• ISO 13006:2012 Ceramic tiles – Definitions, classification, characteristics and marking • ISO 13007 Ceramic tiles – Grouts and adhesives • ISO 13007-1:2014 Terms, definitions and specifications for adhesives • ISO 13007-2:2010 Test methods for adhesives • ISO 13007-3:2010 Terms, definitions and specifications for grouts • ISO 13007-4:2013 Test methods for grouts • ISO 13008:2012 Information and documentation - Digital records conversion and migration process • ISO 13009:2015 Tourism and related services – Requirements and recommendations for beach operation • ISO/TR 13014:2012 Nanotechnologies – Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment • ISO/TR 13028:2010 Information and documentation - Implementation guidelines for digitization of records • ISO 13053 Quantitative methods in process improvement -
Lean and
Six Sigma •
ISO 13053-1:2011 Part 1: DMAIC methodology •
ISO 13053-2:2011 Part 2: Tools and techniques • ISO/TR 13054:2012 Knowledge management of health information standards • ISO/TR 13062:2015 Electric mopeds and motorcycles – Terminology and classification • ISO/IEC 13066 Information technology - Interoperability with
assistive technology (AT) • ISO/IEC 13066-1:2011 Part 1: Requirements and recommendations for interoperability • ISO/IEC TR 13066-2:2016 Part 2: Windows accessibility application programming interface (API) • ISO/IEC TR 13066-3:2012 Part 3:
IAccessible2 accessibility application programming interface (API) • ISO/IEC TR 13066-4:2015 Part 4: Linux/UNIX graphical environments accessibility API • ISO/IEC TR 13066-6:2014 Part 6: Java accessibility application programming interface (API) • ISO 13078 Dentistry - Dental furnace • ISO 13078-2:2016 Part 2: Test method for evaluation of furnace programme via firing glaze • ISO 13102:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment: Electronic digital-indicator gauge – Design and metrological characteristics • ISO 13105 Building construction machinery and equipment – Machinery for concrete surface floating and finishing • ISO 13105-1:2014 Part 1: Terms and commercial specifications • ISO 13111 Intelligent transport systems (ITS) – The use of personal ITS station to support ITS service provision for travellers • ISO 13111-1:2017 Part 1: General information and use case definitions • ISO 13119:2012 Health informatics – Clinical knowledge resources – Metadata • ISO 13120:2013 Health informatics – Syntax to represent the content of healthcare classification systems – Classification Markup Language (ClaML) •
ISO/TR 13121:2011 Nanotechnologies – Nanomaterial risk evaluation • ISO 13127:2012 Packaging - Child resistant packaging - Mechanical test methods for reclosable child resistant packaging systems • ISO/TR 13128:2012 Health Informatics – Clinical document registry federation • ISO/TS 13131:2014 Health informatics – Telehealth services – Quality planning guidelines • ISO/TS 13136:2012 Microbiology of food and animal feed – Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens – Horizontal method for the detection of
Shiga toxin-producing Escherichia coli (STEC) and the determination of
O157, O111, O26, O103 and O145 serogroups • ISO 13140 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 13141 • ISO 13140-1:2016 Part 1: Test suite structure and test purposes • ISO 13140-2:2016 Part 2: Abstract test suite • ISO 13141:2015 Electronic fee collection – Localisation augmentation communication for autonomous systems • ISO 13142:2015 Electro-optical systems – Cavity ring-down technique for high-reflectance measurement • ISO 13143 Electronic fee collection – Evaluation of on-board and roadside equipment for conformity to ISO 12813 • ISO 13143-1:2016 Part 1: Test suite structure and test purposes • ISO 13143-2:2016 Part 2: Abstract test suite • ISO/TR 13154:2017 Medical electrical equipment – Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph • ISO/IEC 13156:2011 Information technology – Telecommunications and information exchange between systems – High rate 60 GHz PHY, MAC and PALs • ISO/IEC 13157 Information technology – Telecommunications and information exchange between systems – NFC Security • ISO/IEC 13157-1:2014 Part 1: NFC-SEC NFCIP-1 security services and protocol • ISO/IEC 13157-2:2016 Part 2: NFC-SEC cryptography standard using ECDH and AES • ISO/IEC 13157-3:2016 Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM • ISO/IEC 13157-4:2016 Part 4: NFC-SEC entity authentication and key agreement using asymmetric cryptography • ISO/IEC 13157-5:2016 Part 5: NFC-SEC entity authentication and key agreement using symmetric cryptography • ISO 13160:2012 Water quality -
