Materials and techniques The use of
gilt-bronze to make luxury goods could be argued to have reached its peak at the beginning of the 19th century in France. This medium was not new, as it had enjoyed international reputation in Europe since the reign of
Louis XIV that continued during the entire
ancien régime. One reason for this success is the technical qualities inherent in bronze. Cheaper than gold and silver, it is a common material that is easy to mold and
gild. For this reason, it became the favorite material for clock cases, candelabra and furniture ornaments. Thanks to the skill of remarkable bronze casters and chasers these objects were not merely timekeepers, but became
objets d'art. This golden age ended in the late 1820s, when the generation of craftsmen and laborers died out, The founders usually made a wax model from a draft and from this wax model a negative plaster cast was made, which could be reproduced more often. Then using this plaster cast a mould was made, in which the bronze was cast. By combining figures and mountings several versions of one design were produced. fumes. Due to exposure to harmful
mercury fumes during the
"dorure au mercure" (
fire-gilding) process, most gilders did not survive beyond 40 years of age as a consequence of
mercury poisoning. Even in those days, they took all kind of precautions against mercury poisoning. These measures included chewing bread, or placing a piece of leather with an embedded silver coin over the tongue (the silver coin would change color when exposed to mercury). There was also a kind of mask devised to inhale the air from behind the head. None of these measures were sufficient counter-measures against mercury poisoning. Consequently the use of mercury was outlawed by French legislation after around 1830, although its use continued commonly until circa 1900 and it even was still in use in a very few workshops around 1960. To replace ormolu, other gilding techniques (like
electroplating from the mid-19th century on) were utilized instead. Regarding the mechanism, towards the end of the 18th century, round clock movements became a reliable mass-produced product. Known as
"Pendule de Paris" (Paris, or French, clock movements), they were an 8-day movement with anchor escapement, silk thread suspended pendulum with a count wheel striking on a bell every hour and half-hour. By the 1840s the simple and very effective silk suspension was being replaced by various adjustable spring suspension systems. It is necessary to emphasize that unlike the clocks built in the 18th century, where the majority of them were signed, the authorship in many of the Empire ones remain anonymous, making it difficult to attribute one particular work to a certain bronze sculptor. To this must be added that it was a common practice among bronziers selling pieces to each other and even to copy or readapt others' designs. When signed, they usually bear the name on the dial and could be the bronzier's name as well as the retailer's name or the movement maker. A small clock, usually covered by a glass bell, could cost 150
francs and 7.000 francs for the biggest works intended to decorate the halls of palaces and big houses. The total price comprised the work of the different people involved in its manufacturing process: • About 10% for the model design. • Casting, 20%. • Chiseling, 30%. • Gilding, 30%. • The movement only represented between 5 and 10%. This meant that about 90% of the production costs were the sculpture and the case making.
Style and design in full military dress.
Metropolitan Museum of Art. The clocks were manufactured following the style then in vogue, the
Empire style, a phase within the Neoclassical scope, based on the classical antiquity art; both the ancient Greece and specially the Roman Empire. Although there were a great diversity of case shapes, the most common and popular ones were the clocks with a rectangular or oblong base sustained by four (or more) legs of different forms and patterns. The
pedestal front was normally decorated with either garlands, acanthus tendrils, acroterions, laurel wreaths, scrolls, flowers and other classical decorative motifs, or depicting finely chased mythological and allegoric scenes in relief as a
frieze of a Greek-Roman temple. On top of the base (in the center or to one side) sat the plinth that accommodated the clock dial, however in other models it was also placed in cart wheels, rocks, shields, globes, tree trunks, etc. These timekeepers were embellished with fine bronze figures of art, sciences, and high ideals allegories, gods, goddesses, muses, cupids, classical literary heroes and other allegorical or mythological compositions. Sometimes historical personages such as
Alexander the Great,
Julius Caesar,
George Washington,
Napoleon Bonaparte, philosophers and classical authors, were the main theme as well. Hence they are also known as figural or sculptural clocks (rather than architectural).
Galatea,
Catherine Palace. The respective allegoric composition in relief of the frieze, represents the
"Triumph of Galatea", based on the homonymous
fresco by
Rafael Sanzio. Likewise, another of the sculptor's source of inspiration for the composition of a certain design were both
classical sculptures and celebrated paintings. Examples of the first one include the
Sleeping Ariadne and
Psyche Revived by Cupid's Kiss by
Antonio Canova or Psyche crowning Amor after a model by Claude Michallon. In painting can be quoted the
Oath of the Horatii by
Jacques-Louis David, Héro et Léandre by Pierre-Claude-François Delorme, etc. The classical gods served as models and symbols for the era. For instance, the
chariot clocks or "
pendules au char" were an exceptional category within the Empire clocks. Apollo, Diana and Cupid depicted as triumphant chariot drivers, were the most popular gods used. It was habitual during the Napoleonic times and particularly under the
"Directoire" and
"Consulat" regimes that clocks glorify the conduct of warfare. More domestic and romantic subjects, like the "temple of love", gained popularity after the downfall of the Napoleon's Empire. During the Restoration (1815–1830) the representation of warfare scenes was not as common as in the early Empire. Finally, under the reign of
Charles X (1824–1830), the case designs started gradually to develop away from a proportionate and strict
classicism towards a baroque style which announced the
eclecticism and
historicisms in forms, so typical, on the other side, of the rest of the 19th century. That's why during the second half of that century and early 20th, among all of the different revival styles of mantel clocks available; Rococo, Louis XVI, etc., timepieces in the Empire style were made as well, normally they were replicas or adaptations based on preexisting models. Empire clocks in general and the largest and most notable examples in particular from the top bronziers, such as
Pierre-Philippe Thomire, Claude Galle,
André-Antoine Ravrio, Louis-Stanislas Lenoir-Ravrio, etc., are considered more than just clocks. They are
works of art as well, sculptural études, where the balance in composition and the study of objects, animals and the human bodies forms and expressions are carefully and meticulously reflected in the bronze figures, achieving a high degree of realism, perfectionism and delicacy. These timepieces were devised to decorate the console tables or mantelpieces of a given hall or room in
palaces, European and American
mansions, houses, offices, etc. Today many of them are part of royal collections and can be seen in palaces, official residences, embassies, ministries, museums all over the world, etc. Even nowadays a few companies replicate this style, proving that the attention to detail, exquisite taste, superb workmanship, elegance and refinement achieved by the different artists and craftsmen involved in its manufacturing, are everlasting and timeless alike. ==Bronziers==