in
Munich) . During 1943, the
RAF's
Bomber Command and the
US Army Air Force mounted a series of heavy raids against Germany. Despite heavy bomber losses, these prompted
Luftwaffe research into considerably more powerful anti-bomber weaponry in order to reduce the cost in lost
fighter aircraft and aircrew. A massive development effort resulted in a number of heavy-calibre
autocannon designs,
air-to-air rockets,
SAMs, and the X-4. Work on the X-4 began in June 1943, by
Max Kramer at . The idea was to build a missile with enough range to allow it to be fired from outside the range of the bombers' guns (a concept now known as
stand-off weaponry). The bombers' defensive guns had a maximum effective range of about . The missile was to be guided with enough accuracy to guarantee a "kill". The X-4 met these specifications and more. Its
BMW 109-448 rocket motor accelerated the missile to over and kept the X-4 at this speed during its "cruise", between . The rocket burned a
hypergolic mixture of
S-Stoff (
nitric acid with 5%
iron(III) chloride) and
R-Stoff (an organic amine-mixture of 50%
dimethylaminobenzene and 50%
triethylamine called
Tonka 250) as propellant, delivering thrust initially, declining to over the 17-second burn. As there was no room for a
fuel pump, the fuel components were forced into the motor by pistons inside long tubes, the tubes being coiled (similar to a
coil spring) to fit inside the airframe. S-Stoff was so
corrosive, it dissolved all
base metals and was extremely difficult and dangerous to handle. The Germans planned to replace the motor with a
solid fuel design as soon as possible. The missile was
spin-stabilized at about 60
rpm or one rotation a second, so any asymmetrical thrust from the engine or inaccuracies in the control surfaces would be evened out. Signals to operate control surfaces on the tail were sent via two wires (a method chosen to avoid radio jamming), which unwound from
bobbins housed within long, bullet-shaped fairings, themselves mounted either on the roots of an opposing pair of the larger mid-body fins (there were four, swept 45°), or on one pair of those same fins' opposing tips; these contained a total of about of wire. The wires were controlled by a
joystick in the cockpit. A
gyroscope kept track of "up" so control inputs from the pilot's joystick in the launch aircraft could be translated into
yaw and
pitch as the missile spun. Flares attached to two of the midsection wings were used to keep the missile visible through the smoke of its motor. The warhead consisted of a
fragmentation device that had a
lethal radius of about . It was thought that the guidance system would allow the pilot to get the missile into this range in terms of pitch and yaw. But with the ranges the missile could operate at, it would be almost impossible to judge range to the target bomber anywhere near this accuracy. For this reason the missile mounted a
proximity fuze known as a
Kranich (
Crane), using an acoustical system tuned to the 200
Hz sound of
the B-17's engines in cruise mode, activated by the
Doppler shift as the missile approached. The trigger range was . The first flight test occurred on August 11, 1944, using a
Focke-Wulf Fw 190 for the launch platform. Subsequent tests used the
Junkers Ju 88 and
Messerschmitt Me 262, although they were not launched from the latter. The X-4 had originally been intended for use by single-seat fighters (including the Me 262 and possibly the
Dornier Do 335), but the problems in guiding both the missile and the aircraft at the same time proved unworkable. Instead, the X-4 was re-directed to multi-seat aircraft like the Ju 88, while the unguided
R4M rocket was to be used in single-seaters. The X-4 was designed to be easily assembled by
unskilled labour and
airframe production began in early 1945 incorporating low-cost (non-strategic) materials, such as wood for fins. Production was hampered by Allied bombing of the BMW rocket engine factory at
Stargard, though as many as 1,000 X-4s may have been completed, the missile was never officially delivered to the
Luftwaffe. The
fighter-
interceptor designed to use this missile as its primary weapon was the
Focke-Wulf Ta 183 Huckebein, which never got out of the project stage. After the war, French engineers tried to develop a domestic version of the X-4, the
Nord SS.10. 200 units were manufactured between 1947 and 1950. However, the program was disbanded due to the dangerous pre-flight refueling involved (the hypergolic nitric acid and Tonka combination was highly explosive). ==Specification==