An operational,
non-fictional cloaking device might be an extension of the basic technologies used by stealth aircraft, such as radar-absorbing dark paint, optical camouflage, cooling the outer surface to minimize electromagnetic emissions (usually
infrared), or other techniques to minimize other EM emissions, and to minimize particle emissions from the object. The use of certain devices to jam and confuse remote sensing devices would greatly aid in this process, but is more properly referred to as "
active camouflage". Alternatively, metamaterials provide the theoretical possibility of making electromagnetic radiation pass freely around the 'cloaked' object.
Metamaterial research Optical
metamaterials have featured in several proposals for invisibility schemes. "Metamaterials" refers to materials that owe their refractive properties to the way they are structured, rather than the substances that compose them. Using
transformation optics it is possible to design the optical parameters of a "cloak" so that it guides light around some region, rendering it invisible over a certain band of wavelengths. These spatially varying optical parameters do not correspond to any natural material, but may be implemented using
metamaterials. There are several
theories of cloaking, giving rise to different types of invisibility. In 2014, scientists demonstrated good cloaking performance in murky water, demonstrating that an object shrouded in fog can disappear completely when appropriately coated with metamaterial. This is due to the random scattering of light, such as that which occurs in clouds, fog, milk, frosted glass, etc., combined with the properties of the metamaterial coating. When light is diffused, a thin coat of metamaterial around an object can make it essentially invisible under a range of lighting conditions.
Active camouflage at certain density ranges absorbs certain bandwidths of broadband waves, potentially rendering an object invisible. However, generating plasma in air is too expensive and a feasible alternative is generating plasma between thin membranes instead. The
Defense Technical Information Center is also following up research on plasma reducing
RCS technologies. A plasma cloaking device was patented in 1991.
Metascreen A prototype Metascreen is a claimed cloaking device, which is just few
micrometers thick and to a limited extent can hide
3D objects from microwaves in their natural environment, in their natural positions, in all directions, and from all of the observer's positions. It was prepared at the
University of Texas at Austin by Professor
Andrea Alù. The metascreen consisted of a 66 micrometre thick polycarbonate film supporting an arrangement of 20 micrometer thick copper strips that resembled a
fishing net. In the experiment, when the metascreen was hit by 3.6 GHz microwaves, it re-radiated microwaves of the same frequency that were out of phase, thus cancelling out reflections from the object being hidden.
Howell/Choi cloaking device University of Rochester physics professor John Howell and graduate student Joseph Choi have announced a scalable cloaking device which uses common optical lenses to achieve visible light cloaking on the macroscopic scale, known as the "
Rochester Cloak". The device consists of a series of four lenses which direct light rays around objects which would otherwise occlude the
optical pathway.
Cloaking in mechanics The concepts of cloaking are not limited to optics but can also be transferred to other fields of physics. For example, it was possible to cloak acoustics for certain frequencies as well as touching in mechanics. This renders an object "invisible" to sound or even hides it from touching. ==See also==