Argentina Argentina was one of the first countries in Latin America to run apprenticeship and vocational programs. From 1903 to 1909 basic programs were delivered at main cities. The entity charged with delivering these programs was the
General Workers' Union (Spanish: Unión General de Trabajadores; abbreviated UGT), an Argentine national labor confederation. The massive development of vocational education in Argentina took place during the period between
World War I and
World War II, with the large influx of immigrants from Europe. During the presidency of
Juan Perón, the first formal apprenticeship and vocational training programs were offered free of charge across the country, eventually becoming the National Workers' University (Universidad Obrera Nacional) under the National Vocational Programs Law 13229, implemented on August 19, 1948. These programs were created and supported by the federal government and delivered by provincial governments at various technical colleges and regional universities as well as industrial centers; they were meant to deal with the lack of technical specialists in Argentina at a time of rapid industrialization expansion across the country. The degrees granted were that of technician and factory engineer in many specialties. Currently, vocational education programs are delivered by public and private learning organizations, supported by the Argentine Ministry of Labour and Ministry of Education. The leading providers of technical and vocational education in the country are the
National Technological University (UTN) (Universidad Tecnológica Nacional, UTN) and the
National University of the Arts (UNA) (Universidad Nacional de las Artes, UNA).
Australia In
Australia vocational education and training is mostly post-secondary and provided through the vocational education and training (VET) system by
registered training organisations. However some secondary schools do offer school-based apprenticeships and traineeships for students in years 10, 11 and 12. There were 24 Technical Colleges in Australia but now only 5 independent Trade Colleges remain with three in Queensland; one in Townsville (Tec-NQ), one in Brisbane (Australian Trade College) and one on the Gold Coast (
Australian Industry Trade College) and one in Adelaide and Perth. This system encompasses both public,
TAFE, and private providers in a national training framework consisting of the Australian Quality Training Framework,
Australian Qualifications Framework and Industry Training Packages which define the competency standards for the different vocational qualifications. Australia's apprenticeship system includes both apprenticeships in "traditional" trades and "traineeships" in other more service-oriented occupations. Both involve a legal contract between the employer and the apprentice or trainee and provide a combination of school-based and workplace training. Apprenticeships typically last three to four years, traineeships only one to two years. Apprentices and trainees receive a wage which increases as they progress through the training scheme. The states and territories are responsible for providing funding for government subsidised delivery in their jurisdiction and the Commonwealth Government, through the Australian Skills Quality Authority, provides regulation of registered training organisations except in Victoria and Western Australia. A central concept of the VET system is "national recognition", whereby the assessments and awards of any one registered training organisation must be recognised by all others, and the decisions of any VET regulatory authority must be recognised by the all states and territories. This allows national portability of qualifications and units of competency. A crucial feature of the training package (which accounts for about 60% of publicly funded training and almost all apprenticeship training) is that the content of the vocational qualifications is theoretically defined by industry and not by government or training providers. A Training Package is endorsed by the Australian Industry and Skills Committee before it can be used by RTOs to deliver Nationally Accredited Training. The National Centre for Vocational Education Research or NCVER is a not-for-profit company owned by the federal, state and territory ministries responsible for training. It is responsible for collecting, managing, analysing, evaluating and communicating research and statistics about vocational education and training (VET). The boundaries between vocational education and tertiary education are becoming more blurred. A number of vocational training providers such as
Melbourne Polytechnic,
BHI and
WAI are now offering specialised bachelor's degrees in specific areas not being adequately provided by universities. Such applied courses include equine studies, winemaking and viticulture, aquaculture, information technology, music, illustration, culinary management and many more.
Bangladesh Integrating women or men into areas of specialization in which they were previously under-represented is important to diversifying opportunities for TVET. The National Strategy for Promotion of Gender Equality in TVET in
Bangladesh set clear priorities and targets for breaking gender stereotypes. The Strategy developed by a Gender Working Group comprising fifteen representatives from government ministries and departments, employers, workers and civil society organizations. It provided an overview of the current status and nature of gender inequalities in TVET, highlighted the priority areas for action, explored a number of steps to promote equal participation of women in TVET, and outlined the way forward.
Finland In
Finland, vocational education belongs to secondary education. After the nine-year comprehensive school, almost all students choose to go to either a
lukio (high school), which is an institution preparing students for tertiary education, or to a vocational school. Both forms of secondary education last three years, and give a formal qualification to enter university or
ammattikorkeakoulu, i.e., Finnish polytechnics. In certain fields (e.g., the police school,
air traffic control personnel training), the entrance requirements of vocational schools include completion of the
lukio, thus causing the students to complete their secondary education twice. The education in vocational school is free, and students from low-income families are eligible for a state student grant. The curriculum is primarily vocational, and the academic part of the curriculum is adapted to the needs of a given course. The vocational schools are mostly maintained by
municipalities. After completing secondary education, one can enter higher vocational schools (
ammattikorkeakoulu, or
AMK) or universities. It is also possible for a student to choose both lukio and vocational schooling. The education in such cases lasts usually from three to four years.
