Holden Commodore (VR)

Launched in July 1993 and sold until April 1995, the VR series came with an updated, sleeker and more modern design, as well as safety enhancements such as anti-lock brakes (ABS). It launched shortly before the Ford ED Falcon. From the side, the biggest change was the revised daylight opening around the C-pillar and the use of a round rear wheelarch, instead of a squared-off shape used on the previous VN and VP model Commodores. A Series II model launched in September 1994. The VR Acclaim and Calais included a driver's side Supplemental Restraint System (SRS) airbag as standard, which was a first for an Australian car. They also had standard ABS brakes and independent rear suspension (IRS). The airbag, ABS brakes and IRS were also available across the range for both automatic transmission and manual transmission models. The rear-end treatment saw raised tail lamps, which were recessed high up on the boot lid for safety reasons. A new electronic version of the Turbo-Hydramatic 700R4 (TH700) automatic transmission was introduced, known as the GM 4L60-E. The VR Commodore was Wheels Car of the Year for 1993. ==Models==

Commodore Executive Commodore Executive opened up the VR lineup, although it was primarily projected at fleet customers. Power steering, electric side mirrors and four-wheel disc brakes were standard, with automatic transmission optional. Only one limited-edition model was offered in the VR range: • Commodore Equipe: introduced in 1995, a Series II model in either sedan or wagon bodies was based on the Executive. Commodore Acclaim With the introduction of the VR Commodore, Holden added the Acclaim model to the Commodore range. Sitting one notch above the Executive, the Acclaim was based on an automatic transmission Executive with a safety pack that was aimed at families and featured ABS brakes, IRS, driver's side airbag and cruise control as standard. Although the Acclaim came standard with automatic transmission, a buyer could, by taking an Executive with manual transmission, and adding the ABS brakes, IRS, and airbag options, have a Commodore that was almost a manual transmission Acclaim. Only cruise control was not available as an option. Commodore S The Commodore S was a sports option based on the Executive, retaining its 3.8-litre engine. Commodore SS SS models were similar to the S, except that they were fitted with Holden's 5.0-litre HEC 5000i V8. A unique-to-SS alloy wheel design was also featured. A engine was offered as an option. Berlina The Berlina was the first of the luxury-oriented variants. Alloy wheels, electric windows and automatic transmission were standard fitment. Sedan and wagon variants were offered. Calais The Calais topped the VR lineup with an automatic transmission, driver's airbag, IRS, and ABS as standard, as well as features, such as climate control and velour trim or optional leather, to differentiate it from the lesser Commodore models. File:1994-1995 Holden VR II Commodore Executive station wagon 05.jpg | Commodore Executive wagon (Series II) File:1994 Holden VR Commodore Acclaim.jpg | 1994 Holden Commodore (VR) Acclaim sedan File:1995 Holden VR II Commodore Equipe sedan 03.jpg | Commodore Equipe sedan (Series II, limited edition) File:Holden Commodore SS (1993-1994 VR series) 01.jpg | Commodore SS File:1994 Holden Berlina (VR) sedan (2008-10-09).jpg|Holden Commodore Berlina sedan (VR) File:Holden Calais (1993-1994 VR series) 02.jpg | Holden Calais ==Holden Ute==

A coupe utility variant of the VR Commodore was offered in Holden Ute and the Holden 'S’ Ute models. Unlike the Ute which carried no external model badging, the 'S’ Ute was fitted with "Commodore" badges. File:1995 Holden Commodore (VR II) S utility (2011-11-08).jpg | Holden Ute S (Series II) File:1993-1994 Holden VR Commodore S utility 02.jpg | Holden Ute S ==Holden Statesman and Caprice (VR)==

Holden also produced longer wheelbase variants of the Commodore VR as the Holden Statesman (VR) and the Holden Caprice (VR). == HSV range ==

Holden's performance vehicle partner Holden Special Vehicles produced the following range of Holden VR based models, which were each marketed under the HSV brand. Clubsport The VR series Clubsport, which was based on the Holden Commodore (VR), was released in August 1993. It was powered by a 185 kW 5.0-litre V8 engine. Senator In 1993, the significantly redesigned VR Senator was released. The rear seating was from the Holden Statesman. Along with the rest of the HSV range, the Senator bodykit was penned by designer Ian Callum to produce a sleeker, more aggressive stance along with a version of the 5.0-litre V8. A new suspension setup was developed, known as the touring package which aimed to provide capable handling and a smooth ride. Additionally from May 1994 onwards, the Senator could be optioned with HSV's new 5.7-litre "stroker" V8 known as the "215i". The "stroker" engine option was handbuilt as an upgrade over the standard V8. This engine could be coupled to either the four-speed automatic transmission or a six-speed manual transmission. 0–100 km/h (0-60 mph) takes 7.8 sec for the 185i and takes 7.3 sec for the 215i. Total number built for both versions was 855. ==Toyota Lexcen (T3)==

(T3) CSi wagon (T3) Newport sedan (T3) CSi sedan The United Australian Automobile Industries (UAAI) joint venture agreement with Toyota Australia first starting with the VN Commodore continued with the VP and VR. The VR Lexcen equivalent was known as the T3 series, and was introduced at or about the same time as the other VR models; featuring subtle styling differences, particularly, the front panels. While the VR badged as a Holden was either first or second in the monthly Australian automotive sales, the Toyota Lexcen sold substantially fewer, as there was an interpretation of the Toyota Lexcen as Japan returning to its copycat roots. This was due to Toyota specifying styling that was in common with the then new "wide body" Camry, while retaining the original Commodore bodywork and interiors. Lexcen sales were still quite low, also another factor in this is Holden restricted Toyota in the number of Lexcens it was to provide to them. The number of technical service bulletins, recalls and customer service exercises on Holden-supplied Lexcens exceeds typical Toyota exercises on Toyota built vehicles in the era by more than five to one. ==References==