Isotopes of tin

Tin-117m is a radioisotope of tin. One of its uses is in a particulate suspension to treat canine synovitis (radiosynoviorthesis). == Tin-121m==

Tin-121m (121mSn) is a nuclear isomer of tin with a half-life of 43.9 years, making it technically a medium-lived fission product. In a normal thermal reactor, it has a very low fission product yield; thus, this isotope is not a significant contributor to nuclear waste. Fast fission or fission of some heavier actinides will produce it at higher yields. For example, its yield from uranium-235 is 0.0007% per thermal fission and 0.002% per fast fission. ==Tin-126==

Tin-126 is a radioisotope of tin and one of the only seven long-lived fission products. While tin-126's half-life of 230,000 years means a relatively low specific activity, its short-lived decay products, two isomers of antimony-126, emit a cascade of hard gamma radiation - at least 3 photons above 400 keV per decay - before reaching stable tellurium-126, making it a possible external exposure hazard, which the other long-lived fission products are not by comparison. Tin-126 is in the middle of the mass range for fission products, so its yield is fairly low (but still dominates that for the element tin). Fission of the common fuels such as 235U and 239Pu into unequal halves is preferred, especially with thermal neutrons, as used in almost all current nuclear power plants. • ANL factsheet == See also ==