France and the Netherlands The
baccalauréat professionnel in
France, and the
middelbaar beroepsonderwijs (MBO) count work experience in the area they are specializing in. A law (the
Berufsausbildungsgesetz) was passed in 1969 which regulated and unified the vocational training system and codified the shared responsibility of the state, the unions, associations and
Industrie- und Handelskammer (chambers of trade and industry). The system is very popular in modern Germany: in 2001, two-thirds of young people aged under 22 began an apprenticeship, and 78% of them completed it, meaning that approximately 51% of all young people under 22 have completed an apprenticeship. One in three companies offered apprenticeships in 2003; in 2004 the government signed a pledge with industrial unions that all companies except very small ones must take on apprentices. From 2010 to 2023, the number of young people starting dual vocational training, has fallen. In recent years, Germany has invested a great deal of money to keep young people in the school system as long as possible. Apprenticeships enhanced content within occupational training courses and considerable emphasis has been placed on personal skills. programs aim to equip individuals with the technical and professional skills they need to drive the country's socioeconomic and industrial development. Notably, these programs place a strong emphasis on preparing Ghanaians for self-employment, empowering them to become not just employees but also job creators. In Ghana, TVET programs are designed specifically to address the needs of young Ghanaians who have completed Junior High School eager to acquire practical skills for immediate employment. There are new TVET schools under the
Free education Policy under the auspices of the Government of Ghana set up to increase access and to purposely train students in pure technical skills. This is geared towards immediate job placement, this focus on hands-on learning and skill development sets Technical Vocational Institutes and Polytechnics apart from traditional universities, preparing graduates to hit the ground running in the workforce. Ghana's Technical Universities, an upgrade of Polytechnics, have received a major boost with the introduction of state-of-the-art laboratories. These labs are equipped with industry-standard training systems, prioritizing a hands-on approach to education. This focus fosters a dynamic teaching and learning environment while simultaneously preparing graduates with the practical skills they need to hit the ground running in the industrial market. By providing technical knowledge and vocational skills in areas like agriculture, industry, commerce, science, and technology, vocational and technical programs at the tertiary level act as a catalyst for national development in these crucial sectors. The
Ministry of Education (Ghana) alongside the National Vocational Training Institute (NVTI), Commission for Technical and Vocational Education and Training (COTVET), and National Accreditation Board (NABTEX), has made significant strides in modernizing vocational education. With the support of the private sector and industry. The introduction of STEM programs in specialized secondary schools alongside the expanded access to senior high schools, demonstrates a clear commitment to improving education equity. Furthermore, initiatives like the retooling of technical schools with advanced equipment are equipping graduates with the practical skills needed for success in various industries. The upgrade of technical universities is also strategic move to strengthen TVET by offering advanced training opportunities in high-level technical skills. This, in turn, will provide a structured progression path for students coming from technical and vocational programs at the secondary level, contributing to a more skilled workforce. These efforts address the national skills gap and contribute to Ghana's industrialization goals.
Greece In
Greece, vocational education and training (VET) is usually for
lyceum (senior high school) graduates and is provided by public or private Schools of Higher Vocational Training [formerly known as Institute of Vocational Training (IEK) (IEK, the Greek abbreviation for the Ινστιτούτο Επαγγελματικής Κατάρτισης). The IEK course offerings are
adult education only, except at times when it is rarely offered a course for non-adult students. The duration of study is two-and-a-half academic years full-time, 2 ½ years. 4 semesters in-school education and 1 semester being known as curricular
practicum or on-the-job placement or
internship, both involve a legal contract between the employer and the student-trainee on the job placement and provide a combination of school-based training and workplace practicum. Public IEKs are government-funded with
free education, and it can be attended without tuition fee.
Hong Kong In
Hong Kong, vocational education is usually for post-secondary 6 students. The Hong Kong Institute of Vocational Education (IVE) provides training in nine different vocational fields, namely: applied science, business administration, child education and community services, construction, design, printing, textiles and clothing, hotel service and tourism studies, information technology, electrical and electronic engineering, and mechanical, manufacturing and industrial engineering.
