Designs for shower facilities vary by location and purpose. There are free-standing showers, but also showers that are integrated into a bathtub. Showers are separated from the surrounding area through watertight curtains (
shower curtain),
sliding doors, or
folding doors, or shower blinds, to protect the space from spraying water. Showers with a level entry
wet room are becoming very popular, mainly due to improvements in waterproofing systems and prefabricated components. Places such as a
swimming pool, a
locker room, or a military facility have multiple showers. There may be communal shower rooms without divisions, or shower stalls (typically open at the top). Many types of showers are available, including complete shower units, which are all-encompassing showers that include the pan, walls, and often the shower head, as well as pieced-together units in which the pan, shower head, and doors are purchased separately. Each type of shower poses different installation issues.
Installation Though the installation requirements of each shower will differ, the installation of a shower in general requires the laying of several
water transportation pipes, including a pipe for hot water and for cold water, and a drainage pipe. The wet areas of a bathroom must be waterproof, and multiple layers of waterproofing can be employed.
Grout is used to fill gaps between tiles, but grout and tile setting materials are generally porous. Tiles are typically waterproof, though a shower pan must be installed beneath them as a safety precaution to prevent water leakage. Thus, small mosaic tiles offer less of a defense than large format tiles. Sub-tile waterproofing is important when tiles are being used. Best practice requires a waterproofing material to cover the walls and floor of the shower area, that are then covered with tile, or in some countries with a sheet material like vinyl. File:Shower_Door_Installation.jpg|Worker installing a glass door File:Repairing shower stall with grout applicator.jpg|Repairing damaged tile in a shower stall with a
caulking gun File:Shower Repair.jpg|Shower repair showing drain piping with trap File:Shower project new diverter valve with connector about to be added.jpg|Diverter valve about to be installed behind a shower
Drainage A shower may be equipped with a second emergency drain outside of the shower in case of overflow. An emergency overflow drain is required in Australia and some European countries.
Shower head A shower head is a perforated
nozzle that distributes water over
solid angle a focal point of use, generally overhead the bather. A shower uses less water than a complete immersion in a
bath. Some shower heads can be adjusted to spray different patterns of water, such as massage, gentle spray, strong spray, and intermittent pulse or combination modes.
Hard water may result in
calcium and
magnesium deposits clogging the head, reducing the flow, and changing the spray pattern. For
descaling, various acidic chemicals or brushes can be used, or some heads have rubber-like jets that can be manually descaled. A homemade remedy is to immerse it in a solution of water and vinegar for a while, since the vinegar can dissolve limescale. Some governments around the world set standards for
water usage and regulate shower heads. For example, in the United States, residential and most commercial shower heads must flow no more than per minute per the
Department of Energy ruling 10 CFR 430. Low-flow shower heads that have a water flow of equal or less than per minute (2.0 gallons per minute), can use water more efficiently by
aerating the water stream, altering nozzles through advanced flow principles, or by high-speed
oscillation of the spray stream. The US EPA administers a voluntary water saving program,
WaterSense, which can certify low-flow shower heads.
Shower and bathtub curtains Curtains can be used in shower or bathtub enclosures with two primary purposes: to provide privacy and to prevent water from flooding or spraying outside the shower or bathtub area. Shower and bathtub curtains usually surround the bath inside the tub or shower area and are held up with
railings or
curtain rods high on the wall or ceiling. To accommodate the different types of bathtub shapes, railings can come in various sizes and are flexible in their design. The curtains are usually made from
vinyl, cloth, or plastic (such as
PEVA). Shower curtains are often used in pairs: an inner liner positioned inside the bathtub or shower enclosure, and an outer decorative curtain. The inner liner serves a primarily functional role by preventing water from escaping the bathing area; it may also have decorative features. The outer curtain is placed outside the tub and is primarily ornamental, contributing to the bathroom's appearance and providing a secondary barrier to water and steam. The bottom portion of the inner curtain often comes with magnetic discs or suction cups, which adhere to the bathtub itself.
Shower and bathtub doors Shower or bathtub doors are
doors (also called screens) used in
bathrooms that help keep water inside a shower or bathtub and are alternatives to shower curtains. They are available in many different styles, such as framed or frameless, sliding or swing. They are usually constructed of aluminium, clear glass, plexiglass, or
tempered glass. Shower doors can come in many different hardware finishes and glass patterns that can match other bathroom hardware, such as faucets and shower heads. There are also shower doors that are in a neo-angle design for use on shower pans that have the neo design as well. The design of the shower pan is essential, as the shower door must be the type required for the pan to work. A shower door requires plastic lining along the edges of the door to protect against water
leaking. File:BernheimerHouseTub.jpg|Bathtub curtain File:A typical American bathroom.jpg|Shower curtain File:Raisable shower door.JPG|
Raisable shower door File:The Lygon Arms, bathroom.jpg|Bathtub door ==Equipment==