Strontium 90 and
strontium 89 - Test methods using liquid scintillation counting or proportional counting • ISO 13161:2011 Water quality - Measurement of
polonium 210 activity concentration in water by alpha spectrometry • ISO 13162:2011 Water quality - Determination of
carbon 14 activity - Liquid scintillation counting method • ISO 13163:2013 Water quality -
Lead-210 - Test method using liquid scintillation counting • ISO 13164 Water quality - Radon-222 • ISO 13164-1:2013 Part 1: General principles • ISO 13164-2:2013 Part 2: Test method using gamma-ray spectrometry • ISO 13164-3:2013 Part 3: Test method using emanometry • ISO 13164-4:2015 Part 4: Test method using two-phase liquid scintillation counting • ISO 13165 Water quality -
Radium-226 • ISO 13165-1:2013 Part 1: Test method using liquid scintillation counting • ISO 13165-2:2014 Part 2: Test method using emanometry • ISO 13165-3:2016 Part 3: Test method using coprecipitation and gamma-spectrometry • ISO 13167:2015 Water quality -
Plutonium,
americium,
curium and
neptunium - Test method using alpha spectrometry • ISO/IEC 13170:2009 Information technology - 120 mm (8.54 GB per side) and 80 mm (2.66 GB per side) DVD re-recordable disk for dual layer (DVD-RW for DL) • ISO 13175 Implants for surgery – Calcium phosphates • ISO 13175-3:2012 Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes • ISO 13179 Implants for surgery – Plasma-sprayed unalloyed titanium coatings on metallic surgical implants • ISO 13179-1:2014 Part 1: General requirements • ISO 13183:2012 Intelligent transport systems – Communications access for land mobiles (CALM) – Using broadcast communications • ISO 13184 Intelligent transport systems (ITS) – Guidance protocol via personal ITS station for advisory safety systems • ISO/TR 13184-1:2013 Part 1: General information and use case definitions • ISO 13184-2:2016 Part 2: Road guidance protocol (RGP) requirements and specification • ISO 13185 Intelligent transport systems – Vehicle interface for provisioning and support of ITS services • ISO/TR 13185-1:2012 Part 1: General information and use case definition • ISO 13185-2:2015 Part 2: Unified gateway protocol (UGP) requirements and specification for vehicle ITS station gateway (V-ITS-SG) interface • ISO/IEC 13187:2011 Information technology - Server management command line protocol (SM CLP) specification • ISO/TR 13195:2015 Selected illustrations of response surface method - Central composite design • ISO 13200:1995 Cranes - Safety signs and hazard pictorials - General principles • ISO 13203:2005 Chains, sprockets and accessories - List of equivalent terms • ISO/IEC 13210:1999 Information technology - Requirements and Guidelines for Test Methods Specifications and Test Method Implementations for Measuring Conformance to POSIX Standards •
ISO/IEC 13211 Information technology - Programming languages -
Prolog •
ISO/IEC 13211-1:1995 Part 1: General core •
ISO/IEC 13211-2:2000 Part 2: Modules • ISO 13212:2014 Ophthalmic optics – Contact lens care products – Guidelines for determination of shelf-life • ISO/IEC 13213:1994 Information technology - Microprocessor systems -
Control and Status Registers (CSR) Architecture for microcomputer buses • ISO 13225:2012 Geometrical product specifications (GPS) – Dimensional measuring equipment; Height gauges – Design and metrological characteristics • ISO/IEC TR 13233:1995 Information technology - Interpretation of accreditation requirements in ISO/IEC Guide 25 - Accreditation of Information Technology and Telecommunications testing laboratories for software and protocol testing services • ISO/IEC 13235 Information technology - Open Distributed Processing - Trading function • ISO/IEC 13235-1:1998 Specification • ISO/IEC 13235-3:1998 Part 3: Provision of Trading Function using OSI Directory service • ISO/IEC 13236:1998 Information technology - Quality of service: Framework • ISO/IEC 13238 Information technology – Data Management • ISO/IEC 13238-3:1998 Part 3: IRDS export/import facility •
ISO/IEC 13239:2002 Information technology – Telecommunications and information exchange between systems –
