British Rail Class 55

, the prototype Deltic displayed at Preston Riverside in October 2015 In 1955, the English Electric company produced a prototype diesel locomotive at the Dick, Kerr & Co works in Preston, officially named the DP1 but commonly known as Deltic. This prototype experimentally used two Napier Deltic engines which had been developed for marine applications. These unconventional engines were configured in a triangle with an opposed piston design. They ran at high speed (1,500 RPM) more than twice that of conventionally configured engines, which made them very powerful relative to their size and weight, compared to the conventional diesel engines of the era. The locomotive used two of these engines, both rated at , which gave the locomotive a combined power output of for a weight of 106 tons. The management of the Eastern Region were however unimpressed by the performance of the best conventional diesels of the time, the English Electric Type 4, which for a weight of 133 tons, produced , which meant that their performance was no better than the steam locomotives they were supposed to replace. However, as the Deltic prototype had the necessary power and speed to achieve Gerry Fiennes's desired performance improvements, he persuaded British Railways to purchase a fleet of locomotives based on it. == Production ==

In March 1958, an order was placed with English Electric for a production fleet of 22 locomotives (reduced from the 23 originally planned), replacing more than twice that number (55) of steam locomotives including 35 A4 Pacifics; as steam locomotives require substantial time to clean, fuel, and fire, such a reduction in the number of units could be undertaken without a corresponding reduction in working availability. The full order was worth £3,410,000 (), working out at £155,000 (), per locomotive. Due to the complexity of the engine design, which needed specialist maintenance, the locomotives were purchased under a five year service contract, with English Electric agreeing to maintain them, including their engines and generators, for a fixed price; this was British Rail's first such contract. Additional Deltic engines were produced to enable engines to be exchanged regularly for overhaul while keeping the locomotives in service. English Electric trained the British Rail staff at the Doncaster Works in the techniques of maintaining the engines, and after the contract ended, they took over this responsibility. The production locomotives were built at the Vulcan Foundry at Newton-le-Willows; they were mechanically little changed from the prototype, but differed in appearance with a toned down styling, sporting a more sober colour scheme, and lacking the prototype's large headlight. The production Deltics were also 7 tons lighter than the prototype, weighing in at 99 tons, despite being nearly longer. They were originally planned to be delivered within a year from March 1960, but this deadline was not met, and they were delayed by a year, with the first Deltic entering revenue service in the summer of 1961, with a full service being introduced the following year. The locomotives were assigned to three locomotive depots: Finsbury Park in London, Gateshead near Newcastle, and Haymarket in Edinburgh. Very soon, all were named; the Gateshead and Edinburgh Haymarket locomotives after regiments of the British Army from the North-East of England and from Scotland, respectively, while Finsbury Park followed the London and North Eastern Railway (LNER) tradition of naming locomotives after winning racehorses. At the same time, English Electric built a further ten locomotives which were later classified as the , which had single Napier Deltic engines; these gained the nickname "Baby Deltics" as they were in effect scaled down versions of the Deltics. These locomotives however, were far less successful in service than their larger cousins, and were all withdrawn by 1971. == British Rail service ==

