GE Evolution Series

Six different Evolution Series models (seven including rebuilds) have been produced for the North American market. They are all six-axle locomotives and have AAR wheel arrangement C-C (UIC classification Co′Co′), except for the ES44C4 and ET44C4 which uses the AAR A1A-A1A wheel arrangement and the meter-gauge version developed for the Brazilian network ES43BBi which is AAR B-B-B-B. ES40DC (2004–2008) The ES40DC (Evolution Series, 4,000 hp, DC traction) replaced the Dash 9-40CW model in the General Electric catalogue and, like the former model, was delivered exclusively to Norfolk Southern Railway. ES44DCs owned by CSX Transportation were also given this designation in 2009 after being de-rated to . However, high-horsepower demand on Norfolk Southern made a mandatory repowering of several ES40DC engines into their former ES44DC power. ES44DC (2005–2010) The ES44DC (Evolution Series, 4,400 hp, DC traction) replaced the Dash 9-44CW model in the General Electric catalogue. Primary users are BNSF Railway, CSX Transportation, and Canadian National Railway. Pilbara Iron in Australia ordered a lengthened, international version designated ES44DCi. The extra length is used for a larger radiator to increase cooling capacity in the Australian outback. ES44AC (2003–present) ES44AC No. 2869 The ES44AC (Evolution Series, 4,400 hp, AC traction) replaced the AC4400CW model in the General Electric catalogue. These locomotives have been ordered by every Class I railroad in North America: Union Pacific Railroad (who refers to these locomotives as the C45ACCTE), BNSF Railway, CSX Transportation, Norfolk Southern Railway, Ferromex, CPKC Railway, and Canadian National Railway. Union Pacific also bought the heavy ballasted variation of this model, the ES44AH, and refers to it as the C45AH. UP also uses this designation to refer to their ET44AH units. CSX Transportation has bought these locomotives and they were always heavy ballasted, so they called these the ES44AH. The first set was 700–999, which was built from 2007–2011. Beginning 2023, CSX has repainted and renumbered the 3000 series locomotives to heritage units. The first heritage, 1827, was painted into Baltimore & Ohio and renumbered from 3059 on May 11, 2023. BNSF Railway purchased 25 ES44AC locomotives in 2023, and they are all classified as ES44ACH. They were built between August and September 2023 and were built concurrently with the ET44ACH. The numbers were 3282–3306, which officially ended the production of the ES44C4 in 2020. These units are Tier 4 credit units. In 2024, BNSF has bought 25 more ES44ACH locomotives, which are numbered from 3307–3331. These locomotives weigh 436,320 lbs. ES44C4 (2009–2020) ES44C4 No. 8013The ES44C4 (Evolution Series, 4,400 hp, C to denote 3 axles per truck, 4 traction motors) was introduced in 2009. While similar to the ES44AC, the ES44C4 has two traction motors per truck, instead of the conventional three such as on the ES44AC. No ES44C4s with DC traction were built. The center axle of each truck is unpowered, giving an A1A-A1A wheel arrangement. BNSF Railway is the launch customer for this model, ordering an initial batch of 25 units numbered 6600–6624. The ES44C4 was initially only built for BNSF. The units 3250–3281, the 4200s, 5533–5546, 7921–7999, and units 8318–8399 are certified as Tier 4 Credit units, while the others are Tier 2 or Tier 3. On 30 January 2014 Florida East Coast Railway announced that they would buy 24 ES44C4s, to be numbered 800–823, for heavy haul service and intermodal traffic. All were delivered by the end of 2014, in order to beat the EPA's deadline on exhaust-emissions standards for new-built Tier 3 locomotives. A feature of these units is a variable traction control system in their computer systems. One of the differences between an ES44AC and an ES44C4 is the air cylinders and linkages on the truck sideframes of the ES44C4; these are part of the traction control system. Every time a variation in grade, traction, or wheel slip occurs, the computer adjusts the pressure in these cylinders to maintain sufficient adhesion, by varying the weight on the drive axles. ES44DCi/ES44ACi The ES44DCi (Evolution Series, 4400 horsepower, DC traction, international version) was built for the Rio Tinto railway in Australia. The ES44ACi was built for the Roy Hill and Rio Tinto Group. The ES44ACi/DCi is essentially an ES44AC/DC in a GE AC6000CW's body, with the radiator at the end protruding out over the rear deck in the same way the AC6000CW does. The locomotive's large radiator allows it to handle the Australian outback's extreme temperatures. Roy Hill has ordered 21 ES44ACi locomotives, and is in possession of all 21 locomotives (numbered 1001 "Ginny"-1021). Rio Tinto ordered 100 ES44DCi locomotives and has all 100 (numbered 8100–8199) and 21 ES44ACi locomotives (numbered 9100–9120) and more are on order. Rio Tinto's units can be remotely driven, meaning nobody has to be in the cab as they can be controlled from a control center. Ferromex also acquired 50 ES44ACi. As the construction of these locomotives was subsequent to the new environmental laws of the US, GE cataloged them only as ES44ACi, although in the external technical specifications of the locomotives say ES44AC). These locomotives can no longer reenter the US operating. In Brazil, the Rumo, Suzano and MRS Logística railways purchased 25 units, manufactured at Wabtec of Brazil with broad-gauge trucks. ET44AC/ET44C4 (2012–present) The ET44AC (Evolution Series Tier 4, 4,400 hp, AC traction) replaces the ES44AC model. These locomotives have been ordered by every US and Canadian Class I railroad, including BNSF Railway, Canadian National Railway, CPKC, CSX Transportation, Norfolk Southern, and Union Pacific. BNSF also ordered similar ET44C4 locomotives, which have a dynamic weight management system instead of a traction motor on the middle axle of each truck. UP and CSX designate their ET44ACs as ET44AH although UP calls these C45AH, and BNSF calling them ET44ACH as their locomotives are ballasted to 436,320 lbs. ET23DCM (2023–present) The ET23DCM (Evolution Series Tier 4, 2350 hp, DC traction), sometimes called the SD23T4, is a modernized locomotive using EMD's SD40-2 platform and the Wabtec Inline 6-cylinder Tier 4 diesel engine. CSX Transportation ordered 15 of these locomotives, with most being built at their Huntington Heavy Repair Shop. Wabtec also built one locomotive as a demonstrator from ex-NS SD40-2 3259. TE33A The TE33A is an export 1520 mm gauge locomotive in the GE Evolution Series. 3TE25K2M The 3TE25K2M is an export 1520mm gauge locomotive in the GE Evolution Series for Russian Railways. ES40ACi (2008–2010) The ES40ACi (Evolution Series, 4,250 hp, AC traction) was the first GEVO locomotive that was made for the Egyptian National Railways featuring a full-width car body and double cabin. The locomotive weighs 140 metric tons (312,000 lbs) and reaches maximum speed of 121 km/h (75 mph). 80 units were produced, and are used in both passenger and freight trains. ES30ACi (2018–2022) The ES30ACi (Evolution Series, 3300–4250 hp, AC Traction), was built for a total of 100 units. The locomotive weighs 135 metric tons (301,000 lbs) and the maximum speed is 121 km/h (75 mph). If Computer Controlled, it extends to 140 km/h (86 mph). ES44ACM (2026–present) The ES44ACM (Evolution Series, 4400 hp, AC traction, modernized), is a rebuilt locomotive using the cores from former ES44DC units. This is a DC to AC conversion locomotive similar to the AC44C6M locomotives. Norfolk Southern is the only owner to rebuild these by Wabtec. == Identifying features ==