High-level data link control (HDLC) procedures • ISO/IEC 13240:2001 Information technology - Document description and processing languages - Interchange Standard for Multimedia Interactive Documents (ISMID) • ISO/IEC 13241:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Route Restriction Class additional network feature • ISO/IEC 13242:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Route Restriction Class additional network feature • ISO/IEC 13244:1998 Information technology - Open Distributed Management Architecture • ISO/IEC 13246:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Signalling ATM adaptation layer • ISO/IEC 13247:1997 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Basic call/connection control •
ISO/IEC 13249 Information technology – Database languages –
SQL multimedia and application • ISO/IEC 13249-1:2016 Part 1: Framework • ISO/IEC 13249-2:2003 Part 2: Full-Text • ISO/IEC 13249-3:2016 Part 3: Spatial • ISO/IEC 13249-5:2003 Part 5: Still image • ISO/IEC 13249-6:2006 Part 6: Data mining • ISO/IEC TS 13249-7:2013 Part 7: History •
ISO/IEC 13250 Information technology –
Topic Maps • ISO/IEC 13251:2004 Collection of graphical symbols for office equipment • ISO/IEC 13252:1999 Information technology – Enhanced communications transport service definition • ISO 13261 Sound power rating of air-conditioning and
air source heat pump equipment • ISO 13261-1:1998 Part 1: Non-ducted outdoor equipment • ISO 13261-2:1998 Part 2: Non-ducted indoor equipment • ISO 13274:2013 Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs • ISO/TS 13278:2011 Nanotechnologies – Determination of elemental impurities in samples of carbon nanotubes using inductively coupled plasma mass spectrometry • ISO 13289:2011 Recreational diving services – Requirements for the conduct of snorkelling excursions • ISO 13293:2012 Recreational diving services – Requirements for gas blender training programmes • ISO 13300 Sensory analysis – General guidance for the staff of a sensory evaluation laboratory • ISO 13300-1:2006 Part 1: Staff responsibilities • ISO 13300-2:2006 Part 2: Recruitment and training of panel leaders • ISO 13304 Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation • ISO 13304-1:2013 Part 1: General principles • ISO 13307:2013 Microbiology of food and animal feed – Primary production stage – Sampling techniques •
ISO 13320:2009 Particle size analysis - Laser diffraction methods • ISO 13325:2003 Tyres – Coast-by methods for measurement of tyre-to-road sound emission • ISO/TR 13329:2012 Nanomaterials – Preparation of material safety data sheet (MSDS) • ISO 13332:2000 Reciprocating internal combustion engines – Test code for the measurement of structure-borne noise emitted from high-speed and medium-speed reciprocating internal combustion engines measured at the engine feet •
ISO/IEC 13346 Information technology – Volume and file structure of write-once and rewritable media using non-sequential recording for information interchange • ISO/IEC 13346-1:1995 Part 1: General • ISO/IEC 13346-2:1999 Part 2: Volume and boot block recognition • ISO/IEC 13346-3:1999 Part 3: Volume structure • ISO/IEC 13346-4:1999 Part 4: File structure • ISO/IEC 13346-5:1995 Part 5: Record structure • ISO 13347 Industrial fans – Determination of fan sound power levels under standardized laboratory conditions • ISO 13347-1:2004 Part 1: General overview • ISO 13347-2:2004 Part 2: Reverberant room method • ISO 13347-3:2004 Part 3: Enveloping surface methods • ISO 13347-4:2004 Part 4: Sound intensity method • ISO 13349:2010 Fans - Vocabulary and definitions of categories • ISO 13356:2015 Implants for surgery – Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) •
ISO 13370 Thermal performance of buildings – Heat transfer via the ground – Calculation methods • ISO 13372:2012 Condition monitoring and diagnostics of machines - Vocabulary • ISO 13373 Condition monitoring and diagnostics of machines – Vibration condition monitoring • ISO 13373-1:2002 Part 1: General procedures • ISO 13373-2:2016 Part 2: Processing, analysis and presentation of vibration data • ISO 13373-3:2015 Part 3: Guidelines for vibration diagnosis • ISO 13373-7:2017 Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants • ISO 13373-9:2017 Part 9: Diagnostic techniques for electric motors • ISO 13374 Condition monitoring and diagnostics of machine systems – Data processing, communication