The introduction of the Deltics was a step change in locomotive performance on the East Coast Main Line. Once the entire fleet was delivered into service in 1962, the timetable was accelerated, with the journey time from London to Edinburgh cut by one hour, from seven hours to six; this was enabled by the Deltics' ability to accelerate rapidly and maintain high speed with a heavy train over long distances. This matched the timing of the pre-war A4-hauled Coronation service, but was achieved without priority over other traffic unlike the earlier LNER train; it was also now the timing of normal standard fare expresses throughout the day, and not just a once-a-day premium fare express. As early as 1963, Deltics were recorded exceeding 100 mph, Nock recording 100 mph for 16 miles south of Thirsk with a maximum of ; he went on to say that such speeds in 1963 were "terrific". The ultimate Deltic performance came on 2 February 1978 with a run on the 07:25 from Newcastle to King's Cross. In some respects, the run was set up (the driver was about to retire) but the speeds were record-breaking. The locomotive was 55 008 The Green Howards; it was hauling 10 coaches (343 tons gross), and on the leg from York to London it achieved a timing of 137 min 15 sec. This included various signal stops and other enforced speed reductions; the net time is estimated at 115 min 45sec, an average of start to stop. The train achieved on the flat between Darlington and York, at Offord and whilst descending Stoke Bank. From 1978, the ECML was upgraded to allow 125 mph running, in order to accommodate the InterCity 125s, and although the Deltics were still officially limited to 100 mph, in practice they frequently exceeded this in service. The fastest regular scheduled Deltic service was the Hull Executive between London and , which was inaugurated in May 1978. The down (northbound) working of this service achieved an average speed of from King's Cross to its first stop at , making it the fastest regular locomotive-hauled train in Britain at the time. Maintaining this schedule required sustained periods of running above 100 mph. The published logs of some of these runs show that Deltics cruised at up to . The Hull Executive was one of the last top-link workings by a Deltic, until 1981, when this service was taken over by HST's. The Railway Performance Society estimate that on modern infrastructure (the Selby Diversion etc.) a realistic Deltic-hauled schedule from King's Cross to Edinburgh would be around 4 hours 57 minutes (a theoretical unchecked run being around 4 hours 40 minutes). This would be for a train of 11 coaches and include a stop at Newcastle, the latter city being reached in a scheduled 3 hours 6 minutes. The Deltics had arrived from the manufacturer painted in two-tone green, the dark BR green on top, with a narrower strip of a lighter, lime green along the bottom. This helped to disguise the bulk of the locomotive body. The cab window surrounds were picked out in cream-white. Although delivered without it, they all soon sported the bright yellow warning panel at each end common to all British diesel and electric locomotives, to make them more conspicuous. By 1966 the InterCity branding was introduced, and the Deltics began to be painted in corporate Rail Blue with yellow ends, the change generally coinciding with a works repair and the fitting of air brake equipment, the locomotives originally having only vacuum braking (the first so treated was D9002; the last to be painted blue was D9014). In the early 1970s they were fitted with Electric Train Heating (ETH) equipment to power Mark 2 air-conditioned coaches, while a couple of years later, with the introduction of BR's TOPS computer system, they were renumbered 55 001 to 55 022. The last train was an enthusiast special, the "Deltic Scotsman Farewell", on 2 January 1982, hauled from King's Cross to Edinburgh by 55 015 Tulyar and 55 022 Royal Scots Grey on the return. 55 009 Alycidon shadowed the train in both directions between Peterborough and Newcastle, in case of a failure of the train locomotive. Following the farewell, the surviving Deltics were moved to Doncaster Works, where they were displayed en masse in February 1982, before disposal commenced. • On 5 March 1967, locomotive No. 9004 Queens Own Highlander was hauling a passenger train that overran a signal and was derailed at Conington. Five people were killed and eighteen injured. The signalman had moved a set of points under the train. He was convicted of endangering persons travelling on the railway but was acquitted of manslaughter. He was sentenced to two years' imprisonment. • On 7 May 1969, locomotive No. 9011 The Royal Northumberland Fusiliers was hauling the Aberdonian which derailed at , Northumberland, due to excessive speed on a curve, although 9011 itself remained on the rails. Six people were killed and 46 were injured. • On 16 February 1977, an express passenger train hauled by 55 008 collided with a Class 101 diesel multiple unit operating an empty stock train after failing to stop at . The guard of the express was slightly injured. The cause of the accident was that the brakes on the carriages had become isolated, in a freak event, whilst the train was moving. The train had struck an object on the track, which had caused a traction motor cover to come loose. This struck the handle of the brake isolating cock, closing it and thus separating the brakes between the locomotive and train. Following the collision, the train was diverted onto the Tees Valley line, where it was brought to a halt by the operation of the communication cord in one of the carriages. == Preservation ==

