Electric potential energy

The electric potential energy of a system of point charges is defined as the work required to assemble this system of charges by bringing them close together, as in the system from an infinite distance. Alternatively, the electric potential energy of any given charge or system of charges is termed as the total work done by an external agent in bringing the charge or the system of charges from infinity to the present configuration without undergoing any acceleration. {{block indent|em=1.2|text=The electrostatic potential energy, UE, of one point charge q at position r in the presence of an electric field E is defined as the negative of the work W done by the electrostatic force to bring it from the reference position rref to that position r. U_\mathrm{E}(\mathbf r) = -W_{r_\text{ref} \to r } = -\int_{\mathbf{r}_\text{ref}}^\mathbf{r} q\mathbf{E}(\mathbf{r'}) \cdot \mathrm{d} \mathbf{r'} where E is the electrostatic field and dr' is the displacement vector in a curve from the reference position rref to the final position r.}} The electrostatic potential energy can also be defined from the electric potential as follows: {{block indent|em=1.2|text=The electrostatic potential energy, UE, of one point charge q at position r in the presence of an electric potential V is defined as the product of the charge and the electric potential. U_\mathrm{E}(\mathbf r) = qV(\mathbf r) where V is the electric potential generated by the charges, which is a function of position r.}} ==Units==

The SI unit of electric potential energy is joule (named after the English physicist James Prescott Joule). In the CGS system the erg is the unit of energy, being equal to 10−7 Joules. Also electronvolts may be used, 1 eV = 1.602×10−19 Joules. ==Electrostatic potential energy of one point charge==

One point charge q in the presence of another point charge Q The electrostatic potential energy, UE, of one point charge q at position r in the presence of a point charge Q, taking an infinite separation between the charges as the reference position, is: U_E(\mathbf r) = \frac{1}{4\pi \varepsilon_0} \frac{qQ}{r} where r is the distance between the point charges q and Q, and q and Q are the charges (not the absolute values of the charges—i.e., an electron would have a negative value of charge when placed in the formula). The following outline of proof states the derivation from the definition of electric potential energy and Coulomb's law to this formula. {{math proof The electrostatic force F acting on a charge q can be written in terms of the electric field E as \mathbf{F} = q\mathbf{E} , By definition, the change in electrostatic potential energy, UE, of a point charge q that has moved from the reference position rref to position r in the presence of an electric field E is the negative of the work done by the electrostatic force to bring it from the reference position rref to that position r. U_E(r) - U_E(r_{\rm ref}) = -W_{r_{\rm ref} \rightarrow r } = -\int_{{r}_{\rm ref}}^r q\mathbf{E} \cdot \mathrm{d} \mathbf{s} . where: • r = position in 3d space of the charge q, using cartesian coordinates r = (x, y, z), taking the position of the Q charge at r = (0,0,0), the scalar r = r is the norm of the position vector, • ds = differential displacement vector along a path C going from rref to r, • W_{r_\text{ref} \to r } is the work done by the electrostatic force to bring the charge from the reference position rref to r, Usually UE is set to zero when rref is infinity: U_E (r_{\rm ref}=\infty) = 0 so U_E(r) = - \int_\infty^r q\mathbf{E} \cdot \mathrm{d} \mathbf{s} When the curl is zero, the line integral above does not depend on the specific path C chosen but only on its endpoints. This happens in time-invariant electric fields. When talking about electrostatic potential energy, time-invariant electric fields are always assumed so, in this case, the electric field is conservative and Coulomb's law can be used. Using Coulomb's law, it is known that the electrostatic force F and the electric field E created by a discrete point charge Q are radially directed from Q. By the definition of the position vector r and the displacement vector s, it follows that r and s are also radially directed from Q. So, E and ds must be parallel: \mathbf{E} \cdot \mathrm{d} \mathbf{s} = \left|\mathbf{E}\right| \cdot \left|\mathrm{d}\mathbf{s}\right| \cos(0) = E \, \mathrm{d}s Using Coulomb's law, the electric field is given by \left|\mathbf{E}\right| = E = \frac{1}{4\pi\varepsilon_0}\frac{Q}{s^2} and the integral can be easily evaluated: U_E(r) = -\int_\infty^r q\mathbf{E} \cdot \mathrm{d} \mathbf{s} = -\int_\infty^r \frac{1}{4\pi\varepsilon_0}\frac{qQ}{s^2} \, \mathrm{d}s = \frac{1}{4\pi\varepsilon_0}\frac{qQ}{r} = k_e\frac{qQ}{r} }} One point charge q in the presence of n point charges Qi The electrostatic potential energy, UE, of one point charge q in the presence of n point charges Qi, taking an infinite separation between the charges as the reference position, is: U_E(r) = \frac{q}{4\pi\varepsilon_0} \sum_{i=1}^n \frac{Q_i}{r_i}, where ri is the distance between the point charges q and Qi, and q and Qi are the assigned values of the charges. ==Electrostatic potential energy stored in a system of point charges==

