Pin

Pins have been found at archaeological sites dating as early as the Paleolithic, made of bone and thorn, and at Neolithic, Celtic and Ancient Roman sites. Neolithic sites are rich in wooden pins, and are still common through Elizabethan times. Metal pins dating to the Bronze Age have been found in Asia, North Africa and Europe, like the hammer-headed pins from the kurgan burials in the northeastern Caucasus. Many later pins were made of brass, a relatively hard and ductile metal that became available during the Bronze Age. This development was followed by the use of steel which was much stronger but tended to rust when exposed to humid air. The development of inexpensive electroplating techniques allowed the steel to be plated with nickel. Nickel did not rust, but tended to flake off the steel in humid weather, again allowing it to rust. However, this took many months or even years to happen, and as nickel plated steel pins were usually used only temporarily to hold cloth in place prior to sewing, no further refinement has been considered necessary. However, some modern specialty pins are made out of rust-proof and very strong titanium. Production , 15-17 century A pinners guild was first established in London in 1356, spreading to other towns, but falling short of the quality produced by French pinmakers, discussed in the ''Art de l'épinglier'' () (1761) where Henri-Louis Duhamel du Monceau gives details about the division of labor used by French pinmakers: Adam Smith described the manufacture of pins as part of his discussion about the division of labor in the Wealth of Nations. John Ireland Howe invented a pin-making machine in 1832, and an improved machine in 1841; his Howe Manufacturing Company of Derby, Connecticut, used three machines to produce 72,000 pins per day in 1839. Walter Hunt invented the safety pin by forming an eight-inch brass pin into a bent pin with a spring and guard. He sold the rights to his invention to pay a debt to a friend, not knowing that he could have made millions of dollars. ==Straight pins==

The push pin was invented in 1900 by Edwin Moore and quickly became a success. These pins are also called "map pins" and are distinguished by having an easy to grip head. See also drawing pin or thumb tack. ==Steel pins without heads==

Thin, hardened pins can be driven into wood with a hammer with the goal of not being seen. == Mechanical fasteners ==

In engineering and machine design, a pin is a machine element that secures the position of two or more parts of a machine relative to each other. A large variety of types has been known for a long time; the most commonly used are solid cylindrical pins, solid tapered pins, groove pins, slotted spring pins and spirally coiled spring pins. • Clevis pin • Cotter pin • Slotted pin • Spiral pin • Split pin • Solid pin • Spring pin == Explanatory notes ==