The Evolution Series locomotives are visually similar to the AC4400CW and GE Dash 9 Series, although small differences are evident. The most noticeable difference is the radiator section at the rear of the locomotive is larger to accommodate the GEVO's air-to-air intercoolers. As with the AC6000CW, the radiators project beyond the end of the hood. On the ES44ACi and ES44DCi models, the radiator extends in the same way as the AC6000CW, protruding out over the rear deck. For the other Evolution Series locomotives, the radiator does not protrude completely over the rear deck, but rather sits nearly flush with the rear of the engine hood. Unlike previous GE locomotives, the grills under the radiator are at two different angles. The increase in radiator size is due to the necessity for greater cooling capacity in the locomotive in order to reduce emissions. The other major difference between the Evolution Series and earlier models is the vents below the radiators, which are larger than those on previous GE locomotives. Also, all Evolution Series units have air conditioners mounted below the cab on the conductor's side. == Operators ==

Australia In 2002, GE and UGL launched the Evolution Series locomotive, and in 2009, continued their partnership for another 10 years for UGL to distribute and sell GE locomotives in Australia. The locomotives are Pacific National 94-class and designated as C44ESACi. India In November 2015, it was announced Indian Railways and GE would engage in a 11-year joint venture in which GE would hold a majority stake of 74%, to provide a mix of 1,000 diesel locomotives of type ES43ACmi which are 4,500 horsepower and type ES57ACi which are 6,000 horsepower each. Indian Railways designated these 1,676 mm (broad gauge) locomotives as the WDG-4G class and WDG-6G class respectively. General Electric has invested ₹2,052 crore (US$305 million) for its construction. In the $2.6 Billion deal, Indian Railways would purchase 1,000 goods locomotives a year for ten years beginning in 2017; the locomotives would be modified versions of the GE Evolution series.Diesel Locomotive Factory, Marhowrah was built by GE for the manufacture of the locomotives.[http://www.business-standard.com/article/economy-policy/rail-ministry-awards-rs-14-656-cr-marhowra-locomotive-project-to-ge-115110900795_1.html South Africa Transnet Engineering in South Africa has a license to manufacture 233 ES40ACi locomotives for Transnet Freight Rail, with core components including GEVO-12 engines supplied from the United States. The first six of these Class 44-000 locomotives were built in Erie, Pennsylvania, in April and July 2015. In October 2015, the first of the 227 South African-built locomotives was nearing completion at Transnet Engineering's Koedoespoort shops in Pretoria. ==See also==