Hungary Normally at the end of elementary school (at age 14) students are directed to one of three types of upper secondary education: one academic track (gymnasium) and two vocational tracks. Vocational secondary schools (szakgimnázium) provide four years of general education and also prepare students for the
maturata (school leaving certificate). These schools combine general education with some specific subjects, referred to as pre-vocational education and career orientation. At that point many students enrol in a post-secondary VET programme often at the same institution a vocational qualification, although they may also seek entry to tertiary education. Vocational training schools (szakiskola) initially provide two years of general education, combined with some pre-vocational education and career orientation, they then choose an occupation, and then receive two or three years of vocational education and training focusing on that occupation—such as bricklayer. Students do not obtain the
maturata but a vocational qualification at the end of a successfully completed programme. Demand for vocational training, both from the labour market and among students, has declined while it has increased for upper secondary schools delivering the
maturata.
India Vocational training in India historically has been a subject handled by the
Ministry of Labour, other
central ministries and
various state-level organizations. To harmonize the variations and multiplicity in terms of standards and costs, the
National Skills Qualification Framework was launched in December 2013. Work education has been included in the primary standards (grades 1–8) to make the students aware of work. At the lower secondary level (grades 9–10) pre-vocational education has been included with the aim to increase students’ familiarity with the world of work. As a continuation of its efforts to harmonize and consolidate skill development activities across the country, the Government launched the 1st
Skill India Development Mission (NSDM) on 15 July 2015. Also launched on the day was the National Policy for Skill Development & Entrepreneurship. Today all skill development efforts through the Government (Directorate General of Training) and through the Public Private Partnership arm (
National Skill Development Corporation) are carried out under the Ministry, through the Skill India Mission. The Ministry works with various central ministries and departments and the State government in implementing the NSQF across all Government funded projects, based on a five-year implementation schedule for complete convergence. The involvement of the private sector in various aspects of skill development has enhanced access, quality, and innovative financing models leading to sustainable skill development organizations on the ground. The short-term skill development programs (largely offered by private organizations) combined with the long-term programs offered by the Indian technical institutes (ITIs) complement each other under the larger framework. Credit equivalency, transnational standards, quality assurance and standards are being managed by the Ministry through the National Skill Development Agency (an autonomous body under the Ministry) in close partnership with industry-led sector-specific bodies (Sector Skill Councils) and various line ministries. India has bilateral collaboration with governments including those of the UK, Australia, Germany, Canada, and the UAE, with the intention of implementing globally acceptable standards and providing the Indian workforce with overseas job mobility.
Iran The
Iran Technical and Vocational Training Organization or in brief
I.R.T.V.T.O is one of the organizations affiliated to the
Ministry of Cooperatives, Labour, and Social Welfare, which was formed from the merger of three educational institutions in 1980 in order to provide technical and vocational education. In addition to the central headquarters, this organization has 31 general administrations in provinces of
Iran, an instructor training center, 552 Learning Center and over 11700 free technical and vocational schools. In order to achieve the latest science and technology news and to comply with international standards, the organization always tried to expand international relations, including with the
International Labour Organization (ILO) and the International Organization for Vocational Training in other countries. In this regard, the organization, regardless of the interpretation of the overall organizational structure, carries out its activities only in the field of education, with the support of the research field.
TVET is mostly presented by TVTO which is the most pervasive skill training body in Iran, which attempts to meet the skill needs of the labor market and also updates the skills of employees with the latest technologies. It functions as the provider and executor of informal technical and vocational training in agriculture, industry, services, culture, and art. TVTO has headquarters in the capital city of Tehran, an instructor training center(ITC) in Karaj city, 31 provincial head offices, 641 public training centers, 4710 public workshops, and over 12000 private institutions across the country. The
Technical and Vocational University (
TVU) (,
Danushgah-e Feni-ye Herfehai) includes higher education that runs all
technical/vocational colleges across the country. The main objective of this University, training technicians in the majors technical. 4/5 of majors are belongs to
Associate degree and 1/5 belongs to
Bachelor's degree. The university has more than 176 schools and colleges across the country, and with more than 180 thousand students, it is one of the largest universities in
Iran. there are all of the technical and vocational Majors. To achieve the goals, TVTO holds 3-18-month training courses for job seekers and employees in different sectors. Along with training programs, there are activities of research, construction, equipment and development of human resources, most importantly including: codifying training standards based on international codes, research, updating training standards, research in training programs, training aids, audiovisuals, setting up and equipping workshops of training centers, setting up new workshops, guilds’ skill testing, determining the technical competence of applicants of private institutions, holding specialized conferences, issuing skill certificates for construction workers.
Iraq It is a new experiment in Iraq about TVET, there are three ministries related to TVET in Iraq, the Ministry of Higher Education and scientific research which is represented by the technical universities, the Ministry of Education which is represented by the vocational education foundation, and the Ministry of Labor and Social Guaranty which is represented by vocational training centers. These associations are trained by UNESCO for the last three years on the main topics and fields of TVET, so they are now waiting for the Iraqi Perelman to put a suitable law for the TVET Council in Iraq to start its system and control these associations with the required outputs of TVET.
