China According to a 2003 report of the
United Nations Conference on Trade and Development, China was the recipient of US$53.5 billion in direct foreign investment, making it the world's largest recipient of direct foreign investment, exceeding the US for the first time. Also, it approved the establishment of nearly 500,000 foreign-investment enterprises. The US had 45,000 projects by 2004 with an in-place investment of over 48 billion. Until recently, no guidelines existed on how foreign investment was to be handled due to the restrictive nature of China toward foreign investors. Following the death of
Mao Zedong in 1976, initiatives in foreign trade began to be applied, and law applicable to foreign direct investment was made clear in 1979, while the first Sino-foreign equity venture took place in 2001. The corpus of joint venture law has improved since then. Companies with foreign partners can carry out manufacturing and sales operations in China and can sell through their own sales network. Foreign-Sino companies have export rights which are not available to wholly Chinese companies, as China desires to import foreign technology by encouraging JVs and the latest technologies. Under Chinese law, foreign enterprises are divided into several basic categories. Of these, five will be described or mentioned here: three relate to industry and services and two as vehicles for foreign investment. Those five categories of Chinese foreign enterprises are: Sino-foreign equity joint ventures (EJVs), Sino-foreign co-operative joint ventures (CJVs), wholly foreign-owned enterprises (WFOEs), though they are not actually joint ventures and mentioned only for comparison, foreign investment companies limited by shares (FICLBS), and investment companies through foreign investors (ICFI). Each category is described below.
Equity joint ventures An EJV is formed between a Chinese partner and a foreign investor. It is incorporated in both Chinese (official) and in English (with equal validity), with limited liability. Prior to China's entry into the WTO – and thus the existence of WFOEs – EJVs predominated among Chinese joint ventures. In an EJV, the partners share profits, losses, and risk in equal proportion to their respective contributions to the venture's registered capital. The JV contract and the articles of association are the EJV's two most fundamental legal documents. The Articles mirror many of the provisions of the JV contract. In case of conflict the JV document has precedence. These documents are prepared at the same time as the feasibility report. There are also ancillary documents (termed "offsets" in the US) covering know-how and trademarks and supply-of-equipment agreements. Minimum levels of equity are prescribed for investments where the foreign equity and debt levels are: • Less than US$3 million: equity must constitute 70% of the investment • Between US$3 million and US$10 million: minimum equity must be US$2.1 million and at least 50% of the investment • Between US$10 million and US$30 million: minimum equity must be US$5 million and at least 40% of the investment • More than US$30 million: minimum equity must be US$12 million and at least 1/3 of the investment. The total foreign investment in the project must be at least 25%. No minimum investment is set for the Chinese partner. The timing of investments must be mentioned in the Agreement, and failure to invest at the indicated time draws a penalty.
Co-operative joint ventures Co-operative joint ventures (CJVs) are permitted under the law governing joint ventures between Chinese and non-Chinese partners. Co-operative enterprises are also called contractual operative enterprises. CJVs may have a limited or unlimited structure. The limited-liability version is similar to an EJV – the foreign investor provides the majority of funds and technology and the Chinese party provides land, buildings, equipment, etc. However, there are no minimum limits on the foreign partner, allowing them to be a minority shareholder. The other format of the CJV is similar to a partnership where the parties jointly incur unlimited liability for the debts of the enterprise with no separate
legal personality being created. In both the cases, the status of the formed enterprise is that of a legal Chinese person which can hire labor directly as, for example, a Chinese national contractor might. Minimum capital is registered at various levels of investment. Other differences from the EJV are: • A co-operative JV does not have to be a legal entity. • The partners in a CJV are allowed to share profit on an agreed basis,
not necessarily in proportion to capital contribution. This proportion also determines the control and the risks of the enterprise in the same proportion. • It may be possible to operate a CJV in a restricted area. • A CJV could allow negotiated levels of management and financial control, as well as methods of recourse associated with equipment leases and service contracts. In an EJV management control is through allocation of board seats. • During the term of the venture, the foreign participant can recover their investment, provided the contract permits it. All fixed assets will become the property of the Chinese participant on termination of the JV. • Foreign partners can often obtain higher levels of control by negotiating management, voting, and staffing rights into a CJV's articles, since control does not have to be allocated according to equity stakes. Convenience and flexibility are the main characteristics of this type of investment. It is therefore easier to find co-operative partners and to reach an agreement than with an EJV. With changes in the law, it has become possible to merge with a Chinese company for a quick start. A foreign investor does not need to set up a new corporation in China. Instead, the investor uses the Chinese partner's business license under a contractual arrangement. However, under the CJV, the land stays in the possession of the Chinese partner. The percentage of the CJV owned by each partner may also change throughout the JV's life, giving the option to the foreign investor, by holding higher equity, to obtain a faster rate of return with the concurrent wish of the Chinese partner of a later larger role in the operations of the JV and maintaining long-term control. Parties to an EJV, CJV or WFOE prepare a
feasibility study. It is a non-binding document – the parties are still free to choose not to proceed with the project. The feasibility study must cover the fundamental technical and commercial aspects of the project before the parties can proceed to formalize the necessary legal documentation.
