Bass guitar

The New Grove Dictionary of Music and Musicians refers to this instrument as an "Electric bass guitar, usually with four heavy strings tuned E1'–A1'–D2–G2." It also defines bass as "Bass (iv). A contraction of Double bass or Electric bass guitar." ''Mottola's Cyclopedic Dictionary of Lutherie Terms'' begins its definition of the instrument as "A bass guitar that produces sound primarily with the aid of electronic devices." According to some authors the proper term is "electric bass". Common names for the instrument are "bass guitar", "electric bass guitar", "electric bass", and simply "bass". and some authors claim that they are historically accurate. A bass guitar whose neck lacks frets is termed a fretless bass. Scale The scale of a bass is defined as the length of the vibrating strings between the nut and the bridge saddles. On a modern 4-string electric bass guitar, 30" (76 cm) or less is considered short scale, 32" (81 cm) medium scale, 34" (86 cm) standard scale and 35" (89 cm) long scale. Long scale is more commonly seen on 5-string basses and above to allow for better resonance of the low B string. The double bass is "acoustically imperfect" like the viola. For a double bass to be acoustically perfect, its body size would have to be twice as that of a cello rendering it practically unplayable, so the double bass is made smaller to make it playable. The pickups in an electric bass guitar addresses the compromises of a double bass by allowing the low notes to be amplified electronically. Pickup Pickups are attached to the body of the guitar beneath the strings. They are responsible for converting the vibrations of the strings into interference of a magnetic field which is converted into analogous electrical voltage sent as input to an instrument amplifier. Strings Bass guitar strings are composed of a core and winding. The core is a wire which runs through the center of the string and is made of steel, nickel, or an alloy. The winding is a smaller gauge wire wrapped around the core. Bass guitar strings vary by the material and cross-sectional shape of the winding. Common string variants include roundwound, flatwound, halfwound (groundwound), coated, tapewound and taperwound strings. Roundwound and flatwound strings feature windings with circular and rounded-square cross-sections, respectively, with half-round strings being a hybrid between the two. Coated strings have their surface coated with a synthetic layer while tapewound strings feature a metal core with a plastic winding. Taperwound strings have a tapered end where the exposed core sits on the bridge saddle without windings. The choice of winding has considerable impact on the sound of the instrument, with certain winding styles often being preferred for certain musical genres. == History ==

1930s , inventor of the modern bass guitar, outside his music store in Seattle, Washington In the 1930s, musician and inventor Paul Tutmarc of Seattle, Washington, developed the first electric bass guitar in its modern form, a fretted four-string instrument designed to be played horizontally in a position similar to a standard guitar. The 1935 sales catalog for Tutmarc's company Audiovox featured the "Model 736 Bass Fiddle", a solid body electric bass guitar with four strings, a scale length, and a single pickup. Around 100 were made during this period. Audiovox also sold their "Model 236" bass amplifier. 1950s In the 1950s, Leo Fender and George Fullerton developed the first mass-produced electric bass guitar. The Fender Electric Instrument Manufacturing Company began producing the Precision Bass, or P-Bass, in October 1951. The design featured a simple uncontoured "slab" body design (with no edge contours) and a single coil pickup, both features similar to a Telecaster. By 1957, the Precision Bass began to resemble the Fender Stratocaster with the body edges beveled for comfort and the pickup changed to a separate halves split coil design. The Fender Bass was a revolutionary instrument for working musicians. In comparison to the upright bass, the bass guitar could be easily transported. When amplified, the bass guitar was also much less prone than acoustic basses to audio feedback. The addition of frets enabled bassists to play in tune more easily than on upright basses (the "precision" of the Fender model) and allowed guitarists to more easily adapt to the new instrument. In 1953, Monk Montgomery became the first bassist to tour with the Fender bass, in Lionel Hampton's postwar big band. Montgomery was also possibly the first to record