Israel Israel offers a post-high school college education system for technical occupations and engineering, aimed at high-school graduates of technological tracks. Students demonstrating technological potential in schools supervised by the
Ministry of Labor, Social Affairs, and Services (MOLSA) may avail themselves of the MENTA Program, which provides scholastic, emotional, and social support throughout their high school and college studies. This support helps students meet the scholastic challenges and demands of the vocational track and, via the program, strives to expand both the number of youth continuing through college Grades 13-14 and the percentage eligible for a diploma at the end of their studies. The program was formulated by JDC-Ashalim in cooperation with the HEZNEK organization, the
Ministry of Education, the
Ministry of Economy (and subsequently, MOLSA), and by education networks operating schools. A 2016-17 formative evaluation of MENTA found that the program was successful in helping students complete their matriculation, strengthen their sense of
self-efficacy, and create for themselves a picture of the future. At the same time, the findings suggested that program better clarify the target population, improve the supports for transition to college, and more clearly define the scope of the coordinators' role.
Japan Japanese vocational schools are known as . They are part of Japan's
higher education system. They are two-year schools that many students study at after finishing high school (although it is not always required that students graduate from high school). Some have a wide range of majors, others only a few majors. Some examples are
computer technology,
fashion, and
English.
Kazakhstan Vocational education (TVET) in
Kazakhstan is a recognized level of education aimed at equipping students with the knowledge, skills, and competencies for specific professions or trades. Institutions providing vocational education include specialized schools (), colleges, and higher-education institutions. The overall structure, curricula, admission procedures, and governance of vocational institutions are determined by national legislation and model-rule regulations, with each institution implementing its own charter. Education under TVET programs combines theoretical instruction with industrial or practical training, often including apprenticeships at enterprises or training workshops. Training may be delivered full-time, in the evening, via correspondence, or online, depending on the specialty and institution. State regulation ensures citizens can receive free vocational education under a state-order system if it is their first time obtaining that level of education. Kazakhstan first announced plans to provide free technical and vocational education in 2014, aiming to give school leavers without a profession their first vocational qualification, and the policy was formally implemented in 2017 under the national program "Free Vocational and Technical Education for All", which expanded state-order funding and guaranteed tuition-free places for eligible first-time TVET students; by 2025, the initiative was further extended so that all vocational and technical colleges universally offered free training in priority, in-demand specialties. As of 2023, 67,500 people completed short-term vocational courses, and the national online platform trained 57,700 adults, 14,600 of whom gained employment. Due to increase demands of blue-collar workers, vocational-education system in Kazakhstan is undergoing major reforms with President
Kassym-Jomart Tokayev declaring 2025 as the "Year of Working Professions", which launched a modernization program to expand enrollment, upgrade infrastructure, and strengthen industry cooperation.
South Korea Vocational high schools offer programmes in five fields: agriculture, technology/engineering, commerce/business, maritime/fishery, and home economics. In principle, all students in the first year of high school (10th grade) follow a common national curriculum, In the second and third years (11th and 12th grades) students are offered courses relevant to their specialisation. In some programmes, students may participate in workplace training through co-operation between schools and local employers. The government is now piloting Vocational Meister Schools in which workplace training is an important part of the programme. Around 40% of secondary students are currently enrolled in TVET education, in some schools, academic and vocational students share almost 75% of the curriculum.
Malaysia Skills training are no longer depicted as second-class education in
Malaysia. There are numerous vocational education centres here including vocational schools (high schools to train skilled students), technic schools (high schools to train future engineers) and vocational colleges all of them under the Ministry of Education. Then there are 33
polytechnics and 86 community colleges under the Ministry of Higher Education; 10 MARA Advanced Skills Colleges, 13 MARA Skills Institutes, 286 GIATMARAs under Majlis Amanah Rakyat (MARA) and 15 National Youth Skills Institutes under Ministry of Youth and Sports. The first vocational institute in Malaysia is the
Industrial Training Institute of Kuala Lumpur established in 1964 under the Manpower Department. Other institutes under the same department including 8 Advanced Technology Training Centres, one Centre for Instructor and Advanced Skill Training, one Japan-Malaysia Technical Institute and the other 21 ITIs.
