seats The original
Audi C5 RS 6 Quattro ('''
Typ 4B''') was the top-of-the-line user of the
Volkswagen Group C5 platform (1997–2004), and was initially available as a five-door five-seat Avant - Audi's name for an
estate or station wagon. A four-door five-seat
saloon/sedan followed shortly after the launch of the Avant. Derived from the
Audi C5 S6 (itself derived from the
Audi C5 A6), the RS 6 also shares the aluminium structure from the firewall and forward with the C5 A6s with
V8 engines (A6 4.2 V8 Quattro, S6 saloon/Avant). It was manufactured from July 2002 through to September 2004. Official performance figures for the Avant, whilst consuming the recommended high
octane 98 RON "Super Plus" unleaded petrol indicate the 0- dash would be completed in 4.6 seconds (s), reaching in 17.8 seconds (17.6 s for the saloon). Official figures state an electronically limited top speed of , although most "RS" owners report that the speed limiter is rather liberal on all RS cars, with genuine 'limited' top speeds of being possible to achieve. Using a lower octane-rated petrol, such as the standard 95 RON "Premium" unleaded will reduce the engine power output, and have logical reduction in performance. Luggage capacity, measured according to the VDA block method in the Avant ranges from , to with the rear seats folded down. For the saloon, the boot holds .
C5 powertrain For the C5 RS 6
powertrain detail, the engine is an all-aluminium alloy
twin-turbocharged ('biturbo'),
double overhead camshaft, 5 valve per
cylinder version of Audi's 4.2-litre 90° V8 petrol engine (parts code prefix: 077, identification code:
BCY), developed and manufactured in Germany and the UK by quattro GmbH and
Cosworth Technology (now known as
MAHLE Powertrain). With the addition of the two
turbochargers (one per
cylinder bank), the power output of the V8 engine increased to at 5,700 to 6,400 rpm, and of torque. The combination of the 4.2-litre V8,
variable inlet valve timing, and twin turbochargers give the RS 6 an exceptionally wide
power band, with peak torque available from 1,950 to 5,600 rpm. Further detail includes fully sequential electronic
multi-point fuel injection with
intake manifold fuel injectors, mapped direct
ignition system with solid-state high voltage distribution using eight individual single-spark
ignition coils and
NGK longlife
spark plugs, and three
knock sensors. Engine management uses a
Bosch Motronic ME 7.1.1
engine control unit, which controls all functions of the engine operation; including fuel delivery, ignition system, valve timing, emissions control systems, and torque reduction control—the latter operating in conjunction with the
Bosch ESP 5.7
Electronic Stability Programme, as part of the "Anti Slip Regulation" (ASR)
traction control system. The engine is compliant with the
European Union Euro3 (EU3) standard, and includes two close-coupled primary
catalytic converters (CATs), two underfloor main CATs, and four heated
oxygen sensors which manage the
cylinder bank selective lambda control. This results in a
CO2 emissions rating of 350 g/km for the Avant and saloon in standard configuration. It has an electronically controlled five-speed
ZF 5HP24A tiptronic automatic transmission (parts code prefix: 01L, identification code: GAG) (
gear ratios—1st: 3.571, 2nd: 2.200, 3rd: 1.505, 4th: 1.000, 5th: 0.804), with lock-up
torque converter in all forward gears. It has "hill-detection" capability, and despite many press articles stating that the gearbox was programmed to
"blip" the throttle for downshifting gear changes, no UK owners have ever found this feature to be present. The
transmission control unit ECU incorporates "
fuzzy logic" with its "Dynamic Shift Programme" (DSP), with the shift pattern adapting to suit individual driving styles. 'Tiptronic' manual control can be achieved with either the floor-mounted gear shift lever or the steering wheel-mounted 'paddles'. The RS 6 was only available with Audi's
Torsen-based Quattro permanent four-wheel drive, utilising the Torsen T-2 dynamic 'automatic torque biasing' (ATB) centre
differential (diff), a modified unit which was being used in the 6.0-litre
W12-powered
Audi D3 A8. The torque from the engine is first routed from the gearbox output shaft to the Torsen centre diff, and then automatically divided and apportioned between the front and rear axles. The front and rear axle differentials (ratio: 3.197, rear axle identification code: GGW) are a conventional "open" type but utilise an "Electronic Differential Lock" (EDL). EDL is an integrated additional function of the Bosch
Electronic Stability Programme (ESP) system, and works by monitoring and comparing the individual wheel speeds across an axle, and braking an individual wheel which is sensed to have lost traction (spinning), thus transferring torque across the axle to the wheel/tyre which does have grip. "Anti-Slip Regulation" (ASR), more commonly known as
traction control system completes the Bosch ESP-related driver aids.