and presentation • ISO 13374-1:2003 Part 1: General guidelines • ISO 13374-2:2007 Part 2: Data processing • ISO 13374-3:2012 Part 3: Communication • ISO 13374-4:2015 Part 4: Presentation • ISO 13379 Condition monitoring and diagnostics of machines – Data interpretation and diagnostics techniques • ISO 13379-1:2012 Part 1: General guidelines • ISO 13379-2:2015 Part 2: Data-driven applications • ISO 13381 Condition monitoring and diagnostics of machines – Prognostics • ISO 13381-1:2015 Part 1: General guidelines • ISO 13385 Geometrical product specifications (GPS) – Dimensional measuring equipment • ISO 13385-1:2011 Part 1: Callipers; Design and metrological characteristics • ISO 13385-2:2011 Part 2: Calliper depth gauges; Design and metrological characteristics •
ISO 13399 Cutting tool data representation and exchange • ISO 13399-1:2006 Part 1: Overview, fundamental principles and general information model • ISO/TS 13399-2:2014 Part 2: Reference dictionary for the cutting items • ISO/TS 13399-3:2014 Part 3: Reference dictionary for tool items • ISO/TS 13399-4:2014 Part 4: Reference dictionary for adaptive items • ISO/TS 13399-5:2014 Part 5: Reference dictionary for assembly items • ISO/TS 13399-50:2013 Part 50: Reference dictionary for reference systems and common concepts • ISO/TS 13399-60:2014 Part 60: Reference dictionary for connection systems • ISO/TS 13399-70:2016 Part 70: Graphical data layout - Layer setting for tool layout • ISO/TS 13399-71:2016 Part 71: Graphical data layout - Creation of documents for standardized data exchange: Graphical product information • ISO/TS 13399-72:2016 Part 72: Creation of documents for the standardized data exchange - Definition of properties for drawing header and their XML-data exchange • ISO/TS 13399-80:2017 Part 80: Creation and exchange of 3D models - Overview and principles • ISO/TS 13399-100:2008 Part 100: Definitions, principles and methods for reference dictionaries • ISO/TS 13399-150:2008 Part 150: Usage guidelines • ISO/TS 13399-201:2014 Part 201: Creation and exchange of 3D models - Regular inserts • ISO/TS 13399-202:2015 Part 202: Creation and exchange of 3D models - Irregular inserts • ISO/TS 13399-203:2015 Part 203: Creation and exchange of 3D models - Replaceable inserts for drilling • ISO/TS 13399-204:2016 Part 204: Creation and exchange of 3D models - Inserts for reaming • ISO/TS 13399-301:2013 Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies • ISO/TS 13399-302:2013 Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools • ISO/TS 13399-303:2016 Part 303: Creation and exchange of 3D models - Solid end mills • ISO/TS 13399-304:2016 Part 304: Creation and exchange of 3D models - Solid milling cutters with arbor hole • ISO/TS 13399-305:2017 Part 305: Creation and exchange of 3D models - Modular tooling systems with adjustable cartridges for boring • ISO/TS 13399-307:2016 Part 307: Creation and exchange of 3D models - End mills for indexable inserts • ISO/TS 13399-308:2016 Part 308: Creation and exchange of 3D models - Milling cutters with arbor hole for indexable inserts • ISO/TS 13399-309:2016 Part 309: Creation and exchange of 3D models - Tool holders for indexable inserts • ISO/TS 13399-310:2017 Part 310: Creation and exchange of 3D models - Turning tools with carbide tips • ISO/TS 13399-311:2016 Part 311: Creation and exchange of 3D models - Solid reamers • ISO/TS 13399-312:2016 Part 312: Creation and exchange of 3D models - Reamers for indexable inserts • ISO/TS 13399-401:2016 Part 401: Creation and exchange of 3D models - Converting, extending and reducing adaptive items • ISO/TS 13399-405:2016 Part 405: Creation and exchange of 3D models - Collets • ISO 13402:1995 Surgical and dental hand instruments – Determination of resistance against autoclaving, corrosion and thermal exposure • ISO/IEC 13403:1995 Information technology - Information interchange on 300 mm optical disk cartridges of the
write once, read multiple (WORM) type using the CCS method • ISO 13404:2007 Prosthetics and orthotics – Categorization and description of external orthoses and orthotic components • ISO 13405 Prosthetics and orthotics – Classification and description of prosthetic components • ISO 13405-1:2015 Part 1: Classification of prosthetic components • ISO 13405-2:2015 Part 2: Description of lower limb prosthetic components • ISO 13405-3:2015 Part 3: Description of upper limb prosthetic components • ISO 13406 Ergonomic requirements for work with visual displays based on flat panels •
