Sikorsky S-42

During the inaugural flight of Sikorsky's previous flying boat, the S-40, on November 19, 1931, the pilot and Pan American Airways consultant, Charles Lindbergh, who considered the S-40 a monstrosity, engaged designer Igor Sikorsky in a conversation about what he thought the next airplane should look like. Sikorsky argued that design development should be incremental and that the safe approach would be a larger S-40. Lindbergh argued that a low drag design, with a range in still air of , was needed. In June 1931 Pan Am president Juan Trippe had requested designs from six aircraft companies for an aircraft able to span the oceans. The new design would need increased lifting capacity to carry enough fuel and of mail, but no passengers, for a nonstop flight against a headwind, at a higher cruising speed than the norm for similar flying boats at that time. Of the six companies tenders had been sent to, only Sikorsky and Martin provided submissions. Sikorsky offered the S-42. The other offer was the more ambitious Martin M-130. The new Sikorsky design, the S-42, had major aerodynamic improvements over the S-40. Igor Sikorsky said, "in its very outline the S-42 represents simplicity. Diverting sharply from the past Sikorsky designs, external bracings have been reduced to a minimum. The tail, instead of being supported by outriggers, is attached directly to the hull." Pan Am would have to wait for the Martin M-130 to have an airliner capable of flying the Pacific with a payload. Pan Am's S-42s were used primarily on the Miami - Rio de Janeiro route. In 1937 S-42s also operated a New York-to-Bermuda service. 1940 saw S-42 flights between Seattle and Alaska. An S-42 was also used between Manila and Hong Kong. British Marine Aircraft Ltd. was formed in February 1936 to produce S-42A flying boats under license in the United Kingdom but nothing came of this. The company built a factory on the western side of the Hamble peninsula with a slipway to Southampton Water. When the deal fell through, the company was sold to Henry Folland, who renamed it Folland Aircraft Limited. ==Operational history==

Flying for Pan American Airways, a total of ten S-42s were built, manufactured by the Vought-Sikorsky Aircraft Division of the United Aircraft Corporation in Stratford, Connecticut. The prototype first flew on March 30, 1934. Pan American was the sole customer for the S-42. The S-42 Pan Am Clipper surveyed the route from the US West Coast to China, making the first survey flight from Alameda, California to Pearl Harbor, Hawaii in April 1935. According to Sikorsky, "Later on, another Pan American S-42 inaugurated the longest over ocean airline in the world from San Francisco to New Zealand. Finally in July, 1937, another S-42 Clipper made the first regular airline crossing of the North Atlantic Ocean starting from the United States, flying first to England by the northern route, and then to Portugal by the Bermuda-Azores route. ==Variants==

;S-42 :Production aircraft with four 700 hp (522 kW) Pratt & Whitney Hornet S5D1G radial engines, three built: NC 822M, NC 823M, NC 824M. ;S-42A :Production aircraft with four 750 hp (559 kW) Pratt & Whitney Hornet S1EG radial engines, longer wings and a 2,000 lb (907 kg) increase in maximum takeoff weight, four built: NC 15373, NC 15374, NC 15375, NC 15376. ;S-42B :Production aircraft with aerodynamic improvements, constant-speed Hamilton Standard propellers and a further 2,000 lb (907 kg) increase in maximum takeoff weight, three built: NC 16734, NC 16735, NC 16736. ;British Marine BM-1 :Proposed licence-built variant of the S-42A, not built. ==Notable accidents and incidents==

On April 11, 1936, a Pan Am S-42 crashed on takeoff from Port of Spain, Trinidad & Tobago, killing three of 25 on board. The pilot swerved to avoid a fishing boat that was in his path but one pontoon struck the boat and the aircraft overturned. On October 3, 1941, Pam Am Flight 203, an S-42A named Dominican Clipper, crashed on landing in the harbour at San Juan, Puerto Rico, killing two of 27 on board. After the approach to San Juan, the aircraft hit the water in a nose-low attitude while moving sideways; after the first contact the aircraft swerved violently to the right and broke apart. On December 8, 1941, a Pan Am S-42B named Hong Kong Clipper II (formerly Bermuda Clipper and Alaska Clipper) was destroyed on the water at Kai Tak Airport, Hong Kong, during a Japanese bombing raid. On July 27, 1943, while docked at Manaus in Brazil a Pan Am S-42B named Bermuda Clipper (formerly Pan American Clipper III) developed an engine fire in response to which a flight engineer pulled the gas dump valve control instead of the fire extinguisher control. The expulsion of fuel spread the fire and the resulting inferno destroyed the aircraft. No one was killed or injured. On August 8, 1944, Pan Am Flight 218, an S-42 named Hong Kong Clipper (formerly West Indies Clipper and Pan Am Clipper I) on a return trip from San Juan to Miami with intermediate stops at Port-au-Prince and Antilla, Cuba, crashed shortly after taking off from Antilla. After striking, bow first, the flying boat left the water in a slightly nose-high attitude, then returned, and by the third time, stalled. There were 17 fatalities (all passengers) out of the 26 passengers and five crew. ==Specifications (S-42)==