The electrostatic potential energy UE stored in a system of N charges q1, q2, …, qN at positions r1, r2, …, rN respectively, is: {{NumBlk||U_\mathrm{E} = \frac{1}{2} \sum_{i=1}^N q_i V(\mathbf{r}_i) = \frac{1}{2} k_e\sum_{i=1}^N q_i \sum_\stackrel{j=1}{j \ne i}^N \frac{q_j}{r_{ij}}, where, for each i value, V(ri) is the electrostatic potential due to all point charges except the one at ri, and is equal to: V(\mathbf{r}_i) = k_e\sum_\stackrel{j=1}{j \ne i}^N \frac{q_j}{r_{ij}}, where rij is the distance between qi and qj. {{math proof The electrostatic potential energy UE stored in a system of two charges is equal to the electrostatic potential energy of a charge in the electrostatic potential generated by the other. That is to say, if charge q1 generates an electrostatic potential V1, which is a function of position r, then U_\mathrm{E} = q_2 V_1(\mathbf r_2). Doing the same calculation with respect to the other charge, we obtain U_\mathrm{E} = q_1 V_2(\mathbf r_1). The electrostatic potential energy is mutually shared by q_1 and q_2, so the total stored energy is U_E = \frac{1}{2}\left[q_2 V_1(\mathbf r_2) + q_1 V_2(\mathbf r_1)\right] This can be generalized to say that the electrostatic potential energy UE stored in a system of n charges q1, q2, …, qn at positions r1, r2, …, rn respectively, is: U_\mathrm{E} = \frac{1}{2}\sum_{i=1}^n q_i V(\mathbf{r}_i). }} Energy stored in a system of one point charge The electrostatic potential energy of a system containing only one point charge is zero, as there are no other sources of electrostatic force against which an external agent must do work in moving the point charge from infinity to its final location. A common question arises concerning the interaction of a point charge with its own electrostatic potential. Since this interaction doesn't act to move the point charge itself, it doesn't contribute to the stored energy of the system. Energy stored in a system of two point charges Consider bringing a point charge, q, into its final position near a point charge, Q1. The electric potential V(r) due to Q1 is V(\mathbf r) = k_e \frac{Q_1}{r} Hence we obtain, the electrostatic potential energy of q in the potential of Q1 as U_E = \frac{1}{4\pi\varepsilon_0} \frac{q Q_1}{r_1} where r1 is the separation between the two point charges. Energy stored in a system of three point charges The electrostatic potential energy of a system of three charges should not be confused with the electrostatic potential energy of Q1 due to two charges Q2 and Q3, because the latter doesn't include the electrostatic potential energy of the system of the two charges Q2 and Q3. The electrostatic potential energy stored in the system of three charges is: U_\mathrm{E} = \frac{1}{4\pi\varepsilon_0} \left[ \frac{Q_1 Q_2}{r_{12}} + \frac{Q_1 Q_3}{r_{13}} + \frac{Q_2 Q_3}{r_{23}} \right] {{math proof Using the formula given in (), the electrostatic potential energy of the system of the three charges will then be: U_\mathrm{E} = \frac{1}{2} \left[ Q_1 V(\mathbf{r}_1) + Q_2 V(\mathbf{r}_2) + Q_3 V(\mathbf{r}_3) \right] Where V(\mathbf{r}_1) is the electric potential in r1 created by charges Q2 and Q3, V(\mathbf{r}_2) is the electric potential in r2 created by charges Q1 and Q3, and V(\mathbf{r}_3) is the electric potential in r3 created by charges Q1 and Q2. The potentials are: V(\mathbf{r}_1) = V_2(\mathbf{r}_1) + V_3(\mathbf{r}_1) = \frac{1}{4\pi\varepsilon_0} \frac{Q_2}{r_{12}} + \frac{1}{4\pi\varepsilon_0} \frac{Q_3}{r_{13}} V(\mathbf{r}_2) = V_1(\mathbf{r}_2) + V_3(\mathbf{r}_2) = \frac{1}{4\pi\varepsilon_0} \frac{Q_1}{r_{21}} + \frac{1}{4\pi\varepsilon_0} \frac{Q_3}{r_{23}} V(\mathbf{r}_3) = V_1(\mathbf{r}_3) + V_2(\mathbf{r}_3) = \frac{1}{4\pi\varepsilon_0} \frac{Q_1}{r_{31}} + \frac{1}{4\pi\varepsilon_0} \frac{Q_2}{r_{32}} Where rij is the distance between charge Qi and Qj. If we add everything: U_\mathrm{E} = \frac{1}{2} \frac{1}{4\pi\varepsilon_0} \left[ \frac{Q_1 Q_2}{r_{12}} + \frac{Q_1 Q_3}{r_{13}} + \frac{Q_2 Q_1}{r_{21}} + \frac{Q_2 Q_3}{r_{23}} + \frac{Q_3 Q_1}{r_{31}} + \frac{Q_3 Q_2}{r_{32}}\right] Finally, we get that the electrostatic potential energy stored in the system of three charges: U_\mathrm{E} = \frac{1}{4\pi\varepsilon_0} \left[ \frac{Q_1 Q_2}{r_{12}} + \frac{Q_1 Q_3}{r_{13}} + \frac{Q_2 Q_3}{r_{23}}\right] }} == Energy stored in an electrostatic field distribution in vacuum ==