File:All six preserved deltics at Barrow Hill.jpg|All six preserved Deltics at Barrow Hill in August 2006 File:55022 , Carlton on Trent.jpg|55022 Royal Scots Grey passes Carlton-on-Trent in 2010 with an Oxford-Preston charter File:Hugh llewelyn D9009 (7112651275).jpg|D9009 Alycidon (later 55 009) in BR green livery on display at Barrow Hill Roundhouse in April 2012 Six locomotives survive; all have run in preservation and all have operated on the mainline, although 55 015 only ran on the mainline at the Rocket 150 event in 1980. Two cabs are also preserved. Current loco numbers are indicated in bold. Loco details • 'D9000 (55 022) Royal Scots Grey''''' was purchased by the Deltic 9000 Fund and, on 7 September 1983, was handed over in fully running condition after work and a repaint by BR. Its first base was the Nene Valley Railway. The locomotive was sold one year later to Beaver Sports (Yorks) Ltd. and it was based at East Lancashire Railway with 55 022.The aim was to return D9016 to mainline condition once again. D9016 donated one of its two engines to 55 022 in April 2010 to replace one of 55 022's engines, a former marine example that had been temporarily fitted to 55 022 following an earlier engine failure. During 2014 D9016 left the East Lancashire Railway for the Great Central Railway. In January 2015 the locomotive moved to the Washwood Heath site of Boden Rail, for bodywork repairs. D9016, along with classmate 55 022, were later purchased by Locomotive Services Limited. D9016 required a cosmetic overhaul, owing to damaged areas. With the main intention being to return 55 022 to service first parts were taken off D9016 for use on 55 022 and after being given a cosmetic touchup. 16 was returned to its original BR Green with its pre-TOPS number, D9016. The engine would later be moved to Margate for static display at LSL's new museum at the Hornby factory. • 'D9019 (55 019) Royal Highland Fusilier''''' was purchased by the Deltic Preservation Society. Initially based at the North York Moors Railway, along with 55 009, the locomotive subsequently moved and spent several years at both the Great Central Railway and the East Lancashire Railway. It is now based at the Deltic Preservation Society depot at Barrow Hill. In April 2005 it became the first Deltic to be fitted with TPWS equipment. Two cabs were saved after withdrawal: • One cab from 'D9008 (55 008) The Green Howards''''' was acquired when the locomotive was being scrapped at Doncaster Works in August 1982. 55 008 is mounted on a road trailer and has been fitted out with computer simulation equipment which allows anybody to take the controls. In October 2003, the cab was painted to masquerade as British Rail DP2. • One cab from 'D9021 (55 021) Argyll & Sutherland Highlander''''' was acquired when the locomotive was scrapped at Doncaster Works in September 1982. It was privately purchased and positioned within sight of the Great Western Main Line at South Stoke, west of Reading. It was later sold to another private owner before being purchased by the Deltic Preservation Society. It has subsequently been sold on to the South Wales Loco Cab Preservation Group. == Operations after BR withdrawal ==

