History In 1995, evidence of large-scale
Mesolithic nut processing, some 8,000 years old, was found in a
midden pit on the island of
Colonsay in Scotland. The evidence consists of a large, shallow pit full of the remains of hundreds of thousands of burned hazelnut shells. Hazelnuts have been found on other Mesolithic sites, but rarely in such quantities or concentrated in one pit. The nuts were
radiocarbon dated to 7720±110 BP, which calibrates to . Similar sites in Britain are known only at
Farnham in
Surrey and Cass ny Hawin on the
Isle of Man. This discovery provides insight into communal activity and planning during the period. The nuts were harvested in a single year, and
pollen analysis suggests that all of the
hazel trees were cut down at the same time. The traditional term for an area of cultivated hazelnuts is a
plat.
Cultivars The many
cultivars of the hazel include 'Atababa', 'Barcelona', 'Butler', 'Casina', 'Clark', 'Cosford', 'Daviana', 'Delle Langhe', 'England', 'Ennis', 'Halls Giant', 'Jemtegaard', 'Kent Cob', 'Lewis', 'Tokolyi', 'Tonda Gentile', 'Tonda di Giffoni', 'Tonda Romana', 'Wanliss Pride', and 'Willamette'. Some of these are grown for specific qualities of the nut, including large nut size or early or late fruiting, whereas others are grown as pollinators. The majority of commercial hazelnuts are propagated from root sprouts. In Ireland and the United Kingdom, hazelnuts are sometimes referred to as cobnuts, for which a specific cultivated variety – Kentish cobnuts – is the main variety cultivated in fields known as plats, hand-picked, and eaten green. According to the BBC, a national collection of cobnut varieties exists at Roughway Farm, near
Plaxtol in Kent. They are called cobnuts because cob was a word used to refer to the head or "noggin," and children had a game in which they would tie a string to a hazelnut and use it to try to hit an opponent on the head.
Cropping system In Europe hazelnuts are traditionally grown as multi-trunk trees where the rootstock is formed by the variety itself. To enhance the possibility for mechanization and to prevent
suckering, a single-trunk tree can be formed by
grafting a scion of the desired variety on a
Corylus colurna rootstock. There are different approaches in orchard floor management. Strong infestations of certain weeds can lower the yield. Therefore, to prevent yield loss by competition, herbicides are used to create bare soil. Using cover crops protects the soil and suppresses weed establishment without a yield reduction.
Silvopastoral systems where animals like
pigs are kept in the orchard or
silvoarable systems where crops are grown between the rows could introduce new sources of revenue into the hazelnut production and may have beneficial effects on hazelnut yield by fertilizing the soil through nitrogen fixation or animal dung. These systems limit the plant protection measures, potentially impacting the yield quality and level. There are very few studies on these systems, leading to a higher uncertainty for the producer.
Harvesting Hazelnuts are harvested annually in mid-autumn. As autumn comes to a close, the trees drop their nuts and leaves. Most commercial growers wait for the nuts to drop rather than using equipment to shake them from the tree. The harvesting of hazelnuts is performed either by hand or by manual or mechanical raking of fallen nuts. Four primary pieces of equipment are used in commercial harvesting: the sweeper, the harvester, the nut cart, and the forklift. The sweeper moves the nuts into the center of the rows, the harvester lifts and separates the nuts from any debris (i.e., twigs and leaves), the nut cart holds the nuts picked up by the harvester, and the forklift brings a tote to offload the nuts from the nut cart and then stacks the totes to be shipped to the processor (nut dryer). The sweeper is a low-to-the-ground machine that makes two passes in each tree row. It has a belt attached to the front that rotates to sweep leaves, nuts, and small twigs from left to right, depositing the material in the center of the row as it drives forward. On the rear of the sweeper is a powerful blower to blow material left into the adjacent row with air speeds up to . Careful grooming during the year and patient blowing at harvest may eliminate the need for hand raking around the tree trunk, where nuts may accumulate. The sweeper prepares a single center row of nuts, narrow enough for the harvesting tractor to drive over without driving on the center row. It is best to sweep only a few rows ahead of the harvesters at any given time, to prevent the tractor that drives the harvester from crushing the nuts that may still be falling from the trees. Hazelnut orchards may be harvested up to three times during the harvest season, depending on the number of nuts in the trees and the rate of nut drop due to the weather. The harvester is a slow-moving machine pushed by a tractor, which lifts the material off the ground and separates the nuts from the leaves, empty husks, and twigs. As the harvester drives over the rows, a rotating cylinder with hundreds of tines rakes the material onto a belt. The belt takes the material over a blower and under a powerful vacuum that sucks any lightweight soil, leaves from the nuts, and discharges them into the orchard. The remaining nuts are conveyed into a cart pulled behind the harvester. Once a tote is filled with nuts, the forklift hauls away the full totes and brings empty ones back to the harvester to maximize the harvester's time. Two different timing strategies are used for collecting the fallen nuts. The first is to harvest early when about half of the nuts have fallen. With less material on the ground, the harvester can work faster with less chance of a breakdown. The second option is to wait for all the nuts to fall before harvesting. Although the first option is considered the better of the two, two or three passes do take more time to complete than one. == Production ==