Mexico In
Mexico, both federal and state governments are responsible for the administration of vocational education. Federal schools are funded by the federal budget, in addition to their own funding sources. The state governments are responsible for the management of decentralised institutions, such as the State Centres for Scientific and Technological Studies (CECyTE) and Institutes of Training for Work (ICAT). These institutions are funded 50% from the federal budget and 50% from the state budget. The state governments also manage and fund "decentralised institutions of the federation", such as CONALEP schools. Compulsory education (including primary and lower secondary education) finishes at the age of 15 and about half of those aged 15-to-19 are enrolled full-time or part-time in education. All programmes at upper secondary level require the payment of a tuition fee. The upper secondary vocational education system in Mexico includes over a dozen subsystems (administrative units within the Upper Secondary Education Undersecretariat of the Ministry of Public Education, responsible for vocational programmes) which differ from each other to varying degrees in content, administration, and target group. The large number of school types and corresponding administrative units within the Ministry of Public Education makes the institutional landscape of vocational education and training complex by international standards. Vocational education and training provided under the Upper Secondary Education Undersecretariat includes three main types of programme: • "Training for work" (formación para el trabajo) courses at ISCED 2 level are short training programmes, taking typically three to six months to complete. The curriculum includes 50% theory and 50% practice. After completing the programme, students may enter the labour market. This programme does not provide direct access to tertiary education. Those who complete lower secondary education may choose between two broad options of vocational upper secondary education at ISCED 3 level. Both programmes normally take three years to complete and offer a vocational degree as well as the baccalaureate, which is required for entry into tertiary education. • The title "technical professional – baccalaureate" (profesional técnico — bachiller) is offered by various subsystems though one subsystem (CONALEP) includes two thirds of the students. The programme involves 35% general subjects and 65% vocational subjects. Students are required to complete 360 hours of practical training. • The programme awarding the "technological baccalaureate" (bachillerato tecnológico) and the title "professional technician" (técnico professional) is offered by various subsystems. It includes more general and less vocational education: 60% general subjects and 40% vocational subjects. The social partners participate actively in the development of policy. As of January 1, 2012 they formed a foundation for Co operation Vocational Education and Entrepreneurship (St. SBB – stichting Samenwerking Beroepsonderwijs Bedrijfsleven; www.s-bb.nl). Its responsibility is to advise the Minister on the development of the national vocational education and training system, based on the full consensus of the constituent members (the representative organisations of schools and of entrepreneurship and their centres of expertise). Special topics are Qualification & Examination, Apprenticeships (BPV-Beroepspraktijkvorming) and (labourmarket) Efficiency of VET. The Centres of Expertices are linked to the four vocational education programmes provided in senior secondary VET on the content of VET programmes and on trends and future skill needs. The Local County Vocational Training (MBO Raad www.mboraad.nl) represents the VET schools in this foundation and advise on the quality, operations and provision of VET.
New Zealand New Zealand is served by 11 Industry Training Organisations (ITO). The unique element is that ITOs purchase training as well as set standards and aggregate industry opinion about skills in the labour market. Industry Training, as organised by ITOs, has expanded from apprenticeships to a more true lifelong learning situation with, for example, over 10% of trainees aged 50 or over. Moreover, much of the training is generic. This challenges the prevailing idea of vocational education and the standard layperson view that it focuses on apprenticeships. One source for information in New Zealand is the Industry Training Federation. Another is the Ministry of Education. Polytechnics, Private Training Establishments, Wananga and others also deliver vocational training, amongst other areas.
Nigeria The educational system or structure of
Nigeria has been changing over time. In the 1970's, the Nigerian educational system was 6-5-4. This changed as time passed, between 1980 and 2005, it was changed to 6-3-3-4. 2008 saw another educational system review to 9-3-4 system of education. All these reviews are shown in the National Policy on Education. Due to the type of education Nigeria inherited from her colonial masters, education in the 1960's were more book oriented. On 31 May 2025, the Nigeria’s government through its minister of education launched TVET, aimed at tackling at rising unemployment in the country.
Norway Nearly all those leaving lower secondary school enter upper secondary education, and around half follow one of nine vocational programmes. These programmes typically involve two years in school followed by two years of apprenticeship in a company. The first year provides general education alongside introductory knowledge of the vocational area. During the second year, courses become more trade-specific. Apprentices receive a wage negotiated in collective agreements ranging between 30% and 80% of the wage of a qualified worker; the percentage increase over the apprenticeship period. Employers taking on apprentices receive a subsidy, equivalent to the cost of one year in school. After the two years vocational school programme some students opt for a third year in the "general" programme as an alternative to an apprenticeship. Both apprenticeship and a third year of practical training in school lead to the same vocational qualifications. Upper secondary VET graduates may go directly to Vocational Technical Colleges, while those who wish to enter university need to take a supplementary year of education. The social partners participate actively in the development of policy. The National Council for Vocational Education and Training advises the Minister on the development of the national vocational education and training system. The Advisory Councils for Vocational Education and Training are linked to the nine vocational education programmes provided in upper secondary education and advise on the content of VET programmes and on trends and future skill needs. The National Curriculum groups assist in deciding the contents of the vocational training within the specific occupations. The Local County Vocational Training Committees advise on the quality, provision of VET and career guidance.