Wholly foreign-owned enterprises (WFOEs) WFOEs are enterprises solely controlled by foreign investment. China's entry into the
World Trade Organization (WTO) around 2001 has had profound effects on foreign investment. Not being a JV, they are considered here for comparison only. The WFOE is a Chinese legal person and has to obey all Chinese laws. As such, it is allowed to enter into contracts with appropriate government authorities to acquire land use rights, rent buildings, and receive utility services. In this it is more similar to a CJV than an EJV. WFOEs are expected by the PRC to use the most modern technologies and to export at least 50% of their production, with all of the investment to be wholly provided by the foreign investor(s) and the enterprise to be within their total control. WFOEs are typically limited liability enterprises as with EJVs, but the liability of the directors, managers, advisers, and suppliers depends on the rules which govern the Departments or Ministries which control product liability, worker safety or environmental protection. An advantage the WFOE enjoys over its alternates is protection of its
know-how, but a disadvantage is the absence of a Chinese party. As of the 3rd quarter of 2004, WFOEs had replaced EJVs and CJVs as follows: which came into effect on January 1, 2020.
List of prominent joint ventures in China •
AMD-Chinese •
Huawei-Symantec •
Shanghai Automotive Industry Corporation (上海汽车集团股份有限公司), also known as SAIC (上汽) and SAIC-GM (上汽通用), is a Chinese state-owned automotive manufacturing company headquartered in Shanghai, operating in joint venture with US owned
General Motors. Products produced by SAIC joint venture companies are sold under marques including
Baojun,
Buick,
Chevrolet,
Iveco,
Škoda, and
Volkswagen. •
General Motors with SAIC Motor, formerly known as Shanghai General Motors Company Ltd., makes numerous cars in China in four factories, especially under the Buick marque, but also some Chevrolet and Cadillac models. In November 2018, the company announced new Chevrolet models for the Chinese market, including an extended-wheelbase Malibu XL, a new Chevy SUV concept, and a new Monza. •
Volkswagen Group China — Numerous VW and Audi cars manufactured in China are made under two joint-venture partnerships:
FAW-Volkswagen and
SAIC Volkswagen. •
Beijing Benz Automotive Co., Ltd is a joint venture between BAIC Motor and
Daimler AG. As of November 22, 2018, a full two million Mercedes-Benz vehicles had been built in China by this alliance. •
Dongfeng Motor Corporation (东风汽车公司, abbreviated to 东风) is a Chinese state-owned automobile manufacturer headquartered in
Wuhan. The company was the second-largest Chinese vehicle maker in 2017 by production volume, manufacturing over 4.1 million vehicles that year. Its own brands are
Dongfeng,
Venucia, and Dongfen Fengshen. Joint ventures include
Cummins,
Dana,
Honda,
Nissan,
Infiniti,
PSA Peugeot Citroën,
Renault,
Kia, and
Yulon. •
FAW Group Corporation (第一汽车集团, abbreviated to 一汽) is a Chinese state-owned automotive manufacturing company headquartered in
Changchun. In 2017, the company ranked third in terms of output making 3.3 million vehicles. FAW sells products under at least ten different brands including its own and
Besturn/Bēnténg, Dario,
Haima,
Hongqi,
Jiaxing,
Jie Fang,
Jilin, Oley,
Jie Fang and Yuan Zheng, and
Tianjin Xiali. FAW joint ventures sell
Audi,
General Motors,
Mazda,
Toyota and
Volkswagen. •
GAC (Guangzhou Automobile Group), is a Chinese state-owned automobile manufacturer headquartered in Guangzhou. They were the sixth biggest manufacturer in 2017, manufacturing over 2 million vehicles in 2017. GAC sells passenger cars under the Trumpchi brand. In China, they are more known for their foreign joint ventures with Fiat, Honda, Isuzu, Mitsubishi, and Toyota. • '''
Chang'an Automobile Group''' (重庆长安汽车股份有限公司, abbreviated to 长安) is an automobile manufacturer headquartered in
Chongqing, and is a state-owned enterprise. In 2017, the company ranked fourth in terms of output, making 2.8 million vehicles in 2017. Changan designs, develops, manufactures and sells passenger cars sold under the Changan brand and commercial vehicles sold under the Chana brand. Foreign joint venture companies include
Suzuki,
Ford,
Mazda and
PSA Peugeot Citroën. •