The energy density, or energy per unit volume, \frac{dU}{dV}, of the electrostatic field of a continuous charge distribution is: u_e = \frac{dU}{dV} = \frac{1}{2} \varepsilon_0 \left|{\mathbf{E}}\right|^2. {{math proof One may take the equation for the electrostatic potential energy of a continuous charge distribution and put it in terms of the electrostatic field. Since Gauss's law for electrostatic field in differential form states \mathbf{\nabla}\cdot\mathbf{E} = \frac{\rho}{\varepsilon_0} where • \mathbf{E} is the electric field vector • \rho is the total charge density including dipole charges bound in a material • dV is a volume element • \Phi is the electric potential • \varepsilon_0 is the permittivity of free space, then, \begin{align} U & = \frac{1}{2}\int \limits_{\text{all space}} \rho(r) \Phi(r) \, dV \\ & = \frac{1}{2}\int \limits_{\text{all space}} \varepsilon_0(\mathbf{\nabla}\cdot{\mathbf{E}})\Phi \, dV \end{align} so, now using the following divergence vector identity \begin{align} \nabla\cdot(\mathbf{A}{B}) &= (\nabla\cdot\mathbf{A}){B} + \mathbf{A}\cdot(\nabla{B}) \\ \Rightarrow (\nabla\cdot\mathbf{A}){B} &= \nabla\cdot(\mathbf{A}{B}) - \mathbf{A}\cdot(\nabla{B}) \end{align} we have U = \frac{\varepsilon_0}{2}\int \limits_{\text{all space}} \mathbf{\nabla}\cdot(\mathbf{E}\Phi) dV - \frac{\varepsilon_0}{2}\int \limits_{\text{all space}} (\mathbf{\nabla}\Phi)\cdot\mathbf{E} dV using the divergence theorem and taking the area to be at infinity where \Phi(\infty) = 0, and using \nabla \Phi = -\mathbf{E} \begin{align} U & = \overbrace{\frac{\varepsilon_0}{2}\int\limits_{{}^\text{boundary}_\text{ of space}} \Phi\mathbf{E}\cdot d\mathbf A}^{0} - \frac{\varepsilon_0}{2}\int \limits_{\text{all space}} (-\mathbf{E})\cdot\mathbf{E} \, dV \\ & = \int \limits_{\text{all space}} \frac{1}{2}\varepsilon_0\left|{\mathbf{E}}\right|^2 \, dV. \end{align} So, the energy density, or energy per unit volume \frac{dU}{dV} of the electrostatic field is: u_e = \frac{1}{2} \varepsilon_0 \left|{\mathbf{E}}\right|^2. }} == Energy stored in electronic elements==

is UE= CV2 Some elements in a circuit can convert energy from one form to another. For example, a resistor converts electrical energy to heat. This is known as the Joule effect. A capacitor stores it in its electric field. The total electrostatic potential energy stored in a capacitor is given by U_E = \frac{1}{2}QV = \frac{1}{2} CV^2 = \frac{Q^2}{2C} where C is the capacitance, V is the electric potential difference, and Q the charge stored in the capacitor. {{math proof One may assemble charges to a capacitor in infinitesimal increments, dq \to 0, such that the amount of work done to assemble each increment to its final location may be expressed as W_q = V \, dq = \frac{q}{C}dq. The total work done to fully charge the capacitor in this way is then W = \int dW = \int_0^Q V \, dq = \frac{1}{C} \int_0^Q q \, dq = \frac{Q^2}{2C}. where Q is the total charge on the capacitor. This work is stored as electrostatic potential energy, hence, W = U_E = \frac{Q^2}{2C}. Notably, this expression is only valid if dq \to 0, which holds for many-charge systems such as large capacitors having metallic electrodes. For few-charge systems the discrete nature of charge is important. The total energy stored in a few-charge capacitor is U_E = \frac{Q^2}{2C} which is obtained by a method of charge assembly utilizing the smallest physical charge increment \Delta q = e where e is the elementary unit of charge and Q = Ne where N is the total number of charges in the capacitor. }} The total electrostatic potential energy may also be expressed in terms of the electric field in the form U_E = \frac{1}{2} \int_V \mathbf{E} \cdot \mathbf{D} \, dV where \mathrm{D} is the electric displacement field within a dielectric material and integration is over the entire volume of the dielectric. The total electrostatic potential energy stored within a charged dielectric may also be expressed in terms of a continuous volume charge, \rho, U_E = \frac{1}{2} \int_V \rho \Phi \, dV where integration is over the entire volume of the dielectric. ==Notes==