcracks in tension. The tip of a larger crack creates a stress concentration that helps initiate microcracks around the microtubules ahead of it, consuming energy and resisting further damage. The imperfect linking of the microcrack to a larger crack also induces 'uncracked ligaments', which help arrest the larger crack. In comparison, enamel does not display the same fracture resistance, and fractures traveling across the DEJ are usually stopped within ~10 μm. The combination of the residual stress and the perpendicular orientation of the ITD mineralized collagen fibers significantly increases the
fracture toughness and
fatigue endurance limit along the microtubule direction. ==Types==