ISO 13406-2:2001 Part 2: Ergonomic requirements for flat panel displays [withdrawn 2008-11-14] • ISO 13407:1999 Human-centred design processes for interactive systems (This standard has been revised by
ISO 9241-210:2010) • ISO/IEC 13421:1993 Information technology – Data Interchange on 12.7 mm, 48-track magnetic tape cartridges – DLT 1 format • ISO/IEC 13422:1994 Information technology – Data interchange on 90 mm Flexible Disk Cartridges 10 MB capacity using sector servo tracking – ISO Type 304 • ISO 13444:2012 Technical product documentation (TPD) – Dimensioning and indication of knurling • ISO 13448 Acceptance sampling procedures based on the allocation of priorities principle (APP) • ISO 13448-1:2005 Part 1: Guidelines for the APP approach • ISO 13448-2:2004 Part 2: Coordinated single sampling plans for acceptance sampling by attributes • ISO 13450 Photography –
110-size cartridge, film and backing paper – Dimensions • ISO/TS 13471 Acoustics – Temperature influence on tyre/road noise measurement • ISO/TS 13471-1:2017 Part 1: Correction for temperature when testing with the CPX method • ISO 13472 Acoustics – Measurement of sound absorption properties of road surfaces in situ • ISO 13472-1:2002 Part 1: Extended surface method • ISO 13472-2:2010 Part 2: Spot method for reflective surfaces • ISO 13473 Characterization of pavement texture by use of surface profiles • ISO 13473-1:1997 Part 1: Determination of Mean Profile Depth • ISO 13473-2:2002 Part 2: Terminology and basic requirements related to pavement texture profile analysis • ISO 13473-3:2002 Part 3: Specification and classification of profilometers • ISO/TS 13473-4:2008 Part 4: Spectral analysis of surface profiles • ISO 13473-5:2009 Part 5: Determination of megatexture • ISO 13474:2009 Acoustics – Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment • ISO 13475 Acoustics – Stationary audible warning devices used outdoors • ISO 13475-1:1999 Part 1: Field measurements for determination of sound emission quantities • ISO/TS 13475-2:2000 Part 2: Precision methods for determination of sound emission quantities • ISO/IEC 13481:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1 GB per cartridge • ISO 13482:2014 Robots and robotic devices – Safety requirements for personal care robots •
ISO 13485:2016 Medical devices – Quality management systems – Requirements for regulatory purposes •
ISO/IEC 13490 Information technology – Volume and file structure of read-only and write-once compact disk media for information interchange • ISO/IEC 13490-1:1995 Part 1: General • ISO/IEC 13490-2:1995 Part 2: Volume and file structure • ISO 13491 Financial services – Secure cryptographic devices (retail) • ISO 13491-1:2016 Part 1: Concepts, requirements and evaluation methods • ISO 13491-2:2017 Part 2: Security compliance checklists for devices used in financial transactions • ISO 13492:2007 Financial services – Key management related data element – Application and usage of ISO 8583 data elements 53 and 96 • ISO/TR 13519:2012 Guidance on the development and use of ISO statistical publications supported by software • ISO/IEC 13522 Information technology - Coding of
multimedia and
hypermedia information • ISO/IEC 13522-1:1997 Part 1: MHEG object representation - Base notation (ASN.1) • ISO/IEC 13522-3:1997 Part 3: MHEG script interchange representation • ISO/IEC 13522-4:1996 Part 4: MHEG registration procedure •
ISO/IEC 13522-5:1997 Part 5: Support for base-level interactive applications • ISO/IEC 13522-6:1998 Part 6: Support for enhanced interactive applications • ISO/IEC 13522-7:2001 Part 7: Interoperability and conformance testing for ISO/IEC 13522-5 • ISO/IEC 13522-8:2001 Part 8: XML notation for ISO/IEC 13522-5 • ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison • ISO 13539:1998 Earth-moving machinery – Trenchers – Definitions and commercial specifications • ISO/IEC 13549:1993 Information technology - Data interchange on 130 mm optical disk cartridges - Capacity: 1.3 GB per cartridge • ISO 13550:2002 Hydrometric determinations – Flow measurements in open channels using structures – Use of vertical underflow gates and radial gates • ISO 13559:2002 Butter, fermented milks and fresh cheese – Enumeration of contaminating microorganisms – Colony-count technique at 30 degrees C • ISO/IEC 13560:2009 Information technology – Telecommunications and information exchange between systems – Procedure for the registration of assigned numbers for ISO/IEC 26907 and ISO/IEC 26908 • ISO/IEC TR 13561:1994 Information technology - Guidelines for effective use of optical disk cartridges conforming to ISO/IEC 10090 • ISO 13565 Geometrical Product Specifications (GPS) - Surface texture: Profile method; Surfaces having stratified functional properties • ISO 13565-1:1996 Part 1: Filtering and general measurement conditions • ISO 13565-2:1996 Part 2: Height characterization using the linear material ratio curve • ISO 13565-3:1998 Part 3: Height characterization using the material probability curve •
ISO 13567 Technical product documentation – Organization and naming of layers for
CAD • ISO/IEC 13568:2002 Information Technology –
Z formal specification notation – Syntax, type system and semantics • ISO/TR 13569:2005 Financial services – Information security guidelines • ISO 13574:2015 Industrial furnaces and associated processing equipment - Vocabulary • ISO/IEC 13575:1995 Information technology – Telecommunications and information exchange between systems – 50-pole interface connector mateability dimensions and contact number assignments • ISO 13577 Industrial furnaces and associated processing equipment - Safety • ISO 13577-1:2016 Part 1: General requirements • ISO 13577-2:2014 Part 2: Combustion and fuel handling systems • ISO 13577-3:2016 Part 3: Generation and use of protective and reactive atmosphere gases • ISO 13577-4:2014 Part 4: Protective systems • ISO 13579 Industrial furnaces and associated processing equipment - Method of measuring energy balance and calculating efficiency • ISO 13579-1:2013 General methodology • ISO 13579-2:2013 Reheating furnaces for steel • ISO 13579-3:2013 Batch-type aluminium melting furnaces • ISO 13579-4:2013 Furnaces with protective or reactive atmosphere • ISO/TS 13582:2015 Health informatics – Sharing of OID registry information • ISO 13586:2000 Plastics - Determination of fracture toughness (GIC and KIC) –
Linear elastic fracture mechanics (LEFM) approach • ISO/TR 13587:2012 Three statistical approaches for the assessment and interpretation of measurement uncertainty • ISO/IEC TR 13594:1995 Information technology – Lower layers security • ISO 13606 Health informatics – Electronic health record communication • ISO 13606-1:2008 Part 1: Reference model • ISO 13606-2:2008 Part 2: Archetype interchange specification • ISO 13606-3:2009 Part 3: Reference archetypes and term lists • ISO/TS 13606-4:2009 Part 4: Security • ISO 13606-5:2010 Part 5: Interface specification • ISO 13611:2014 Interpreting - Guidelines for
community interpreting • ISO/IEC 13614:1995 Information technology - Interchange on 300 mm optical disk cartridges of the write once, read multiple (WORM) type using the SSF method •
ISO 13616 Financial services –
International bank account number (IBAN) •
ISO 13628 Petroleum and natural gas industries – Design and operation of subsea production systems • ISO 13628-1:2005 Part 1: General requirements and recommendations • ISO 13628-2:2006 Part 2: Unbonded flexible pipe systems for subsea and marine applications • ISO 13628-3:2000 Part 3: Through flowline (TFL) systems • ISO 13628-4:2010 Part 4: Subsea wellhead and tree equipment • ISO 13628-5:2009 Part 5: Subsea umbilicals • ISO 13628-6:2006 Part 6: Subsea production control systems • ISO 13628-7:2005 Part 7: Completion/workover riser systems • ISO 13628-8:2002 Part 8:
Remotely Operated Vehicle (ROV) interfaces on subsea production systems • ISO 13628-9:2000 Part 9: Remotely Operated Tool (ROT) intervention systems • ISO 13628-10:2005 Part 10: Specification for bonded flexible pipe • ISO 13628-11:2007 Part 11: Flexible pipe systems for subsea and marine applications • ISO 13628-15:2011 Part 15: Subsea structures and manifolds • ISO/IEC 13642:1999 Information technology – Elements of management information related to the OSI Physical Layer • ISO 13653:1996 Optics and optical instruments - General optical test methods - Measurement of relative irradiance in the image field • ISO 13666:2012 Ophthalmic optics - Spectacle lenses - Vocabulary • ISO/IEC 13673:2000 Information technology - Document processing and related communication - Conformance testing for Standard Generalized