C5 suspension and steering Utilising the same fully
independent four-link front suspension, and
double wishbone rear, as its related
A6 and
S6, the RS 6 was lowered by , with a 30% stiffer spring rate, and 40% increased compression damping. The RS6 also served as the debut model for Audi's "Dynamic Ride Control" (DRC) system. The DRC system is mainly mechanical, and uses a pump to provide additional pressure to individual
dampers (shock absorbers) during cornering, acceleration or braking; to counteract rolling and pitching. The system can adjust the stiffness at each individual damper constantly; to maintain both a comfortable ride on straight roads, and a high level of poise and grip when cornering hard, accelerating, or braking. The DRC's main advantage is that it operates without the need for complicated electronics, as required in similar systems from Mercedes-Benz and other competitors. Its main drawback is that the DRC dampers have been known to fail (leaking fluid from the cross-linked circuits), which can affect the handling and ride quality of the vehicle; some owners have reported needing multiple replacements of faulty DRC units and many drivers have opted to replace the system with simpler and more reliable aftermarket coil-over suspension.
C5 brakes, wheels and tyres The front brakes feature fixed
Brembo 8-piston monoblock
brake calipers, working with radially vented and cross-drilled
brake discs, sized at in diameter, by thick. The rear features single-piston floating
ATE calipers with integrated cable-operated parking brake mechanism, mated to radially vented disc and cross-drilled, sized by . Front and rear brake calipers are finished in a high-gloss black paint, with the fronts incorporating the Audi "RS" logo. Both front and rear discs are held in by metal pins to the lightweight disc hub, and allow of lateral thermal expansion from the hub centre.
Bosch ESP 5.7
Electronic Stability Programme, with
Anti-lock Braking System (ABS),
Electronic Brakeforce Distribution (EBD), and
Brake Assist (BA) was standard fitment. There were a total of three
original equipment manufacturer (OEM) wheel and tyre types available with the RS 6. In Europe and elsewhere, 19-inch wheels were standard, with an optional 18-inch package. In the U.S. market, the 18-inch package was the only available offering. An 18-inch winter package, with
Dunlop SP Winter Sport M3 tyres () was universally available.
C5 RS 6 Plus Between April 2004 and September 2004, there was a final limited run of an even higher-performance RS 6, named the
Audi RS 6 Plus. This had an increased engine power output (identification code:
BRV), and produced at 6,000-6,400 rpm, with the same of torque at 1,950-6,000 rpm. This engine was also developed and manufactured in the UK by
Cosworth Technology (now known as
MAHLE Powertrain). The additional performance was achieved with a new
engine control unit (ECU), and two additional coolant
radiators behind the side-mounted
intercoolers (these were standard fitment on the standard RS 6 in hotter climate countries). Official performance figures indicate the discipline of sprinting from standstill to in 4.4 seconds. The RS 6 Plus carries on to reach in 20.36 seconds, and has an official top speed of . The RS 6 Plus came with Dynamic Ride Control (DRC) as standard, and also included a no-cost option of "Sports Suspension Plus", which lowered the standard sports
suspension by a further over the standard RS 6. A revised steering rack, with a reduced ratio of 14.3 for firmer steering feel was included, and resulted in a
turning circle of . The brakes now included cross-drilled discs. The wheels were only available in the 9Jx19-inch '5-arm design' alloys, finished in "anthracite" (dark grey), with tyres. The car was available only as an Avant and was sold only in European markets. Visual differences for the RS 6 Plus included the "black optic pack", which consisted of black finish to the framing of the radiator grille, exterior window trims, tailgate lower trim, roof rails, and exhaust tailpipes. It quickly sold out once it was released (999 units total). The last three digits of the
Vehicle Identification Number (VIN) are reproduced on a plaque inside the car, displayed on the
centre console.
C5 RS 6 in auto racing The RS 6 was used in the North American
SPEED World Challenge GT Series of auto racing for three years - 2002 to 2004, claiming the manufacturers' championship victory successively in all three years. Once again, the special race derivative of the twin-turbo V8 engine was developed and manufactured in the UK by
Cosworth Technology (now known as
MAHLE Powertrain). However, the 2005 season proved difficult due to performance restrictions imposed on
Champion Audi Racing by the
Sports Car Club of America (SCCA), with Champion deciding to run a different wheel diameter, and the trade-off was reducing boost pressure. ==C6 (
Typ 4F, 2008–2010)==