Paraguay In
Paraguay, vocational education is known as
Bachillerato Técnico and is part of the
secondary education system. These schools combine general education with some specific subjects, referred to as pre-vocational education and career orientation. After nine years of
Educación Escolar Básica (Primary School), the student can choose to go to either a
Bachillerato Técnico (Vocational School) or a
Bachillerato Científico (High School). Both forms of secondary education last three years, and are usually located in the same
campus called
Colegio. After completing secondary education, one can enter to the universities. It is also possible for a student to choose both Técnico and Científico schooling.
Poland In
Poland vocational programmes for the technical occupations are the part of the public system of post-secondary academic education. Post-secondary vocational school (post-secondary technical school) in Poland is known as
Szkoła Policealna. It is an equivalent to a technical college in English-speaking countries. Admission to Post-secondary School in Poland is contingent upon the completion of secondary education. Post-secondary vocational schools offer professional training programs lasting to 2.5 years, including mandatory completion of
internships at enterprises. The completion of Post-secondary vocational school in Poland results in the awarding of a technical diploma. Post-secondary educational programs focus on practical and technical skills required for the work in specific industries, such as
information technology, electronics,
mechatronics, construction. In the field of information technology, such education includes training for
programmers,
database administrators and analysts, computer network specialists, and hardware specialists. In the field of electronics, it includes training for electronic circuit designers and
microelectronics specialists. According to the
International Standard Classification of Education, the academic program of a post-secondary school in Poland is classified as ISCED 4.
Russia A new approach to vocationalization of secondary schooling has been introduced within the framework of general educational reform. This has been guided by the Ministry of Education's strategy of modernization. Vocationalization in the Russian Federation refers to the introduction of profile education at the upper-secondary level (the last two years of schooling, grades 10 and 11) and the process of preparation for profile selection. Profile education provided students with the opportunity to study a chosen area in depth, usually one that would be related to their further study (TVET or academic). Schools could design their own profiles, e.g. science, socio-economics, humanities, and technology, or keep a general orientation curriculum. In preparation for the upper-secondary specialization, a ′pre-profiling′ programme in grade 9 has been introduced to help students make their choices in grade 10. There are typically two courses imparted until graduation. Each titulation is called a
Ciclo, heavily specialized depending on its related professional discipline. Spanish vocational education also features a
Dual education system named
Formación Profesional Dual, although not all Vocational Schools may feature it.
Sri Lanka Vocational training from Agricultural subjects to ICT related subjects are available in Sri Lanka. In 2005 the Ministry of Vocational and Technical Training (MVTT) introduced the National Vocational Qualifications (NVQ) framework which was an important milestone for the education, economic and social development of Sri Lanka. The NVQ framework consists of seven levels of instruction. NVQ levels 1 to 4 are for craftsmen designation and successful candidates are issued with National certificates. NVQ levels 5 and 6 are Diploma level, whereas Level 7 is for degree equivalent qualification. Training courses are provided by many institutions island wide. All training providers (public and private) must obtain institutional registration and course accreditation from the Tertiary and Vocational Education Commission (TVEC).In order to obtain registration institutions must satisfy specific criteria: infrastructure, basic services, tools and equipment, quality of instruction and staff, based on curriculum and syllabus, and quality of management and monitoring systems. Government Ministries and Agencies involved in Vocational Training are The Ministry of Vocational and Technical Training (MVTT), The Tertiary and Vocational Education Commission (TVEC), The National Apprentice and Industrial Training Authority (NAITA), The Department of Technical Education and Training (DTET), University of Vocational Technology(UoVT), The Vocational Training Authority (VTA) and the National Youth Services Council (NYSC).