Markup Language (SGML) systems • ISO 13687 Tourism and related services – Yacht harbours • ISO 13687-1:2017 Part 1: Minimum requirements for basic service level harbours • ISO 13687-2:2017 Part 2: Minimum requirements for intermediate service level harbours • ISO 13687-3:2017 Part 3: Minimum requirements for high service level harbours • ISO 13694:2015 Optics and photonics – Lasers and laser-related equipment – Test methods for laser beam power (energy) density distribution • ISO 13695:2004 Optics and photonics – Lasers and laser-related equipment – Test methods for the spectral characteristics of lasers • ISO 13696:2002 Optics and optical instruments – Test methods for radiation scattered by optical components • ISO 13697:2006 Optics and photonics – Lasers and laser-related equipment – Test methods for specular reflectance and regular transmittance of optical laser components • ISO 13702 Petroleum and natural gas industries - Control and mitigation of fires and explosions on offshore production installations - Requirements and guidelines • ISO/IEC 13712 Information technology – Remote Operations • ISO/IEC 13712-1:1995 Concepts, model and notation • ISO/IEC 13712-2:1995 OSI realizations –
Remote Operations Service Element (ROSE) service definition • ISO/IEC 13712-3:1995 OSI realizations – Remote Operations Service Element (ROSE) protocol specification • ISO/IEC 13714:1995 Information technology – Document processing and related communication – User interface to telephone-based services – Voice messaging applications •
ISO 13715:2017 Technical product documentation—Edges of undefined shape—Indication and dimensioning • ISO 13716:1999 Dentistry — Reversible-irreversible hydrocolloid impression material systems [Withdrawn: replaced with ISO 21563] • ISO/IEC 13719 Information technology - Portable Common Tool Environment (PCTE) • ISO/IEC 13719-1:1998 Part 1: Abstract specification • ISO/IEC 13719-2:1998 Part 2: C programming language binding • ISO/IEC 13719-3:1998 Part 3: Part 3: Ada programming language binding • ISO/IEC 13719-4:1998 Part 4: IDL binding (
Interface Definition Language) • ISO 13720:2010 Meat and meat products – Enumeration of presumptive
Pseudomonas spp. • ISO 13722:2017 Microbiology of the food chain – Enumeration of
Brochothrix spp. – Colony-count technique • ISO 13731:2001 Ergonomics of the thermal environment - Vocabulary and symbols • ISO 13732 Ergonomics of the thermal environment – Methods for the assessment of human responses to contact with surfaces • ISO 13732-1:2006 Part 1: Hot surfaces • ISO/TS 13732-2:2001 Part 2: Human contact with surfaces at moderate temperature • ISO/IEC 13751:2001 Information technology - Programming languages, their environments and system software interfaces - Programming language Extended APL • ISO 13766:2006 Earth-moving machinery –
Electromagnetic compatibility • ISO 13779 Implants for surgery – Hydroxyapatite • ISO 13779-2:2008 Part 2: Coatings of hydroxyapatite • ISO 13779-3:2008 Part 3: Chemical analysis and characterization of crystallinity and phase purity • ISO 13779-4:2002 Part 4: Determination of coating adhesion strength • ISO 13779-6:2015 Part 6: Powders • ISO 13781:2017 Implants for surgery – Homopolymers, copolymers and blends on poly(lactide) – In vitro degradation testing • ISO 13782:1996 Implants for surgery – Metallic materials – Unalloyed tantalum for surgical implant applications • ISO/IEC 13800:1996 Information technology - Procedure for the registration of identifiers and attributes for volume and file structure • ISO 13810:2015 Tourism services – Industrial tourism – Service provision • ISO/TS 13811:2015 Tourism and related services – Guidelines on developing environmental specifications for accommodation establishments • ISO/IEC 13816:2007 Information technology - Programming languages, their environments and system software interfaces - Programming language
ISLISP • ISO/IEC 13817 Information technology - Programming languages, their environments and system software interfaces - Vienna Development Method - Specification Language • ISO/IEC 13817-1:1996 Part 1: Base language •
ISO/IEC 13818 Information technology – Generic coding of moving pictures and associated audio information • ISO/TS 13830:2013 Nanotechnologies – Guidance on voluntary labelling for consumer products containing manufactured nano-objects •
ISO 13837 Road vehicles –
