Trams From 1912 to 1924, United Electric and English Electric (with assistance from
Hong Kong and Whampoa Dock) supplied second- and third-series tramcars for
Hong Kong Tramways. These cars were eventually retired from 1924 to 1930 as the fourth Generation cars were being introduced.
Railways In 1923, English Electric supplied the
EO electric locomotives for the
New Zealand Railways for use between
Arthurs Pass and Otira, in the
Southern Alps. Between 1924 and 1926, they delivered
nine box-cab electric (B+B) locomotives to the Harbour Commissioners of Montreal (later the National Harbours Board); later they were transferred to
Canadian National Railways, where four of them ran until 1995. In 1927, English Electric delivered 20 electric motor cars for Warsaw's
Warszawska Kolej Dojazdowa. During the 1930s, equipment was supplied for the electrification of the
Southern Railway system, reinforcing EE's position in the traction market, and it continued to provide traction motors to them for many years. In 1936, production of
diesel locomotives began in the former tramworks in Preston. Between the late 1930s and the 1950s, English Electric supplied
electric multiple unit trains for the electrified network in and around
Wellington, New Zealand. In 1951 English Electric supplied 3 & 5 car articulated Diesel Electric multiple units to the Egyptian State Railways Egyptian-thumpers. Between 1951 and 1959, English Electric supplied the
National Coal Board with five 51-ton, 400 hp electric shunting locomotives for use on the former Harton Coal Company System at
South Shields (which had been electrified by Siemens in 1908) to supplement the existing fleet of ten ageing Siemens and
AEG locomotives. English Electric took over
Vulcan Foundry and
Robert Stephenson and Hawthorns, both with substantial railway engineering pedigrees, in 1955. In the 1950s and 1960s, English Electric produced nearly 1,000 diesel and electric locomotives, of nine different classes, for
British Rail as part of the
Modernisation Plan. Most of these classes of locomotive gave long service to British Rail and its successor train operating companies, some still being active well into the 21st century.
Aviation PR.9 of the
RAF, 2006 Both Dick, Kerr & Co. and the Phoenix Dynamo Manufacturing Company built aircraft in the First World War, including
flying boats designed by the
Seaplane Experimental Station at
Felixstowe, 62
Short Type 184 and 6
Short Bombers designed by
Short Brothers. Aircraft manufacture under the English Electric name began in Bradford in 1922 with the
Wren but lasted only until 1926 after the last
Kingston flying boat was built. With
War in Europe looming, English Electric was instructed by the
Air Ministry to construct a "shadow factory" at
Samlesbury Aerodrome in Lancashire to build
Handley Page Hampden bombers. Starting with Flight Shed Number 1, the first Hampden built by English Electric made its maiden flight on 22 February 1940 and, by 1942, 770 Hampdens had been delivered – more than half of all the Hampdens produced. In 1940, a second factory was built on the site and the runway was extended to allow for construction of the
Handley Page Halifax four-engined heavy bomber to begin. By 1945, five main hangars and three runways had been built at the site, which was also home to
No. 9 Group RAF. By the end of the war, over 2,000 Halifaxes had been built and flown from Samlesbury. In 1942, English Electric took over
D. Napier & Son, an aero-engine manufacturer. Along with the shadow factory, this helped to re-establish the company's aeronautical engineering division. Post-war, English Electric invested heavily in this sector, moving design and experimental facilities to the former
RAF Warton near Preston in 1947. This investment led to major successes with the
Lightning and
Canberra, the latter serving in a multitude of roles from 1951 until mid-2006 with the
Royal Air Force. At the end of the war, English Electric started production under licence of the second British jet fighter, the
de Havilland Vampire, with 1,300 plus built at
Samlesbury. Their own design work took off after the Second World War under
W. E. W. Petter, formerly of
Westland Aircraft. Although English Electric produced only two aircraft designs before their activities became part of BAC, the design team put forward suggestions for many Air Ministry projects. The aircraft division was formed into the subsidiary
English Electric Aviation Ltd. in 1958, becoming a founding constituent of the new
British Aircraft Corporation (BAC) in 1960; English Electric having a 40% stake in the latter company. The guided weapons division was added to BAC in 1963.
Industrial Electronics The
Industrial Electronics Division was established at Stafford. One of the products produced at this branch was the
Igniscope, a revolutionary design of
ignition tester for petrol engines. This was invented by Napiers and supplied as Type UED for military use during World War 2. After the war, it was marketed commercially as type ZWA.
Mergers, acquisitions and demise In 1946, English Electric took over the
Marconi Company, a foray into the domestic consumer electronic market. English Electric tried to take over one of the other major British electrical companies, the General Electric Company (GEC), in 1960 and, in 1963, English Electric and
J. Lyons and Co. formed a jointly owned company –
English Electric LEO Company – to manufacture the
LEO computer developed by Lyons. English Electric took over Lyons' half-stake in 1964 and merged it with Marconi's computer interests to form
English Electric Leo Marconi (English Electric LM). The latter was merged with
Elliott Automation and
International Computers and Tabulators (ICT) to form
International Computers Limited (ICL) in 1967. In 1968 GEC, recently merged with
Associated Electrical Industries (AEI), merged with English Electric; the former being the dominant partner, the English Electric name was then lost. ==Products==