, after a railtour, on 7 December 2007 Despite the ban on privately owned diesel locomotives operating on BR tracks, railway enthusiasts did not have to wait that long after the final withdrawal of the class to see a Deltic back on the mainline. Following participation in the hastily arranged 'Farewell to the Deltics' open day at British Rail Engineering Limited's Doncaster Works on 27 February 1982, 55 002 left Doncaster under its own power and ran back up the ECML to the National Railway Museum light engine; it was to be some years before a Deltic was officially allowed to run again on the mainline. The next opportunity to see a Deltic back on the mainline and running under its own power was in April 1985 when D9000 was sent (at the request of ScotRail management) light engine from Haymarket depot to Perth for an open day. Following newspaper comments by ScotRail's manager Chris Green around that time there was hope that D9000 might see regular work on ScotRail's lines. Chris Green's move to the management team at the newly created Network SouthEast in 1986 put paid to that. However, that did not end his involvement with D9000. He arranged for Network South East depots to provide accommodation for both D9000 and D9016 and when he moved on to head up Virgin Rail Group D9000 was used on summer Saturday Virgin CrossCountry services in the late 1990s. With the changes taking place on Britain's railways in the 1990s, the outlook changed for preserved diesel locomotives. In British Rail days no privately owned diesel locomotives were allowed to operate on its tracks. With privatisation came open-access railways—the track and infrastructure were owned and operated by Railtrack, who for a fee would allow approved locomotives and trains to operate on their track. Suddenly, the owners of preserved locomotives were on an equal footing with everyone else. In fact, the characteristics of the Deltic locomotives, powerful and capable of cruising at , enabled them to fit more easily onto the modern rail network than other, slower, preserved diesels. In 1996 the Deltic 9000 Fund was incorporated as Deltic 9000 Locomotives Ltd (DNLL) with the objective of returning its locomotives to main-line service and on 30 November 1996 D9000 Royal Scots Grey hauled the 'Deltic Deliverance' charter from Edinburgh to King's Cross. This tour however ended prematurely at Berwick-upon-Tweed after a fire broke out in the loco's engine room. D9000 went on to haul many charter trains and service trains for both Anglia Railways and Virgin CrossCountry until 2003. Subsequently, DNLL's other Deltic, D9016 Gordon Highlander returned to main-line working (it was temporarily painted in a purple and grey livery based upon the house colours of Porterbrook, who helped finance the restoration), as did the Deltic Preservation Society's D9009 Alycidon and 55 019 Royal Highland Fusilier. Between 1997 and 2003 all four main-line certified locomotives saw frequent charter and spot hire use, including on the Venice Simplon Orient Express. A highlight of this period was 22 May 1999, when D9000 Royal Scots Grey, D9009 Alycidon and 55 019 Royal Highland Fusilier were all in operation on the East Coast Main Line on the same day – D9000 running the "George Mortimer Pullman" British Pullman between London Victoria and Bradford Forster Square and the DPS Deltics working two charter trains between King's Cross and York. On the return run from Bradford, D9000 was held in platform 1 at Doncaster, whilst 55 019 passed on the up through line. D9000 then followed 55 019 as far as Belle Isle, where it diverged for the run around London to Victoria. In 2003, DNLL went into liquidation with the result that D9000 and D9016 were sold to private individuals. From July 2003 to March 2005 no Deltics hauled a train on the main line. After a brief return to the main line in 2005 the DPS withdrew their last Deltic (55 019) at the end of 2005, having run three tours during the year. D9015 Tulyar is currently undergoing a full overhaul at Barrow Hill, with the aim of main line operation, whilst 55 002 ''The King's Own Yorkshire Light Infantry'' is currently painted in BR blue, main line certificated, and operates from the National Railway Museum. 55 019 remains in full working order along with D9009, whilst D9016 is currently able to operate on one engine only. On 23 September 2006, 55 022 (D9000) Royal Scots Grey returned to the main line after a lengthy and extensive restoration at Barrow Hill, carried out on behalf of the owners by the DPS. It successfully hauled the SRPS 'Moray Mint' railtour from Edinburgh to Inverness, via Perth on the outward trip and back via Aberdeen. On its second working two weeks later, severe damage occurred to the number 2 end engine. The engine suffered from a leg out of bed, a term which means the engine con-rod breaks out of the engine crankcase. This left Royal Scots Grey still able to operate but on one engine only. By January 2007, the faulty power unit was removed from 55 022, put into storage and replaced by an ex-marine Napier Deltic engine modified for rail use; work was completed by Royal Scots Grey's restoration team in August 2007. After extensive testing at the East Lancs Railway the locomotive hauled its first tour since the previous engine malfunction on RTC's 'Autumn Highlander' with 50 049 and 40 145 in October 2007. 55 022 successfully hauled a number of charter tour services during 2008 but the replacement marine-sourced engine gave rise for concern following the discovery of oil in the coolant and at the end of August the locomotive was removed from future large railtour duties. The locomotive continued working mainline duty by visiting other preserved railway and moving other non-mainline registered locomotives. In mid January 2007, an agreement was reached between heritage railway Peak Rail and the owner of D9016 Gordon Highlander which entailed the move of the locomotive from Barrow Hill to the preserved line for a period of three years. It had been thought that D9016 would receive certain maintenance and restoration while on the railway. However, the sale of the locomotive to the Harry Needle Railroad Company and subsequent announcements indicated that the weekend runs of 27 and 28 September 2008 might be its last prior to component recovery and eventual scrapping. Despite previous indications to the contrary, HNRC put the locomotive up for sale during the last week of September 2008 and although the Gordon Highlander Preservation Group submitted a substantial bid it was not accepted and the immediate future (and owner) of the locomotive was shrouded in some mystery. Subsequently, in October 2008, DRS announced in a press release that it had acquired D9016 Gordon Highlander from Harry Needle Railroad Company (HNRC): "The company is working with HNRC to return the locomotive to operational condition, although at the time of writing (June 2009) the locomotive is still stored at Barrow Hill awaiting attention. While the locomotive is not planned for an immediate return to service, DRS is confident that the locomotive will be returned to mainline service in the future. DRS intends to retain the locomotive's name". On 29 December 2009, it was announced that D9016 had been purchased by Beaver Sports (Yorks) Limited. It has subsequently operated (on one engine) on the East Lancashire Railway and the Great Central Railway, pending work to restore it to full working order. In April 2011, 55 022 was hired in by GB Railfreight for bauxite freight working between North Blyth and the Lynemouth aluminium smelter. This hire was scheduled to last from April to July. From May 2013 to November 2015, 55 022 was chartered by GBRF to transfer First ScotRail EMU's for refurbishment. These included the entire fleet of s, which were moved between Yoker and Kilmarnock. The route taken, partially to prevent false fire alarms in underground tunnels caused by the Deltic engine's emissions, takes the train as far as Craigendoran on the north bank of the Clyde before turning round toward Kilmarnock. On 29 November 2017 it was announced via the official Royal Scots Grey website that 55 022 and D9016, plus all spares, had been sold by Martin Walker to Locomotive Services Limited, with both making the trip to LSL's Crewe Diesel TMD base in December 2017. It is intended that both locomotives will ultimately be repaired (55 022 currently has engine problems and D9016 is coming to the end of bodywork repairs) and operated on the mainline alongside Hosking's sizable locomotive fleet. By June 2018, 55 022 was under repair while D9016 had been placed in store and was transferred, cosmetically restored, to Locomotive Storage Limited's facility at Margate. ==Fleet details==