Chery, a Chinese state-owned automobile manufacturer based in Anhui. They were the tenth biggest manufacturer in 2017. They have a foreign joint venture with Jaguar Land Rover for the production of
Jaguar and
Land Rover cars in China. •
Brilliance Auto is a Chinese state-owned automobile manufacturer based in Shenyang. They were the ninth biggest manufacturer in 2017. They have a foreign joint venture with BMW and also sells passenger vehicles under their own brand Brilliance and are expected to make 520,000 cars in China during 2019. •
Honda Motor Co has a joint venture with Guangzhou Automobile Group (GAC Group) •
Geely-Volvo, or
Geely, is the biggest privately owned automobile manufacturer and seventh biggest manufacturer overall in China. Their flagship brand Geely Auto became the top Chinese car brand in 2017. Currently one of the fastest growing automotive groups in the world, Geely is known for their ownership of Swedish luxury car brand
Volvo. In China, their passenger car brands include Geely Auto,
Volvo Cars, and
Lynk & Co. The entire
Volvo Cars company has been owned by the Chinese company Geely since 2010, and Geely manufactures most of the XC60 vehicles in China for export.
India JV companies are the preferred form of corporate investment, but there are no separate laws for joint ventures. Companies which are incorporated in India are treated on par with domestic companies. • Two parties (individuals or companies) incorporate a company in India. The business of one party is transferred to the new company, and as consideration for the transfer, shares are issued by the company and subscribed to by that party. The other party subscribes to the shares in cash. • Two parties subscribe to the shares of a JV company in agreed proportions, in cash, and start a new business. • The promoter shareholder of an existing Indian company and a third party, who/which may be an individual or a company, one of them non-resident or both residents, collaborate to jointly carry on the business of that company, and its shares are taken by the said third party through payment in cash. Private companies (only about $2500 is the lower limit of capital, no upper limit) are allowed to invest in joint ventures in India together with public companies, limited or not, and likewise with partnerships. Sole proprietorships are allowed too. However, the latter are reserved for non-resident Indians. Through capital market operations, foreign companies can transact on the two exchanges without prior permission of the
Reserve Bank of India, but they cannot own more than 10 percent equity in paid-up capital of Indian enterprises, while aggregate foreign institutional investment (FII) in an enterprise is capped at 24 percent. Joint ventures may also be established as wholly owned subsidiaries (WOS) and project offices and branch offices, incorporated in India or not. Sometimes, it is understood that branches are started to test the market and get its flavor. Equity transfer from residents to non-residents in
mergers and acquisitions (M&A) is usually permitted under the automatic route. However, if the M&As are in sectors and activities requiring prior government permission (Appendix 1 of the Policy) then transfer can proceed only after permission. Joint ventures with trading companies are allowed together with imports of secondhand plants and machinery. It is expected that in a JV, the foreign partner supplies technical collaboration and the pricing includes the foreign exchange component, while the Indian partner makes available the factory or building site and locally made machinery and product parts. Many JVs are formed as public limited companies (LLCs) because of the advantages of limited liability.
Ukraine In
Ukraine, most joint ventures are operated in the form of a
limited liability company, as there is no law specifically providing for the establishment of joint ventures. Protection of the rights of foreign investors is guaranteed by the Law of Ukraine called "On Foreign Investment". A JV can be established without the formation of a separate legal entity under a so called Cooperation Agreement. Under the Ukraine civil code, a CA can be established by two or more parties; rights and obligations of the parties are regulated by the agreement. Cooperation Agreements are widely spread in Ukraine, mainly in the field of oil and
gas production. == Public perception ==