Sweden Nearly all of those leaving compulsory schooling immediately enter upper secondary schools, and most complete their upper secondary education in three years. Upper secondary education is divided into 13 vocationally oriented and 4 academic national programmes. Slightly more than half of all students follow vocational programmes. All programmes offer broad general education and basic eligibility to continue studies at the post-secondary level. In addition, there are local programmes specially designed to meet local needs and "individual" programmes. A 1992 school reform extended vocational upper secondary programmes by one year, aligning them with three years of general upper secondary education, increasing their general education content, and making core subjects compulsory in all programmes. The core subjects (which occupy around one-third of total teaching time in both vocational and academic programmes) include English, artistic activities, physical education and health, mathematics, natural science, social studies, Swedish or Swedish as a second language, and religious studies. In addition to the core subjects, students pursue optional courses, subjects which are specific to each programme and a special project. It is the mainstream upper secondary program serving 65-70% of Swiss young people. It results in one of the lowest youth unemployment rates in Europe. Managers and the staff take pride in their young apprentices. Several Swiss CEOs of big multinational companies and government members have started their own careers as VET-apprentices, for example
Sergio Ermotti, CEO of
UBS. At this level, vocational education and training is mainly provided through the "dual system". Apprentices rotate between workplace, vocational school and industry training centers where they develop complementary practical skills relating to the occupation. They spend the biggest amount of time at the workplace emphasizing the importance of on-the-job training. Rotation can be organised in different ways – either by switching places during the week or by allocating entire weeks to one place and form of learning. The program can also start with most of the time devoted to in-school education and then gradually increase the share of in-company training. Besides the three- or four-year VET programme with Federal VET Diploma, there is also the option of two-year vocational education and training VET programme with Federal VET Certificate for adolescents with lower learning performance. Switzerland draws a distinction between vocational education and training programmes at upper-secondary level, and professional education and training (PET) programmes, which take place at tertiary B level. In 2007, more than half of the population aged 25–64 had a VET or PET qualification as their highest level of education. In addition, universities of applied sciences (Fachhochschulen) offer vocational education at tertiary A level. Pathways enable people to shift from one part of the education system to another.
Turkey Students in
Turkey may choose vocational high schools after completing the 8-year-long compulsory primary and secondary education. Vocational high school graduates may pursue two year-long polytechnics or may continue with a related tertiary degree. According to a survey by
OECD, 38% of 15-year-old students attend vocational study programmes that are offered by
Anatolian vocational,
Anatolian technical, and
technical high schools. Municipalities in Turkey also offer vocational training. The metropolitan municipality of
Istanbul, the most populous city in Turkey, offers year long free vocational programs in a wide range of topics through ISMEK, an umbrella organization formed under the municipality.
United Kingdom The first "Trades School" in the UK was
Stanley Technical Trades School (now
Harris Academy South Norwood) which was designed, built and set up by
William Stanley. The initial idea was thought of in 1901, and the school opened in 1907. The system of vocational education in the UK initially developed independently of the state, with bodies such as the
RSA and
City & Guilds setting examinations for technical subjects. The
Education Act 1944 made provision for a
Tripartite System of
grammar schools,
secondary technical schools and
secondary modern schools, but by 1975 only 0.5% of British senior pupils were in technical schools, compared to two-thirds of the equivalent German age group. Successive recent
British Governments have made attempts to promote and expand vocational education. In the 1970s, the
Business And Technology Education Council was founded to confer
further and
higher education awards, particularly to
further education colleges in the United Kingdom. In the 1980s and 1990s, the
Conservative Government promoted the
Youth Training Scheme,
National Vocational Qualifications and
General National Vocational Qualifications. However, youth training was marginalised as the proportion of young people staying on in
full-time education increased. In 1994, publicly funded
Modern Apprenticeships were introduced to provide "quality training on a work-based (educational) route". Numbers of apprentices have grown in recent years and the
Department for Children, Schools and Families has stated its intention to make apprenticeships a "mainstream" part of
England's education system. In the UK some higher engineering-technician positions that require 4–5 years' apprenticeship require academic study to HNC / HND or higher
City & Guilds level. Apprenticeships are increasingly recognised as the gold standard for work-based training. There are four levels of apprenticeship available for those aged 16 and over: "There is also a perception, deriving from centuries of social stratification and selectivity in the status and provision of different kinds of education in England, that vocational education is inevitably more narrowly utilitarian, less influential and less important than its more academic cousin: advanced ('A') levels. This divide between the sectors of 'vocational' and 'higher' education, in many ways peculiarly English, is also reflected in higher education institutions and occupations (regarding academic credentials and some related provisions). These academic-vocational divisions in the 'English model', together with negative social and political perceptions, have to some extent stymied the debate regarding the significance and relevance of vocational education provision to learning, work and the economy" (Loo and Jameson, 2017, p. 1). The authors suggest that the divisions between further and higher education sectors in England be reconsidered. They (Loo and Jameson, 2017) call for an opening up of new pathways of "occupation-related" provisions that offer greater parity, progression and enhanced social mobility in vocational education across the academic levels of England's educational provision. Loo (2018) uses the term, technical and vocational education and training (TVET) by UNESCO (2012) as in the section below, to offer a more rational term than "vocational" in England, and to reach out to like-minded users in the global educational community. He offers insights into the study of the pedagogy of teachers of work-related programmes. Especially, he investigates the complex issue of how teachers use their know-how in their delivery of work-related programmes. This complexity surrounds the need for these deliverers to have the disciplinary and wider elements relating to knowledge of the relevant work practices, which involves the learning of the type of know-how and its application in their work practices. The combination of these work know-how (e.g. knowledge, experiences, dispositions and values) are then used to enable them to deliver to the learners. These pedagogic activities rely on different types of knowledge and experiences – pedagogic and work-related. The theoretical framework uses, initially, a dual professionalism concept to review the literature sources of knowledge concerning the occupational pedagogy of teachers. From a pedagogic delineation of knowledge, teaching knowledge may include knowledge of the relevant disciplines (Becher 1994; Bernstein 1996; Smeby 1996) such as psychology and sociology (e.g. learning theories) for the education field. Teaching knowledge may be explicit or tacit (Shulman 1987; Polanyi 1966; Nonaka and Takeuchi 1995; Verloop et al. 2001; Loughran et al. 2003; Collins 2010), and may include a teacher's wider life experiences (Clandinin 1985) and occupational or work-related practices (Loo 2012). Knowledge concerning occupational practices (i.e. non-teaching) also requires a base of disciplinary or theoretical know-how that may be explicit and a process of application to specific work contexts and the environment it operates in (Bernstein 1996; Loo 2012). This occupational knowledge base also includes knowledge of procedures, skills (e.g. interpersonal and intrapersonal ones which are usually tacit), techniques, transversal abilities, project management abilities, personal capabilities and occupational capacity/awareness (Eraut 2004; Winch 2014). This knowledge base is a wider spectrum than a pedagogic one. These two forms of knowledge – pedagogic and occupational – may be applied through the processes of recontextualization (Bernstein 1996; van Oers 1998; Barnett 2006, Evans et al. 2010, Loo 2012, 2014). The knowledge forms can be changed through selecting, relocating and refocusing aspects when used in another setting. In particular, the recontextualization processes regarding content (relating to specifications of a programme), pedagogic (relating to teaching activities), occupational (relating to working activities), and work (relating to the systems and processes that are specific to a workplace or organisation). From the initial teaching and occupational dimensions, the final modified know-how of Occupational Pedagogic Knowledge or Occupational Teachers' Capacities is formed via content recontextualization, pedagogic recontextualization, occupational recontextualization, and integrated applied recontextualization (IAR). There are also relevant concepts that offer insights to the application of teaching and occupational know-how. These include knowledgeable practice (Evans 2016), practice architecture (Kemmis and Green 2013), and Systems 1 and 2 (Kahneman 2012). For a detailed description of the theoretical framework, please refer to Chapter 4 in Teachers and Teaching in Vocational and Professional Education (Loo, 2018). The conceptual framework of the occupational pedagogy of teachers is illustrated on page 50 (Loo 2018). The analysed empirical data is discussed in the separate sections of TVET, higher and professional education courses, five case studies of fashion and textiles, airline industry, dental hygiene, clinical training in emergency medicine and doctors, and a comparison chapter. These chapters offer critical understandings of how pedagogic and occupational know-how are acquired and applied in highly contextualized pedagogic and occupational contexts culminating in the use of teaching strategies/approaches in teaching sessions. The observations from this investigation include (Loo 2018): 1. there are programme pathways to occupational work 2. occupational pathways are more direct for work-related provisions at higher academic levels than those at the TVET level 3. two strands of practices exist at the outset: teaching and occupational where "basic" disciplinary or theoretical knowledge is used to provide occupational relevance to pedagogic and work-related areas 4. IAR process provides a critical understanding of how the modified teaching, occupational and work capacities are combined to inform the application of appropriate teaching strategies to specific pedagogic settings 5. users acquire the occupational capacities over the course duration, and they include abilities, capabilities, dispositions, experiences, judgement, knowledge, protocols, skill sets and techniques 6. deliverers require the relevant occupational experiences to teach on work-related programmes, and continuous professional development is needed for deliverers to maintain their ongoing professionalism in the two practice strands of teaching and work Finally, this investigation has implications for teachers, managers and policymakers of occupational courses. For teachers, these include insights of the sources and types of knowledge that are acquired, recontextualized and applied for teaching and working in the related occupational areas. Managers need to empathise with the deliverers and support their professional needs, and policymakers need to acknowledge the complexities of teaching in occupational programmes and that the curriculum, professional staff and institution are adequately supported (Loo 2018).
United States Tech-prep programmes in the
United States of America are examples of how the ′blending′ approach was used to help students make the connections between school and work. In year nine, programmes in broad occupational fields such as the health professions,
automotive technology, computer systems networking are offered within general technology studies. The programmes continue for at least two years after the end of secondary school, through a tertiary education or an apprenticeship programme, with students achieving an associate degree or certificate by the end of the programme. ==See also==