with the electric bass, in a session on July 2, 1953, with the Art Farmer Septet. Roy Johnson (with Lionel Hampton), and Shifty Henry (with Louis Jordan and His Tympany Five), were other early Fender bass pioneers. Bill Black, who played with Elvis Presley and James Jamerson switched from upright bass to the Fender Precision Bass around 1957. The bass guitar was intended to appeal to guitarists as well as upright bass players, and many early pioneers of the instrument, such as Joe Osborn, and Paul McCartney were originally guitarists. Also in 1953, Gibson released the first short-scale violin-shaped electric bass, the EB-1, with an extendable end pin so a bassist could play it upright or horizontally. In 1958, Gibson released the maple arched-top EB-2 described in the Gibson catalog as a "hollow-body electric bass that features a Bass/Baritone pushbutton for two different tonal characteristics". In 1959, these were followed by the more conventional-looking EB-0 Bass. The EB-0 was very similar to a Gibson SG in appearance (although the earliest examples have a slab-sided body shape closer to that of the double-cutaway Les Paul Special). The Fender and Gibson versions used bolt-on and set necks. Several other companies also began manufacturing bass guitars during the 1950s. Kay Musical Instrument Company began production of the K162 in 1952. Also in 1956, at the German trade fair "Musikmesse Frankfurt", the distinctive Höfner 500/1 viola-shaped bass first appeared, constructed using violin techniques by Walter Höfner, a second-generation violin luthier. Due to its use by Paul McCartney, it became known as the "Beatle bass". In 1957, Rickenbacker introduced the model 4000, the first bass to feature a neck-through-body design in which the neck is part of the body wood. The Burns London Supersound was introduced in 1958. 1960s With the explosion in popularity of rock music in the 1960s, many more manufacturers began making electric basses, including Yamaha, Teisco and Guyatone. Introduced in 1960, the Fender Jazz Bass, initially known as the "Deluxe Bass", used a body design known as an offset waist which was first seen on the Jazzmaster guitar in an effort to improve comfort while playing seated. The Jazz bass, or J-Bass, features two single-coil pickups. Providing a more "Gibson-scale" instrument, rather than the Jazz and Precision, Fender produced the Mustang Bass, a scale-length instrument. The Fender VI, a 6-string bass, was tuned one octave lower than standard guitar tuning. It was released in 1961, and was briefly favored by Jack Bruce of Cream. Gibson introduced its short-scale EB-3 in 1961, also used by Bruce. The EB-3 had a "mini-humbucker" at the bridge position. Gibson basses tended to be instruments with a shorter 30.5" scale length than the Precision. Gibson did not produce a -scale bass until 1963 with the release of the Thunderbird. The first commercial fretless bass guitar was the Ampeg AUB-1, introduced in 1966. In the late 1960s, eight-string basses, with four octave paired courses (similar to a 12 string guitar), were introduced, such as the Hagström H8. 1970s In 1972, Alembic established what became known as "boutique" or "high-end" electric bass guitars. These expensive, custom-tailored instruments, as used by Phil Lesh, Jack Casady, and Stanley Clarke, featured unique designs, premium hand-finished wood bodies, and innovative construction techniques such as multi-laminate neck-through-body construction and graphite necks. Alembic also pioneered the use of onboard electronics for pre-amplification and equalization. Active electronics increase the output of the instrument, and allow more options for controlling tonal flexibility, giving the player the ability to amplify as well as to attenuate certain frequency ranges while improving the overall frequency response (including more low-register and high-register sounds). 1976 saw the UK company Wal begin production of their own range of active basses. In 1974 Music Man Instruments, founded by Tom Walker, Forrest White and Leo Fender, introduced the StingRay, the first widely produced bass with active (powered) electronics built into the instrument. Basses with active electronics can include a preamplifier and knobs for boosting and cutting the low and high frequencies. In the mid-1970s, five-string basses, with a very low "B" string, were introduced. In 1975, bassist Anthony Jackson commissioned luthier Carl Thompson to build a six-string bass tuned (low to high) B0, E1, A1, D2, G2, C3, adding a low B string and a high C string. == See also ==