The general technical specification of the 20/25 are:
Engine: inline 6-cylinder, overhead pushrod operated valve engine with capacity. Separate cast iron block and aluminium crankcase with detachable cast iron 6-plug head. It has an bore with a stroke. 7-bearing crankshaft with vibration damper. Pressure fed lubrication with relief valve feeding rocker shaft and timing gears.
Ignition System: independent coil and standby magneto systems. 12V system 50
Amp-hours battery. Centrifugal advance with hand override. Distributor gap
Cooling System: The famous Rolls-Royce radiator with triangular top with vertical louvres, the angle of which can be adjusted to control engine cooling. In early models, the radiator shutters is operated manually via a lever on the dashboard. Cars from 1931 onward have an automatic control via a thermostat. Engine driven centrifugal pump and belt-driven fan.
Carburation: A single Rolls-Royce two-jet type with starting carburettor, automatic air valve and steering column control.
Fuel: rear tank, increased to from 1932 onward. "Autovac" vacuum-fed fuel pump. Electric fuel gauge from 1933 onward.
Transmission: four-speed gearbox. Gearboxes from 1932 onward have
synchromesh in third and top gears. Right hand gear change. Single dry plate clutch. Open drive propeller shaft.
Suspension: Semi-elliptic leaf springs front and rear. Hydraulic dampers.
Brakes: Internal expanding four-wheel operation with independent handbrake on the rear wheels. Mechanical servo motor driven from the gearbox.
Chassis lubrication: "One-Shot" Bijur centralised chassis lubrication system.
Steering: Worm and nut. (1936:
Marles cam and roller – GTK 42) ==Improvements made during production run==