Safety glazing materials – Method for the determination of solar transmittance • ISO/IEC TR 13841:1995 Information technology - Guidance on measurement techniques for 90 mm optical disk cartridges • ISO/IEC 13842:1995 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2 GB per cartridge • ISO 13843:2017 Water quality – Requirements for establishing performance characteristics of quantitative microbiological methods •
ISO 13849 Safety of machinery – Safety related parts of control systems • ISO 13850:2015 Safety of machinery – Emergency stop function – Principles for design • ISO 13854:2017 Safety of machinery – Minimum gaps to avoid crushing of parts of the human body • ISO 13855:2010 Safety of machinery – Positioning of safeguards with respect to the approach speeds of parts of the human body • ISO 13860:2016 Machinery for forestry – Forwarders – Terms, definitions and commercial specifications • ISO 13861:2000 Machinery for forestry – Wheeled skidders – Terms, definitions and commercial specifications • ISO 13862:2000 Machinery for forestry – Feller-bunchers – Terms, definitions and commercial specifications • ISO/IEC 13863:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Path replacement additional network feature • ISO/IEC 13864:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Name identification supplementary services • ISO/IEC 13865:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Transfer supplementary service • ISO/IEC 13866:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call completion supplementary services • ISO/IEC 13868:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Name identification supplementary services • ISO/IEC 13869:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Transfer supplementary service • ISO/IEC 13870:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Completion supplementary services • ISO/IEC 13871:1995 Information technology – Telecommunications and information exchange between systems – Private telecommunications networks – Digital channel aggregation • ISO/IEC 13872:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Diversion supplementary services • ISO/IEC 13873:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Diversion supplementary services • ISO/IEC 13874:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Path Replacement additional network feature • ISO/IEC 13886:1996 Information technology - Language-Independent Procedure Calling (LIPC) • ISO/IEC 13888 Information technology - Security techniques -
Non-repudiation • ISO/IEC 13888-1:2009 Part 1: General • ISO/IEC 13888-2:2010 Part 2: Mechanisms using symmetric • ISO/IEC 13888-3:2009 Part 3: Mechanisms using asymmetric techniques • ISO 13920:1996 Welding – General tolerances for welded constructions – Dimensions for lengths and angles – Shape and position • ISO/IEC 13923:1996 Information technology – 3.81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-2 format using 120 m length tape • ISO 13926 Pen systems • ISO 13926-1:2004 Part 1: Glass cylinders for pen-injectors for medical use • ISO 13926-2:2011 Part 2: Plunger stoppers for pen-injectors for medical use • ISO 13926-3:2012 Part 3: Seals for pen-injectors for medical use •
ISO 13940:2015 Health informatics – System of concepts to support continuity of care • ISO 13943:2017 Fire safety - Vocabulary • ISO 13958:2014 Concentrates for haemodialysis and related therapies • ISO 13959:2014 Water for haemodialysis and related therapies • ISO 13960:2010 Cardiovascular implants and extracorporeal systems – Plasmafilters • ISO/IEC 13961:2000 Information technology -
Scalable Coherent Interface (SCI) • ISO/IEC 13962:1995 Information technology – Data interchange on 12.7 mm, 112-track magnetic tape cartridges – DLT 2 format • ISO/IEC 13963:1995 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 230 MB per cartridge • ISO 13969:2003 Milk and milk products – Guidelines for a standardized description of microbial inhibitor tests • ISO 13970:2011 Recreational diving services – Requirements for the training of recreational snorkelling guides • ISO/TS 13972:2015 Health informatics – Detailed clinical models, characteristics and processes • ISO/TR 13973:2014 Artificial recharge to groundwater • ISO 13990 Textile machinery and accessories – Yarn feeders and yarn control for knitting machines • ISO 13990-1:2006 Part 1: Vocabulary ==Notes==