== Proposed Deltic locomotives ==

A Bo-Bo locomotive, using a single 18-cylinder Deltic engine, was proposed as an alternative to what became the British Rail Class 37 Type 3 locomotive introduced from 1960. A Co-Co "Super Deltic" was proposed but not built. There were three potential designs between weighing between with a maximum axle load of . The locomotives would have looked very similar to the eventual Class 50s, though slightly longer. All three designs would have had two 18-cylinder turbocharged engines, based on the 9-cylinder turbocharged engine used in the British Rail Class 23 "Baby Deltic" and the locomotive would have been designated Class 51. The Class 55's engines were not turbocharged, although they did have centrifugal scavenging blowers. ==Model Railways==

The first OO gauge model was produced by Hornby Dublo in two versions. D9012 "Crepello" was the two-rail version and D9001 "St Paddy" was the three-rail version. The second OO gauge model was produced by Lima, in two versions initially: D9003 "Meld" in BR Green; and 9006 "The Fife & Forfar Yeomanry" in BR Blue. The same models were also released in N gauge (1:160 scale), however these did not last very long, as Lima eventually decided to concentrate its British outline output on OO gauge. Bachmann have since released a new version of the "Deltic", in both the OO gauge "Branchline" range and their N gauge "Graham Farish" range. Bachmann have also produced the "Deltic Prototype" in OO gauge (previously only available as a plastic kit from either Kitmaster or Dapol), however this had been commissioned by Locomotion Models – the model railways arm of the National Railway Museum – and was not generally available in model shops. A "Graham Farish" N gauge model is available, as a stand-alone model, and as part of the "Merseyside Express" train set. In 2012 Hornby Railways launched a version of the BR Class 55, which is basic representation of the prototype as part of their Railroad range in BR Blue and BR Green in OO gauge. This model was essentially the old Lima tooling with a new chassis. Accurascale announced a new range of OO gauge "Deltics", in a wide variety of liveries, which were released in summer 2022. In February 2023 Hornby announced a new diecast Dublo tooling in OO gauge of the Deltic prototype locomotive, English Electric DP1 'Deltic', fitted with sound (R30297TXS). ==See also==

References Sources • {{cite book |title=The Deltics : a symposium |first=Cecil J. |last=Allen |author-link=Cecil J. Allen |isbn=0-7110-0322-X |url=http://catalogue.nla.gov.au/Record/495774 • • • • • ==Further reading==