Curtiss SOC Seagull

The SOC was ordered for production by the United States Navy in 1933 and first entered service in 1935. The first order was for 135 SOC-1 models, which was followed by 40 SOC-2 models for landing operations and 83 SOC-3s. A variant of the SOC-3 was built by the Naval Aircraft Factory and was known as the SON-1. ==Operational history==

The first ship the SOC was assigned to was the light cruiser in November 1935; by the end of the decade, the SOC had replaced its predecessor throughout the fleet. Production came to an end in 1938. By 1941, most battleships had transitioned to the Vought OS2U Kingfisher and cruisers were expected to replace their aging SOCs with the third generation SO3C Seamew. The SO3C, however, suffered from a weak engine and plans to adopt it as a replacement were scrapped. The SOC, despite belonging to an earlier generation, went on to execute its missions of gunfire observation and limited range scouting missions. Through the first six months of naval service, the SOC was known as the XO3C-1, The designation was changed to SOC when it was decided to merge its scouting and observation roles. The SOC was not called the Seagull until 1941, when the U.S. Navy began the wholesale adoption of popular names for aircraft in addition to their alpha-numeric designations. The name 'Seagull' had earlier been given to two civil Curtiss aircraft, a Curtiss Model 18 and a Model 25, both converted Curtiss MF flying boats. When operating as a seaplane, returning SOCs would land on the relatively smooth ocean surface created on the sheltered side of the vessel as it made a wide turn, after which the aircraft would be winched back onto the deck. When the SOC was replaced by the OS2U Kingfisher, most remaining airframes were converted into trainers; they remained in use until 1945. With the failure of the Curtiss SO3C Seamew, many SOCs in second line service were returned to frontline units starting in late 1943. They saw service aboard warships in the combat zone for the rest of World War II. This is one of the few instances in aviation history in which an older aircraft type, that was retired or sent to second line service, replaced the new aircraft type that was intended to replace it. In certain roles such as an observation aircraft for battleships, they served until 1949, and were eventually superseded by longer range radar and helicopters. ==Variants==

; XO3C-1 (Curtiss Model 71): Prototype aircraft, powered by 550 hp (410 kW) Pratt & Whitney R-1340-12 engine. One built, redesignated XSOC-1 on 23 March 1935. ; SOC-1 (Curtiss Model 71A): Initial production version, with 550 hp (410 kW) Pratt & Whitney R-1340-18 engine enclosed in NACA cowling. Interchangeable float and wheeled undercarriage. 135 built. ; SOC-2 (Curtiss Model 71B): Minor changes, with R-1340-22 engine. 40 built. Wheeled undercarriage only. ; XSO2C-1 (Curtiss Model 71C): Improved version. One prototype only, no production. ; SOC-3A: All SOC-4s were transferred to the U.S. Navy in 1942 (BuNo 48243, 48244, 48245, respectively), which modified them SOC-3A standard, meaning the fitting of a deck arrester gear. ; SOC-4 (Curtiss Model 71F): The U.S. Coast Guard acquired the final three SOC-3 Seagulls produced by Curtiss in 1938 and these were designated as SOC-4s. They were assigned the USCG call numbers V171, V172, and V173. ; SO2C: One built for evaluation based on the SOC-3, but with a 5-foot fuselage stretch and powered by a R-1340-35. ; SON-1: SOC-3 aircraft produced by the Naval Aircraft Factory, 64 built. ==Operators==

; • United States Navy • United States Marine Corps • United States Coast Guard ==Specifications (SOC-1 floatplane)==